Air Induction Kits
he incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997 Turbo Gen2
- Porsche 997 MKII Turbo 2009>>
This Product Fits:
Porsche 996 GT2 / GT3 / TURBO
Panel Filter Size:
- width - 178mm
- height - 522mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
This Product Fits:
Porsche 997 MKII 2009>>
Cylindrical Filter Size:
- width - 163mm
- height - 171mm
- diameter - 119mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
This Product Fits:
Porsche 997 Turbo GT2 X51 / S 2009>>
Panel Filter Size:
- width - 245mm
- height - 150mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 997 MKII Turbo 2009>>
This Product Fits:
Porsche 997 Turbo 3.8L / S PDK 2008>>
Panel Filter Size:
- width - 187mm
- height - 631mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 997 MKII Turbo 2009>>
Improves cold air induction into the engine and improves power and sound through the rev range; constructed with genuine carbon fiber for strength and durability.
FEATURES:
• Fits all Porsche 997.2 Carrera vehicles 2009-2011
• Improves power by 16 whp and 14 ft-lbs of torque at 5500rpm
• Includes dual dry-style air filters which do no require oiling; simply wash with warm water and re-use
• Intake constructed from genuine carbon fiber
• Direct bolt-on replacement for the factory air box
• Fabspeed Lifetime Limited Warranty
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972COMPAI
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
High performance dual-conical cold air intake with carbon fiber heat shield replaces the factory air box for improved cold air induction and increased power and sound.
FEATURES:
• Fits all Porsche 997.2 Turbo / Turbo S vehicles (2010-2012)
• Dual-conical air intake system is a direct replacement upgrade for the factory airbox
• Significant horsepower and torque improvements
• Includes dual dry-style air filters which do not • require oiling; simply wash down with warm water and re-use
• Includes carbon fiber heatshield to prevent engine heat from entering intake
• Simple bolt-on installation; no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972TCOMPAI
The product you are viewing cross references to these numbers
- Porsche 997 MKII Turbo 2009>>
This Product Fits:
Porsche 911 (996) 3.6L GT2 2001-05
Porsche 911 (996) 3.6L GT3 1999-05
Porsche 911 (996) 3.6L Turbo 2000-05
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33-2189
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
SET of 2
This Product Fits:
Porsche 911 (997) Carrera 3.6L H6 F/I 2009-12
Porsche 911 (997) Carrera 3.8L H6 F/I 2009-12
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-1999
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Fits:
Porsche 997 turbo Gen 1 - 2007 to 2009
Porsche 997 turbo Gen 2 - 2010 to 2013
Product Description
Rennline’s carbon fibre 997 Turbo intake ducts are a great way to give your 997's engine bay a modern facelift and these work in conjunction with our 997 Turbo Intake, to increase airflow and performance.
Made from high quality carbon fibre using the latest technology, our intake ducts are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style.
Take your old plastic pieces out and install ours in their place. Installs in minutes using new factory hardware.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
M66
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
These restrictors mount over the front of the intake throttle body and under the intake boot.
Take Control with Our Restrictor Plate Kit
Harness the power of your vehicle with our Restrictor Plate Kit. It’s designed for the late 997 and 991 air filter system. These precision machined restrictors mount over the front of the intake throttle body and under the intake boot.
What’s Included in Your Purchase
Your purchase includes a set of 10 distinct restrictor plates. This array provides a variety of restriction options. Hence, you can fine-tune your vehicle’s horsepower to your exact needs. This ensures optimal performance for any scenario.
This includes a set of 10 plates that fit over the front of the throttle housing under the intake boot. Easy to install and easy to remove as needed.
Ideal for NASA GTS Preparations
Are you prepping for NASA GTS? Our Restrictor Plate Frame is the perfect tool for you. It allows precise horsepower calibration. Consequently, you can achieve your desired performance level each time. We’ve tested this plate frame on a 996 cup car with fantastic results. The horsepower reduced smoothly, and the air/fuel ratio remained unaffected.
Why Choose Our Restrictor Plate Kit
Our Restrictor Plates offers precise horsepower control. It’s a must-have for racing enthusiasts and those seeking to tailor their vehicle’s performance. Experience the difference of custom tuning with this reliable, efficient tool. Invest in our Restrictor Plates and experience the thrill of tailored performance today.
Fits all 997 Cup and all 991 Cup
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
- Engine Modifications & Upgrades
- ECU Re-Mapping DIY
- Electronic Throttle Booster
- Hi Flow Air Filters
- Diverter Valves
- Short GearShift Kits
- Inter Coolers
- Turbo Chargers
- Performance Plenum
- ECU Reader / Fault Finder
- High Flow Y-Pipe
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- Track & Race Coolant Radiators
- CP Carrillo Connecting Rods
- Brake Hoses Stainless Steel Goodridge