Zoom In

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filteration.

This Product Fits:

Porsche 911 (996) 3.4 Carrera (301bhp) 06/97 - 10/01
Porsche 911 (996) 3.4 Carrera, Carrera 4 (320bhp) 06/99 -
Porsche 911 (996) 3.6 Carrera, Carrera 4, 4S (320bhp) 09/01 -
Porsche 911 (996) 3.6 Carrera, Carrera 4 (345bhp) 05/02 -
Porsche 911 (997) 3.6 Carrera 07/04 -
Porsche 911 (997) 3.8 Carrera S 07/04 -

Zoom In

The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.

The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.

The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.

The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.

Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.

The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.

These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.

The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.


Fits:
Porsche Porsche 996 Carrera C2 3.4L
Porsche Porsche 996 Carrera C4 3.4L
(NOT FOR EARLY CABLE THROTTLE CARS)

Zoom In

The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.

The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.

The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.

The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.

Porsche introduced all 996 C2's with conventional cable throttles while all C4's were equipped with E-gas throttles. This was for the model year 98 in Europe and 99 in the US.

The IPD "Y" designed Cable plenum is a direct factory replacement of the OE "T" style air distributor. The IPD Plenum provides impressive max horsepower gains of 28 in the mid range and an additional 12 horsepower on top.

The IPD Plenum is the absolute single best modification that can be installed on these early under powered 996 Carreras and will transform your Porsche driving experience.

Installation is relatively easy and straight forward for mechanically inclined DIY customers although IPD strongly recommends having a qualified Porsche technician perform any IPD Plenum installation.

To confirm whether your Porsche is a Cable or E-gas throttle simply look at your throttle body for either a black electronic module (E-Gas) or a conventional spring / cable throttle control.


Fits:
Porsche 996 Carrera 2 3.4L 1998-99
Porsche 996 Carrera 4 3.4L 1998-99
(FOR EARLY CABLE THROTTLE CARS)

Zoom In

Recharger Filter Care Service Kit (aerosol)

A six-step maintenance system designed to clean any K&N Filtercharger® Air Filter.

Restores air flow efficiency so your Filtercharger performs like new!

Includes:
6.5 oz. Spray Oil & 12 oz. Filter Cleaner

Please note this item can not be sent out by plane. Deliveries only to European countries by road service

Zoom In

Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive airbox and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected molded from crosslink polyethylene which has the lowest thermal conductivity rating of any single-layered moldable material available on the market today. This is key in keeping intake temperatures low and increasing power.

Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models

Zoom In

K&N High Performance replacement air filter.
- High Air Flow with Excellent Filtration

- Designed to Increase Horsepower and Acceleration Washable and Reusable

- Lasts up to 50,000 miles before cleaning is required depending on driving conditions

- Works with Original Equipment Manufacturer Vehicle Electronics

-Environmentally Friendly, K&N Reusable Air Filters

This Product Fits:


Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera, Carrera 4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera, Carrera 4, 4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera, Carrera 4 (345bhp) 05/2002>>

Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.


This Product Fits:


Porsche 911 (996) 3.4 Carrera 2/4
Porsche 911 (996) 3.6 Carrera 2/4
Porsche 911 (997) 3.6 Carrera 2/4
Porsche 911 (997) 3.8 Carrera 2S /4S

Panel Filter Size:
- width - 171/128mm
- height - 3528mm

Zoom In

Designed to give 25% more air flow, which in turn gives more power.

Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.

The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.

The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.

No “Check engine” lights as you retain the factory MAF.

Please note this item fits MANUAL CARS ONLY Replacing Factory black hose 99611022157.

Kit Contains:
1 x Cold Air Hose
2 x Jubilee Clips
1 x Alloy Stopper plug

*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included