Zoom In

Porsche's launch of the GT3 line marked the return of the purpose built street/track car designed to provide the ultimate Porsche driving experience. The hardcore track focus of the GT3 is reminiscent of the legendary RS line that helped make Porsche famous with driving enthusiasts around the world.

The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.

As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.

The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.

The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).

The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.

Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.

996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body

Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars

In fuel injected engines, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver accelerator pedal input in the main. The throttle body is usually located between the air filter box and the intake manifold, and it is usually attached to, or near, the mass airflow sensor.

The largest piece inside the throttle body is the throttle plate, which is a butterfly valve that regulates the airflow. Have a larger diameter throttle body produces more air flow with equals more power. The upgrades should be used in conjunction with the competition plenums.

This is a 82mm Thottle body.

Zoom In

Recharger Filter Care Service Kit (aerosol)

A six-step maintenance system designed to clean any K&N Filtercharger® Air Filter.

Restores air flow efficiency so your Filtercharger performs like new!

Includes:
6.5 oz. Spray Oil & 12 oz. Filter Cleaner

Please note this item can not be sent out by plane. Deliveries only to European countries by road service

Zoom In

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filteration.

This Product Fits:

Porsche 911 (996) 3.6 GT3 (360bhp) 03/99 - 03/03
Porsche 911 (996) 3.6 Turbo 03/00 -
Porsche 911 (997) 3.6 Carrera GT3 04/06 -

Zoom In

Fits all 996 GT3 Vehicles

- GT3 cars gain +10.6 HP & 7.5 Ft Lbs Torque.

- Fits all GT3 cars worldwide from 1999 ROW to 2004/2005 USA and European models.

-Allows unobstructed airflow to the engine for a MAXIMUM POWER!

- More airflow than any other system available anywhere in the world.

- COLD AIR is force feed to the engine's airfilter by the stock FAN and snorkel. The FAN blows cold air directly onto the airfilter and the intake snorkel dumps cold air directly to the filter.

- Easy to install and saves weight. CNC air craft machined with T304SS drip edge.

-Retains stock MASS AIRFLOW sensor plastic grate and location for maximum power and no Check Engine Light.

-More sports car sound and CUP car sound!

- Reuse either stock OEM paper airfilter or use a K&N / BMC /DesignTek airfilter.

Fits: 996 GT3 2000-2005