Just give us a call - were happy to help! Mon-Fri: 9am - 6pm Sat: 10am - 2pm
+44 (0)208 500 8811 sales@design911.com
We'll get it to you no matter where you are in the world.
Shop in confidence with our secure web store - ensured security with VeriSign.
Vorsteiner V-RT Rear Wing Decklid.The V-RT rear end is enhnaced with a functional carbon composite rear deck lid/engine cover with twin ram air scoops that feed air into the engine bay and air intake for maximum airflow and cooling. Additionally a carbon fiber wing blade enhances the final appearance while increasing down force to the rear of the vehicle at high speeds. Vorsteiner’s Carbon Fiber Honeycomb Matrix (CFHM) structure gives our parts superior stiffness, strength & durability compared to traditional hand laid carbon fiber and fiberglass materials.PLEASE NOTE: Must purchase a Porsche Wire Kit to disable the electronic wing lift from the vehicle. Part number: 997 622 610 70.Fits:Porsche 997 Turbo MKIAvailable options on material:1. DVWP (Dry Vacuum Woven Plastic)2. CFHM (Carbon Fiber Honeycomb Matrix)Please Select below
Vorsteiner V-GT Deklid and Wing BaldeThe V-GT rear decklid and wing serves several purposes to maximize the performance of the 997. The V-GT decklid has been specially designed with integrated 1-piece dual ram air scoops that channel air into the engine compartment during high speed driving. The carbon fiber structure of the decklid also reduces the weight of the rear while retaining superior strength & rigidity.The V-GT lightweight carbon fiber wing blade further optimizes aerodynamics and air flow with its more aggressive wing profile that can be adjusted at different angles to provide the customized levels of downforce for specific racing and track events.Vorsteiner’s Carbon Fiber Honeycomb Matrix (CFHM) structure gives our parts superior stiffness, strength & durability compared to traditional hand laid carbon fiber and fiberglass materials.Fits:Porsche 997 Carrera MKIAvailable options on material:1. DVWP (Dry Vacuum Woven Plastic)2. CFHM (Carbon Fiber Honeycomb Matrix)Please Select below
GT3 Look rear spoiler complete with boot lid and upper bi-plane spoiler Fits:Porsche 997 MKIPorsche 997 MKII 2009>>Material: Made from Fibre Glass GRP
The GT3 RS look rear spoiler complete with factory style side brackets, two piece domed air intake. The top plane spoiler comes with deflecting straight side wing lets. The top spoiler can be ordered in Primer or Carbon finish. Fits:Porsche 997 MKI TurboPorsche 997 MKII Turbo 2009>>Material: Made from Fibre Glass GRP
The GT3 RS look rear spoiler complete with factory style side brackets, two piece domed air intake. The top plane spoiler comes with deflecting straight side wing lets. The top spoiler can be ordered in Primer or Carbon finish. Fits:Porsche 997 MKIPorsche 997 MKII 2009>>Material: Made from Fibre Glass GRP
Bi-Plane Rear Spoiler Type GT for improved down force and aerodynamics. made from high grade GRPmaterial.Fits: Porsche 997 Carrera Porsche 997 Turbo 2007>>*Please note the section for the 3rd brake light is out lined but not cut out so this spoiler are be used with or without the 3rd brake light. If needed your body shop will need to make make the cut out.
Rear spoiler for Porsche 911 (997) , built from 2006 for variant Coupe• Currently, no TÜV approval,• Mounting hardware, if necessary• installation Instructions• The angle adjustable rear wing paintable fiberglass (no carbon).• Engine covers, cover incl RAM AIR system for better supply of fresh air - noticeably more power and higher top speed• Improved aerodynamic properties and freely selectable pressure• Wing has six parts• Rear spoiler is manufactured from high quality fiberglass material.• Excellent surface structure allows simple and inexpensive painting (Product is not painted).• Material is extremely flexible and unbreakable.
Rear bootlid Upgrade to 997 Gen2 C4S Look for Porsche 997. Upgrade your 997 Gen1 or 997 Gen2 to the C4S Look with our replacement boot lid and red strip reflector Includes: 1 x Boot Lid 1 x Red Reflector 6 x Grommets 2 x Fixings 1 x Rubber seal Fits:Porsche Standard 997
Rear Spoiler/Aerofoil GTM Porsche 997 Coupe/ Cabrio, This fixed wing spoiler fits onto the existing rear engine lid by removing the active rear spoiler Fits:Porsche 997 CarreraCoupe / Cabrio / TargaMaterial: GRP
Rear Spoiler/Aerofoil GT2M Porsche 997 Coupe/ Cabrio, This fixed wing spoiler fits onto the existing rear engine lid by removing the active rear spoiler Fits:Porsche 997 CarreraCoupe / Cabrio / TargaMaterial: GRP
Rear Spoiler/Aerofoil GTM Add on. Porsche 997TT Coupe/ Cabrio. This fixed wing spoiler fits onto the existing rear engine lid by removing the active top section of the rear spoiler, the GTM add on wing will still rise and lower like the original one Fits:Porsche 997 TURBOCoupe / Cabrio Material: GRP
The Aerokit Turbo consists of a new front splitter spoiler and a new engine cover with rear spoiler and fixed aerofoil profile. The aerodynamically optimised components minimise lift on both axles, improve stability and emphasise the dynamic lines of the vehicle. In addition to these components, the standard sill trims and standard rear underside can be painted in the colour of the exterior.Note: reduces ground clearance and maximum approach angle on gradients. Front and rear spoilers may not be fitted separately.Fits:Porsche 911 Turbo CoupéKit Includes:-Front Lower spoiler -Rear Lid Bi-plane Spoiler -Rear Lower Spoiler -Lower Side Sill Trims Product Type: Original Porsche
TechArt PU-Rim Rear Spoiler Type I improves aerodynamics and fits to OE rear apron.PU-RIM material.Fits: Porsche 997 Turbo 2007>>
TechArt PU-Rim Rear Spoiler Type II.Spoiler profile reduces the lifting force at the rear axle. Installation on the standard rear spoiler base. PU-RIM material.Fits: Porsche 997 Turbo 2007>>
TechArt PU-Rim Rear Spoiler Type III improves aerodynamics and mounts on standard rear lid. Fits: Porsche 997 C2 / C2S MKI 2005-08Porsche 997 C4 / C4S MKI 2005-08Porsche 997 C2 / C2S MKII 2009>>Porsche 997 C4 / C4S MKII 2009>>
TechArt PU-Rim Rear Spoiler Type II with integrated air intakes, separate wing profile for advanced aerodynamics in combination with front spoiler type I. Not available for 997 CabrioFits: Porsche 997 C2 / C2S MKI 2005-08Porsche 997 C4 / C4S MKI 2005-08Porsche 997 C2 / C2S MKII 2009>>Porsche 997 C4 / C4S MKII 2009>>
TechArt PU-Rim Rear Spoiler Type I improves aerodynamics and fits to OE rear apron.PU-RIM material.Fits: Porsche 997 C2 / C2S MKI 2005-08Porsche 997 C4 / C4S MKI 2005-08Porsche 997 C2 / C2S MKII 2009>>Porsche 997 C4 / C4S MKII 2009>>
Bi-plane rear spoiler with carbon uprights and 3rd brake light.Fits:Porsche Standard 997 and S modelsMaterial: Made from Fibre Glass GRP and CarbonProduct Type: SpeedArt
This rear spoiler is produced to fit on the original engine hood/lid and the original grill is also used in the middle. fits:Porsche Standard 997 and S modelsMaterial: Made from Fibre Glass GRP and CarbonProduct Type: SpeedArt
Rear Spoiler SRS with additional air inlets. The rear spoiler will be fitted on the original engine hood/lid and the original grill will be included. Fits:Porsche Standard 997 and S modelsMaterial: Made from Fibre Glass GRPProduct Type: SpeedArt
Rear spoiler with air intakes (RAM-Air), BTR- wingFor an improved aerodynamic and more downforce.Fits:Porsche 997 TurboMaterial: Made from Fibre Glass GRPProduct Type: SpeedArt
The BTR rear spoiler by speedART for the 997 Turbo has been designed by speedART and is the first piece they had manufactured using AutoCAD to ensure excellent fitment. The wing blade replaces the factory unit* simply and elegantly for added downforce. The piece carries TUV certification important to cars being operated at high speeds Germany. *A special Porche tool is required to remove the OEM wingblade. Formerly known as the RS style.Fits:Porsche 997 TurboMaterial: Carbon FibreProduct Type: SpeedArt
Designed for the 2008 and on Porsche 997 Turbo, the BTR-XL rearwing replaces the stock engine cover using all factory mount points and requires no drilling. This model includes the speedART wingblade made from 100% carbon fiber. Porsche wingblade removal tool required (not included).Fits:Porsche 997 Turbo 2007>>Material: Made from Fibre Glass GRPCarbonProduct Type: SpeedArt
Replica GT3 rear spoiler. Complete rear lid spoiler with adjustable middle section for more down force. Fits:Porsche Standard 997 Material: Made from Fibre Glass GRPProduct Type: Replica
The BTR rear spoiler by speedART for the 997 Turbo has been designed by speedART and is the first piece they had manufactured using AutoCAD to ensure excellent fitment. The wing blade replaces the factory unit* simply and elegantly for added downfoce. The piece carries TUV certification important to cars being operated at high speeds Germany. *A special Porche tool is required to remove the OEM wingblade. Formerly known as the RS style.Fits:Porsche 997 Turbo 2007>>Material: Made from Fibre Glass GRPProduct Type: SpeedArt
