Manifold / Headers

Equal length exhaust manifold with catalytic converter. 
Sold as a pair - left and right



Fits:
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Boxster S - 2012 to 2016

Porsche 981 Boxster GTS -  2012 to 2016
Porsche 981 Boxster Spyder - 2016
Porsche 981 Cayman - 2013 to 2016
Porsche 981 Cayman S - 2013 to 2016
Porsche 981 Cayman GTS - 2013 to 2016
Porsche 981 Cayman GT4 - 2016

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 20hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit no remap required but recommended
• No CEL
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98111321105

The product you are viewing cross references to these numbers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

Exhaust Manifold / header set with cat bypass.



Fits:
Porsche 981 Boxster 2012-16
Porsche 981C Cayman 2014-16

This is a set of manifolds (headers) with catalyst bypass to fit third generation model, known as the 981 (2012-2016) Boxster and Cayman.

After the installation of this product the emission light might come on your dash. To remove it you might need to install the lambda sensor extensions from your existing cat.

This is a high quality, 304 grade stainless steel pair of manifolds with secondary cat bypass (decat). Fitting this part will see a substantial power increase and a little extra noise. Check engine lights may come on once this product is fitted depending on your set-up, typically if this is the only exhaust modification you have made they won't trigger.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109814

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers

Exhaust Manifold to Catalytic Converter Bolt.
M8 x 30. EACH



Fits:
Porsche 997 MKI C2 / C4 / C2S / C4S
Porsche 997 MKII C2 / C4 / C2S / C4S
Porsche 991 MKI C2 / C4 / C2S / C4S

Porsche 987 Boxster MKI
Porsche 987 Boxster MKII
Porsche 981 Boxster MKI

Porsche 987C Cayman MKI
Porsche 987C Cayman MKII
Porsche 981C Cayman MKII

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01024426

The product you are viewing cross references to these numbers

Equal-length performance headers Improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.



FEATURES:
• Fits: all Porsche 981 Boxster/Cayman vehicles (2013+)
• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance
• Adds 13 whp / 21 ft-lbs of torque at 6600RPM when combined with the Maxflo Performance Exhaust System
• Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Composite gaskets are included for a leak proof seal
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981SHDR

The product you are viewing cross references to these numbers

Fabspeed Exhaust long tube race headers.



Get out of the corner fast and maximize your pulling power on the straights! Designed for Race Competition, Drivers Education, PCA club racing, track events, and off-road use. Fabspeed Motorsport 981 Porschelong tube headers with F1 high velocity merge collectors provide maximum exhaust flow from the engine cylinder heads straight into equal length primary header tubes and a INDY Car F1 merge collector. The Fabspeed Motorsport race competition headers are the Worlds Very Finest Race Competition headers Dyno developed and independently proven by Porsche Engine builders world wide. In back to Back independent Dyno testing Fabspeed 981/ GT4 headers outperform "Blo AWay" the competition

Fabspeed's Race Headers for the Porsche 981 Boxster/Cayman are built to optimize the engine's exhaust flow for maximum performance. Our precision-engineered headers add significant horsepower and torque to the wheels. Fabspeed Motorsport Boxster/Cayman headers have been developed and refined over 17 years and used by Professional Racers and IMSA Sanctioning bodies for over decades. You can NOT buy a finer race header developed in USA from a clean sheet of paper.

Set yourself apart from the factory-equipped crowd with these unbeatable performance upgrades and watch your Porsche's power - and your race results - climb. Race headers are a great foundation for any GT4 with PSE and or a GT4 Clubsport/ GT4CS Manthai Racing car.

FEATURES:

• Fits all Porsche 981 Boxster/Cayman vehicles,

• Equal length T304 stainless steel, C.N.C. mandrel bent header pipes for equalized engine pulsing, exhaust scavenging and maximum exhaust flow.

• Long-tube race headers fit all Boxster/Cayman models listed above and are a simple direct BOLT-ON to any OEM 981 muffler/ 981 PSE or any aftermarket muffler designed from OEM spec.

• Dramatic improvement in horsepower and torque throughout the RPM range

• Multi-layer OEM Porsche exhaust manifold gasket additional $70 set.

• 100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.

• F1/NASCAR style high velocity cast merge collectors to pulse wave tuning.

• Direct bolt-on application with no cutting or welding required.

Independently DYNO tested against other brands on 4.0liter to 4.25 liter stroker engines- Fabspeed Motorsport beat out all World-Wide competitors.

• 100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.

• Optional 02 Spacers CATTED SPACERS available to minimize C.E.L occurrences .

• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty. Race track Racing encourage and covered under warranty.

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981LTRHDR

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-18

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-18

The product you are viewing cross references to these numbers