Manifold / Headers

Exhaust Manifold with Catalytic Converter. Reconditioned unit with deposit charge. Refundable on return of old unit.

Fits:
Porsche 987 3.2L Boxster M96.26 Engines

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98711310

The product you are viewing cross references to these numbers

Fits:
Porsche 987 2.7L Boxster M96.25 Engines
Porsche 987 2.7L Cayman M96.25 Engines

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Please note:
Reconditioned exhaust manifolds are sold on an exchange basis, A surcharge of £477.00 will be held and then refunded when the old one is returned.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98711310

The product you are viewing cross references to these numbers

Equal length exhaust manifold with catalytic converter. 
Sold as a pair - left and right



Fits:
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Boxster S - 2012 to 2016

Porsche 981 Boxster GTS -  2012 to 2016
Porsche 981 Boxster Spyder - 2016
Porsche 981 Cayman - 2013 to 2016
Porsche 981 Cayman S - 2013 to 2016
Porsche 981 Cayman GTS - 2013 to 2016
Porsche 981 Cayman GT4 - 2016

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 20hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit no remap required but recommended
• No CEL
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98111321105

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

DesignTek Exhaust manifold / header with catalyst bypass.
Price is for PAIR.



Fits:
Porsche 987.2 Boxster 2.9L / 3.4L 2009-12
Porsche 987C.2 Cayman 2.9L / 3.4L 2009-12

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109876

The product you are viewing cross references to these numbers

Exhaust bolt repair kit for Boxster / 996 / 997 Carrera & Cayman Gen1 1997- 2009 (Not GT3, GT2 or TT engines)



With more and more broken exhaust bolts reported on the water-cooled engines, the headache of repairing a broken bolt is becoming epidemic. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR067, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR067 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR067 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes : anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

Now also includes our SR065D drill guide.

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS12

The product you are viewing cross references to these numbers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

Exhaust heat shield


Fits:
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98710444500

The product you are viewing cross references to these numbers

Designtek Sports Exhaust Manifold / Header.
PRICE IS FOR A PAIR



Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L Manual gearbox only

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606308603

The product you are viewing cross references to these numbers

Exhaust Manifold / header set with cat bypass.



Fits:
Porsche 981 Boxster 2012-16
Porsche 981C Cayman 2014-16

This is a set of manifolds (headers) with catalyst bypass to fit third generation model, known as the 981 (2012-2016) Boxster and Cayman.

After the installation of this product the emission light might come on your dash. To remove it you might need to install the lambda sensor extensions from your existing cat.

This is a high quality, 304 grade stainless steel pair of manifolds with secondary cat bypass (decat). Fitting this part will see a substantial power increase and a little extra noise. Check engine lights may come on once this product is fitted depending on your set-up, typically if this is the only exhaust modification you have made they won't trigger.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109814

The product you are viewing cross references to these numbers

Exhaust Manifold / Header



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109874

The product you are viewing cross references to these numbers

Exhaust Manifold / Header with HJS equivalent CAT



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell HJS equivalent high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi
Manufactured in United Kingdom

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109872

The product you are viewing cross references to these numbers

Exhaust Manifold / Header with Cat Bypass



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

Please note: This is a set of headers with catalyst bypass. After the installation of this product the emission light might come on your dash. To remove it you might need to install the lambda sensor extensions.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 

Please note:
On the video below customer has fitted our headers and sport silencer with secondary cat bypasses. The car on the video has no cats at all!



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109875

The product you are viewing cross references to these numbers

Titanium exhaust manifold bolt M8x27. 
Set of 12  (OE Ref: 99907358901) 



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 986 Boxster 1997-2004
Porsche 987 Boxster 2005-2008
Porsche 987C Cayman 2006-2008
Porsche 996 Carrera 1998-2004
Porsche 997.1 Carrera 2005-2008
Porsche 718 (982) Boxster 2017-2021
Porsche 718 (982C) Cayman 2017-2021

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXLONG12

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers

Exhaust Manifold to Catalytic Converter Bolt.
M8 x 30. EACH



Fits:
Porsche 997 MKI C2 / C4 / C2S / C4S
Porsche 997 MKII C2 / C4 / C2S / C4S
Porsche 991 MKI C2 / C4 / C2S / C4S

Porsche 987 Boxster MKI
Porsche 987 Boxster MKII
Porsche 981 Boxster MKI

Porsche 987C Cayman MKI
Porsche 987C Cayman MKII
Porsche 981C Cayman MKII

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01024426

The product you are viewing cross references to these numbers

Exhaust manifold with catalytic converter. Reconditioned unit with deposit charge. Refundable on return of old unit.



Fits:
Porsche 987 Boxster 2007-08 M97.20 Engines
Porsche 987 Boxster S 2005-08 M97.21 / M97.22 Engines
Porsche 987C Cayman / Cayman S 2006-08 M97.21 / M97.22 Engines

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Exhaust Stainless manifolds and cats.



Fits:
Porsche 987.2 Boxster 2.9L / 3.4L 2009-12
Porsche 987.2C Cayman 2.9L / 3.4L 2009-12

This is a pair of high quality manifolds with built in cats (manicats), a combination both conserving weight as well as torque and boosting the sound and performance of the 987 like any high quality aftermarket exhaust product should.

These manifolds have been designed from scratch for the Porsche 987 and fit perfectly to the car's OE system or to any of our other aftermarket products that fit this vehicle.

The cats in this item are both 200 Cell Sports Cats; the most powerful catalytic converters you can get on the car while still passing an MOT and not requiring a remap to remove check engine errors.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109877

The product you are viewing cross references to these numbers

Performance headers Improve exhaust flow and sports car sound, designed for customer with tuned vehicles as these are catalytic bypass units.



FEATURES:
Fits all Porsche 987.2 Boxster / Cayman vehicles (2009-2012)


• Catalytic converter bypass for maximum performance
• Constructed from T304 stainless steel
• C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Complete with gaskets
• Direct replacement for the OEM headers with no cutting or welding required

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109873

The product you are viewing cross references to these numbers

Equal-length performance headers Improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.



FEATURES:
• Fits: all Porsche 981 Boxster/Cayman vehicles (2013+)
• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance
• Adds 13 whp / 21 ft-lbs of torque at 6600RPM when combined with the Maxflo Performance Exhaust System
• Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Composite gaskets are included for a leak proof seal
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981SHDR

The product you are viewing cross references to these numbers

Fabspeed Exhaust Sport Headers.



Low-end power and sound that you can enjoy every day! The perfect complement to either the factory exhaust system or Fabspeed's performance exhaust systems, these high-flow headers are designed around HJS catalytic converters, making them the best upgrade for more enjoyable street driving and emissions compliance.

Designed with noticeable street performance in mind, these Sport Headers provide an additional 26 whp and 39 ft/lbs of torque at 3600 RPM. This translates to significantly better acceleration and throttle response when powering away from a stop light or merging onto your favorite highway. Thanks to the world-class performance of the HJS catalytic converter cores, your GT4 stays emissions-compliant in most regions and will not throw a Check Engine Light.

In addition to the performance gains, Fabspeed's GT4 Sport Headers also add great character to the exhaust note by improving the overall volume and tone.

FEATURES:
• Fits all Porsche 981 Cayman GT4 / Boxster Spyder vehicles (2015+)
• Includes German-imported 200-cell HJS Sport • Catalytic Converters for maximum performance and reliability
• Adds 26 whp and 39 ft-lbs of torque at 3600RPM, providing significantly better performance during street acceleration
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved exhaust sound
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

PLEASE NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981GT4SHDR

The product you are viewing cross references to these numbers

Equal-length performance headers improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.



FEATURES:

• Fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance
• Optimized for maximum performance with NO check engine light, guaranteed
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Composite gaskets are included for a leak proof seal
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR987SHDR

The product you are viewing cross references to these numbers

Equal-length ULTRA high performance headers with HJS German Imported catalytic converters. Sport headers improve exhaust flow and sports car sound and feature incredible 200-cell HJS German Katalysator



FEATURES:

• Fits all Porsche 987.2 Boxster/Cayman, Cayman R, Boxster Spyder vehicles worldwide all makes models (2009-2012)
• Includes German-imported 200-cell HJS HD EURO 6 certified Sport Catalytic Converters for maximum performance
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Optimized for maximum performance with NO check engine light, guaranteed.
• HJS Germany makes the worlds very best catalytic converters utilizing EMITEC Tier 1 tri-metallic cores and a proprietary precious metal wash coat. Platinum, Palladium, Rhodium.
• Fabspeed Motorsport is the North American, USA / South American Exclusive Importer Distributor for HJS Emissions Technology Deutschland.
• You get the very latest Homologated EURO 6 certified catalytic converters. No OLD stock Obsolete stock or black market/ Grey Market cats.
• Optional Porsche factory OEM multi-layer exhaust manifold gasket set.
• Direct replacement simple BOLT-ON replacement for the OEM Porsche headers. Cant be beat.
• Fabspeed has over 25 years experience in Porsche design, engineering, Dyno development and Street and race track testing get the best.
• HJS Germany partnered with Fabspeed and consults with us on improved designs and increased performance regularly and appointed Fabspeed USA as their licensed importer.
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9872SHDR

The product you are viewing cross references to these numbers

Fabspeed Exhaust long tube race headers.



Get out of the corner fast and maximize your pulling power on the straights! Designed for Race Competition, Drivers Education, PCA club racing, track events, and off-road use. Fabspeed Motorsport 981 Porschelong tube headers with F1 high velocity merge collectors provide maximum exhaust flow from the engine cylinder heads straight into equal length primary header tubes and a INDY Car F1 merge collector. The Fabspeed Motorsport race competition headers are the Worlds Very Finest Race Competition headers Dyno developed and independently proven by Porsche Engine builders world wide. In back to Back independent Dyno testing Fabspeed 981/ GT4 headers outperform "Blo AWay" the competition

Fabspeed's Race Headers for the Porsche 981 Boxster/Cayman are built to optimize the engine's exhaust flow for maximum performance. Our precision-engineered headers add significant horsepower and torque to the wheels. Fabspeed Motorsport Boxster/Cayman headers have been developed and refined over 17 years and used by Professional Racers and IMSA Sanctioning bodies for over decades. You can NOT buy a finer race header developed in USA from a clean sheet of paper.

Set yourself apart from the factory-equipped crowd with these unbeatable performance upgrades and watch your Porsche's power - and your race results - climb. Race headers are a great foundation for any GT4 with PSE and or a GT4 Clubsport/ GT4CS Manthai Racing car.

FEATURES:

• Fits all Porsche 981 Boxster/Cayman vehicles,

• Equal length T304 stainless steel, C.N.C. mandrel bent header pipes for equalized engine pulsing, exhaust scavenging and maximum exhaust flow.

• Long-tube race headers fit all Boxster/Cayman models listed above and are a simple direct BOLT-ON to any OEM 981 muffler/ 981 PSE or any aftermarket muffler designed from OEM spec.

• Dramatic improvement in horsepower and torque throughout the RPM range

• Multi-layer OEM Porsche exhaust manifold gasket additional $70 set.

• 100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.

• F1/NASCAR style high velocity cast merge collectors to pulse wave tuning.

• Direct bolt-on application with no cutting or welding required.

Independently DYNO tested against other brands on 4.0liter to 4.25 liter stroker engines- Fabspeed Motorsport beat out all World-Wide competitors.

• 100% INTENDED for RACING COMPETITION events ONLY. Never ever to be driven or used on the public roads under any circumstances. NOT CARB approved NOT EPA approved and never will be approved. Caveat Emptor.

• Optional 02 Spacers CATTED SPACERS available to minimize C.E.L occurrences .

• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty. Race track Racing encourage and covered under warranty.

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981LTRHDR

The product you are viewing cross references to these numbers

Headers sports Stainless Steel (Titanium Alloy) (PAIR)



Fits:
Porsche Boxster 986 2.5L / 2.7L / 3.2L Manual gearbox only

DesignTek sports headers for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606308601

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (non Turbo)
Porsche 993 All
Porsche 996 (non Turbo)
Porsche 997 (non Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-12

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-18

The product you are viewing cross references to these numbers

Screw plug for lambda hole, M18x1.5 mm.



Fits:
Porsche 924S 2.5L 1987-88 (Engine M44.09/M44.10)
Porsche 944 2.5L 1987-90 (Engine M44.09/M44.10)
Porsche 944 Turbo 2.5L 1985-91
Porsche 944S 2.5L 1986-88 (Engine M44.40)
Porsche 944 2.7L 1988-89
Porsche 944 3.0L 1988-91
Porsche 996 GT3 3.6L 1999-05
Porsche 968 3.0L 1991-95
Porsche 986 Boxster 2.5L 1996-99 (Engine M96.20)
Porsche 986 Boxster S 2.7L-3.2L 1999-04
Porsche 993 3.6L-3.8L 1993-97
Porsche 997 3.6L 2004-08 (Engine M95.05)
Porsche 997 3.8L 2004-08 (Engine M97.01)

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90021901500

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-121

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-18

The product you are viewing cross references to these numbers