Sealey Crankshaft Pulley Handle for use with VS4975 - VS4939
Code: VS4939
Sealey Crankshaft Pulley Handle for use with VS4975Suitable to counter-hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened. Must be used in conjunction with Crank Holding Adaptor in kit VS4975 for Nissan, Renault and Vauxhall vehicles, fitted with Diesel 2.0 dCi engines.• Suitable to counter-hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened.
• Must be used in conjunction with Crank Holding Adaptor in kit VS4975 for Nissan, Renault and Vauxhall vehicles, fitted with Diesel 2.0 dCi engines.
• Model No. VS4939• Suitable to counter-hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened.
• Must be used in conjunction with Crank Holding Adaptor in kit VS4975 for Nissan, Renault and Vauxhall vehicles, fitted with Diesel 2.0 dCi engines.Crankshaft Pulley Handle for use with VS4975
• Must be used in conjunction with Crank Holding Adaptor in kit VS4975 for Nissan, Renault and Vauxhall vehicles, fitted with Diesel 2.0 dCi engines.
• Model No. VS4939• Suitable to counter-hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened.
• Must be used in conjunction with Crank Holding Adaptor in kit VS4975 for Nissan, Renault and Vauxhall vehicles, fitted with Diesel 2.0 dCi engines.Crankshaft Pulley Handle for use with VS4975
Related products
Sealey Petrol Engine Timing Tool - BMW 16, 18, 19, 50 - Chain Drive
Code: VSE118
Sealey Petrol Engine Timing Tool - BMW 1.6, 1.8, 1.9, 5.0 - Chain DriveSuitable for setting the camshaft in the timed position on BMW M40/M43/M70/M73 petrol engines.• Camshaft alignment tool for BMW M40/M43/M70/M73 petrol engines.
• Model No. VSE118• Suitable for setting the camshaft in the timed position on BMW M40/M43/M70/M73 petrol engines.Petrol Engine Timing Tool - BMW 1.6, 1.8, 1.9, 5.0 - Chain Drive
• Model No. VSE118• Suitable for setting the camshaft in the timed position on BMW M40/M43/M70/M73 petrol engines.Petrol Engine Timing Tool - BMW 1.6, 1.8, 1.9, 5.0 - Chain Drive
Sealey Timing Kit Vanos Spanner - BMW Twin Cam
Code: VS4312
Sealey Timing Kit Vanos Spanner - BMW Twin CamUsed when removing and refitting the single Vanos unit on the inlet camshaft.• Used when removing and refitting the single Vanos unit on the inlet camshaft.
• Applications: BMW M50, M52 Vanos engines.
• Model No. VS4312• Used when removing and refitting the single Vanos unit on the inlet camshaft.Timing Kit Vanos Spanner - BMW Twin Cam
• Applications: BMW M50, M52 Vanos engines.
• Model No. VS4312• Used when removing and refitting the single Vanos unit on the inlet camshaft.Timing Kit Vanos Spanner - BMW Twin Cam
Sealey Diesel Engine Setting/Locking Kit - BMW, Land Rover, Vauxhall/Opel - Chain Drive
Code: VS4411
Sealey Diesel Engine Setting/Locking Kit - BMW, Land Rover, Vauxhall/Opel - Chain DriveSetting/Locking Tool Kit includes the camshaft setting plate and crankshaft TDC location pin required to 'set' and 'lock' the engine in its correct timing position. The kit also provides camshaft and injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprockets and/or chains as well as the injection pump. This tool is additionally used to retain and support the sprocket and timing chains in position when the pump has been removed.• Kit includes the camshaft setting plate and crankshaft TDC location pin.
• Also provides chain tensioner retaining pins and injection pump remover, which is used when removing sprockets and/or chains as well as the injection pump. This tool additionally supports the sprocket and timing chains in position when the pump has been removed.
• Applications: BMW M41/M51 Diesel Engines fitted in BMW 318tds, 325, 525, 725td/tds, Land Rover Range Rover 2.5DT/SE (94on), Vauxhall/Opel Omega-B 2.5TD.
• Model No. VS4411• Setting/Locking Tool Kit includes the camshaft setting plate and crankshaft TDC location pin required to 'set' and 'lock' the engine in its correct timing position.
• The kit also provides camshaft and injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprockets and/or chains as well as the injection pump.
• This tool is additionally used to retain and support the sprocket and timing chains in position when the pump has been removed.Diesel Engine Setting/Locking Kit - BMW, Land Rover, Vauxhall/Opel - Chain Drive
• Also provides chain tensioner retaining pins and injection pump remover, which is used when removing sprockets and/or chains as well as the injection pump. This tool additionally supports the sprocket and timing chains in position when the pump has been removed.
• Applications: BMW M41/M51 Diesel Engines fitted in BMW 318tds, 325, 525, 725td/tds, Land Rover Range Rover 2.5DT/SE (94on), Vauxhall/Opel Omega-B 2.5TD.
• Model No. VS4411• Setting/Locking Tool Kit includes the camshaft setting plate and crankshaft TDC location pin required to 'set' and 'lock' the engine in its correct timing position.
• The kit also provides camshaft and injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprockets and/or chains as well as the injection pump.
• This tool is additionally used to retain and support the sprocket and timing chains in position when the pump has been removed.Diesel Engine Setting/Locking Kit - BMW, Land Rover, Vauxhall/Opel - Chain Drive
