Sealey Metal Cutting Bandsaw 115mm 3-Speed with Stand

Sealey Bandsaw 400mm Horizontal Hydraulic ArmManufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved. Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system. Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.• Large cutting capacity.
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast-iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• Model No. SM353CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system.
• Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.400mm Horizontal Hydraulic Arm Bandsaw

Sealey Bandsaw 300mm Horizontal Hydraulic ArmManufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved. Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on individual circuits. Heavy-duty single phase electric motor.• Fully CE approved.
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• 300mm Capacity at 90° and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded and fitted with pulley cover safety switch.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Model No. SM35CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system and main power controls are switched on individual circuits.
• Heavy-duty single phase electric motor.300mm Horizontal Hydraulic Arm Bandsaw

Sealey Metal Cutting Bandsaw 3-Speed 150mm 230VHeavy-duty cast base and horizontal/vertical cutting arm. Saw base features integral mitring vice with scale of 90° to 45° for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life. Stand is fitted with two transport wheels for added workshop mobility.• 3-Speed settings.
• Heavy-duty cast base and cutting arm.
• Oil bath gear box and life lubricated bearings for quiet, smooth operation.
• Full guarded blade and magnetic no-load voltage switch.
• Complies with CE directive 98/37/EEC.
• Model No. SM5• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.

• Heavy-duty cast base and horizontal/vertical cutting arm.
• Saw base features integral mitring vice with scale of 90° to 45° for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life.
• Stand is fitted with two transport wheels for added workshop mobility.150mm 3-Speed Metal Cutting Bandsaw