Porsche
>
Macan (95B) MK1 (2014-2018)
>
Workshop Tools
>
Welding & Cutting
>
MIG Welders
>
Sealey MIG Welder 140Amp 230V
Sealey MIG Welder 140Amp 230V - SUPERMIG140
Code: SUPERMIG140
Sealey MIG Welder 140Amp 230VAll our Supermig® models are suitable for welding with CO2, Argon or CO2/Argon mix. Each uses a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc. Model No. SUPERMIG180 and above are supplied with an industrial Argon/CO2 regulator. A contract for the supply of gas should be arranged with your local gas distributor.• Forced Air Cooling System allows high duty cycle.
• 140Amps maximum output.
• Professional contour grip, heat proof non-live torch ensures no sparks until you press the trigger.
• Proven wire feed system for trouble-free welding.
• Welds stainless and aluminium too.
• Model No. SUPERMIG140• Suitable for welding with CO2, Argon or CO2/Argon mix.
• Features a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc.
• Supplied with a regulator suitable for our range of disposable or refillable gas cylinders (gas is not included).
• Also includes spool of wire, contact tips 0.6 and 0.8mm.140Amp Professional MIG Welder 230V
• 140Amps maximum output.
• Professional contour grip, heat proof non-live torch ensures no sparks until you press the trigger.
• Proven wire feed system for trouble-free welding.
• Welds stainless and aluminium too.
• Model No. SUPERMIG140• Suitable for welding with CO2, Argon or CO2/Argon mix.
• Features a Forced Air Cooling System to slow transformer heating in order to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc.
• Supplied with a regulator suitable for our range of disposable or refillable gas cylinders (gas is not included).
• Also includes spool of wire, contact tips 0.6 and 0.8mm.140Amp Professional MIG Welder 230V
Related products
Sealey Electromig Electronic MIG Welder 195Amp 230V
Code: ELECTROMIG195
Sealey Electromig Electronic MIG Welder 195Amp 230VMicroprocessor controlled MIG welder with forced air cooling. Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium. Also incorporates settings for brazing - ideal for joining/repairing steel body panels. Features push button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.
Use with optional Spool-on-Gun welding torch (Model No. MIG/SGT15 - 6mtr) for trouble free aluminium welding.• Microprocessor controlled MIG welder with forced air cooling.
• Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium.
• Settings for brazing - ideal for joining/repairing steel body panels.
• Push-button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.
• Use with optional Spool-on-Gun welding torches (Model No's. MIG/SGT15 - 6mtr, MIG/SGT15/12 - 12mtr) for trouble free aluminium welding.
• Model No. ELECTROMIG195• Microprocessor controlled MIG welder with forced air cooling.
• Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium.
• Also incorporates settings for brazing - ideal for joining/repairing steel body panels.
• Model features push button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.
• Use with optional Spool-on-Gun welding torches (Model No's MIG/SGT15 - 6mtr) for trouble free aluminium welding.195Amp Professional Powermig® Electronic MIG Welder 230V
Use with optional Spool-on-Gun welding torch (Model No. MIG/SGT15 - 6mtr) for trouble free aluminium welding.• Microprocessor controlled MIG welder with forced air cooling.
• Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium.
• Settings for brazing - ideal for joining/repairing steel body panels.
• Push-button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.
• Use with optional Spool-on-Gun welding torches (Model No's. MIG/SGT15 - 6mtr, MIG/SGT15/12 - 12mtr) for trouble free aluminium welding.
• Model No. ELECTROMIG195• Microprocessor controlled MIG welder with forced air cooling.
• Electronic control and smooth power supply make this model especially suitable for welding steel, stainless steel, galvanized steel, high stress steel and aluminium.
• Also incorporates settings for brazing - ideal for joining/repairing steel body panels.
• Model features push button selection of operating parameters including material, gas type, wire diameter and programmable function for saving frequently used configurations.
• Use with optional Spool-on-Gun welding torches (Model No's MIG/SGT15 - 6mtr) for trouble free aluminium welding.195Amp Professional Powermig® Electronic MIG Welder 230V
Sealey Professional Gas/No-Gas MIG Welder 150Amp 230V
Code: MIGHTYMIG150
Sealey Professional Gas/No-Gas MIG Welder 150Amp 230VOur professional range of MIGHTYMIG welders all feature a heavy-duty high output transformer and forced air cooling to maximize duty cycle performance.
Model No's MIGHTYMIG100 and 150 are supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose (Model No. MIGHTYMIG150 only), 0.45kg flux cored wire and 1.0mm contact tip. Both units are supplied set up in the gasless mode but Model No. MIGHTYMIG150 can be switched easily to use with gas by a simple change of polarity, and the purchase of a gas conversion kit (Model No. 120.802032).
Model No's MIGHTYMIG170, 190 and 210 are supplied with a high quality cool running BINZEL® MB14/15 Euro torch thus ensuring a steadier weld bead, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8 tips. All three units are supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity. Use in gasless mode will require the purchase of a spool of flux cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller.
Model No. MIGHTYMIG250 is supplied with a high quality cool running BINZEL® MB25AK Euro torch, 3mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.8mm wire, 0.8 and 1.0mm tips. Set up in the gas welding mode but can also easily be switched to gasless. Use in gasless mode will require the purchase of a spool of flux cored wire.
To weld aluminium, order a roll of 0.8mm aluminium wire, a packet of 0.8mm contact tips and a bottle of argon gas. See pages xxx to xxx for details of all of the above welding accessories and more.• Heavy-duty high output transformer and forced-air cooling to maximize duty cycle performance.
• 150Amp Maximum current.
• Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 1.0mm contact tip.
• Set up in the no-gas welding mode, but can also easily be switched to gas by simple change of polarity and the purchase of a Gas Conversion Kit - Model No. 120.802032.
• Model No. MIGHTYMIG150• One of our professional MIGHTYMIG range this compact gas/no-gas welder offers excellent performance at an extremely competitive price.
• This unit is set up ready to go in gasless mode but can also be switched easily to use with gas by a simple change of polarity and purchase of a Gas Conversion Kit - Model No. 120.802032.
• Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 1.0mm contact tip.150Amp Professional Gas/No-Gas MIG Welder
Model No's MIGHTYMIG100 and 150 are supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose (Model No. MIGHTYMIG150 only), 0.45kg flux cored wire and 1.0mm contact tip. Both units are supplied set up in the gasless mode but Model No. MIGHTYMIG150 can be switched easily to use with gas by a simple change of polarity, and the purchase of a gas conversion kit (Model No. 120.802032).
Model No's MIGHTYMIG170, 190 and 210 are supplied with a high quality cool running BINZEL® MB14/15 Euro torch thus ensuring a steadier weld bead, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8 tips. All three units are supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity. Use in gasless mode will require the purchase of a spool of flux cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller.
Model No. MIGHTYMIG250 is supplied with a high quality cool running BINZEL® MB25AK Euro torch, 3mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.8mm wire, 0.8 and 1.0mm tips. Set up in the gas welding mode but can also easily be switched to gasless. Use in gasless mode will require the purchase of a spool of flux cored wire.
To weld aluminium, order a roll of 0.8mm aluminium wire, a packet of 0.8mm contact tips and a bottle of argon gas. See pages xxx to xxx for details of all of the above welding accessories and more.• Heavy-duty high output transformer and forced-air cooling to maximize duty cycle performance.
• 150Amp Maximum current.
• Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 1.0mm contact tip.
• Set up in the no-gas welding mode, but can also easily be switched to gas by simple change of polarity and the purchase of a Gas Conversion Kit - Model No. 120.802032.
• Model No. MIGHTYMIG150• One of our professional MIGHTYMIG range this compact gas/no-gas welder offers excellent performance at an extremely competitive price.
• This unit is set up ready to go in gasless mode but can also be switched easily to use with gas by a simple change of polarity and purchase of a Gas Conversion Kit - Model No. 120.802032.
• Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 1.0mm contact tip.150Amp Professional Gas/No-Gas MIG Welder
Sealey Professional Gas/No-Gas MIG Welder 170Amp with Euro Torch
Code: MIGHTYMIG170
Sealey Professional Gas/No-Gas MIG Welder 170Amp with Euro TorchOur professional range of MIGHTYMIG welders all feature a heavy-duty high output transformer and forced air cooling to maximize duty cycle performance.
Model No's MIGHTYMIG100 and 150 are supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose (Model No. MIGHTYMIG150 only), 0.45kg flux cored wire and 1.0mm contact tip. Both units are supplied set up in the gasless mode but Model No. MIGHTYMIG150 can be switched easily to use with gas by a simple change of polarity, and the purchase of a gas conversion kit (Model No. 120.802032).
Model No's MIGHTYMIG170, 190 and 210 are supplied with a high quality cool running BINZEL® MB14/15 Euro torch thus ensuring a steadier weld bead, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8 tips. All three units are supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity. Use in gasless mode will require the purchase of a spool of flux cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller.
Model No. MIGHTYMIG250 is supplied with a high quality cool running BINZEL® MB25AK Euro torch, 3mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.8mm wire, 0.8 and 1.0mm tips. Set up in the gas welding mode but can also easily be switched to gasless. Use in gasless mode will require the purchase of a spool of flux cored wire.
To weld aluminium, order a roll of 0.8mm aluminium wire, a packet of 0.8mm contact tips and a bottle of argon gas. See pages xxx to xxx for details of all of the above welding accessories and more.• Heavy-duty high output transformer and forced air cooling to maximize duty cycle performance.
• 170Amp Maximum current.
• Supplied with a high quality BINZEL® MB14 Euro torch, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8mm tips.
• Set up in the gas welding mode but can also easily be switched to gasless.
• Can be used with large, industrial CO2 gas bottles.
• Model No. MIGHTYMIG170• One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price.
• This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity.
• Supplied with high quality cool running BINZEL® MB14 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips.
• Illustrated with gas bottle to give an indication of size only; gas is not included.
• A contract for the supply of gas should be arranged with your local gas distributor.170Amp Professional Gas/No-Gas MIG Welder with Euro Torch
Model No's MIGHTYMIG100 and 150 are supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose (Model No. MIGHTYMIG150 only), 0.45kg flux cored wire and 1.0mm contact tip. Both units are supplied set up in the gasless mode but Model No. MIGHTYMIG150 can be switched easily to use with gas by a simple change of polarity, and the purchase of a gas conversion kit (Model No. 120.802032).
Model No's MIGHTYMIG170, 190 and 210 are supplied with a high quality cool running BINZEL® MB14/15 Euro torch thus ensuring a steadier weld bead, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8 tips. All three units are supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity. Use in gasless mode will require the purchase of a spool of flux cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller.
Model No. MIGHTYMIG250 is supplied with a high quality cool running BINZEL® MB25AK Euro torch, 3mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.8mm wire, 0.8 and 1.0mm tips. Set up in the gas welding mode but can also easily be switched to gasless. Use in gasless mode will require the purchase of a spool of flux cored wire.
To weld aluminium, order a roll of 0.8mm aluminium wire, a packet of 0.8mm contact tips and a bottle of argon gas. See pages xxx to xxx for details of all of the above welding accessories and more.• Heavy-duty high output transformer and forced air cooling to maximize duty cycle performance.
• 170Amp Maximum current.
• Supplied with a high quality BINZEL® MB14 Euro torch, 2mtr earth cable, 1.4mtr of gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 and 0.8mm tips.
• Set up in the gas welding mode but can also easily be switched to gasless.
• Can be used with large, industrial CO2 gas bottles.
• Model No. MIGHTYMIG170• One of our professional MIGHTYMIG range this large gas/no-gas welder offers excellent performance at an extremely competitive price.
• This unit is set up ready to go in gas mode but can also be switched easily to use gasless by a simple change of polarity.
• Supplied with high quality cool running BINZEL® MB14 Euro torch, 1.8mtr earth cable, 1.4mtr gas hose, twin gauged gas regulator, 1kg spool of 0.6mm wire, 0.6 & 0.8mm contact tips.
• Illustrated with gas bottle to give an indication of size only; gas is not included.
• A contract for the supply of gas should be arranged with your local gas distributor.170Amp Professional Gas/No-Gas MIG Welder with Euro Torch