Electronic Control Units
Reconditioned Cabrio Folding Top Control Unit.
Reconditioned units are sold on an exchange basis, A surcharge of £418.53 will be held and then refunded when the old one is returned.
Genuine
Fits:
Porsche 993 1995-98 CABRIO
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993618313X
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 911 1984-89
Porsche 964 1989-90
Porsche 928 1987-90
Porsche 944 1985-90
Porsche 944 Turbo >>1991
Diagram ref no 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161811302
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £2860.39.00 will be held and then refunded when the old one is returned.
Bosch part no.: 0 261 200 078
Fits:
Porsche 911 3.2L 1986-89
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
911618111LX
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
PORSCHE part no.: 911.618.111.19
Bosch part no.: 0 261 200 078
Engine: 930.20 M240
Fits:
Porsche 911 3.2L 1986-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161811119
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
(Bosch Ref 0227300004)
Classic Retrofit replacement CDI+ ignition offers you bespoke modern electronics in a standard looking package. The CDI+ unit requires no modifications to the original wiring harness or vehicle metalwork and is 'plug and play'.
The CDI+ is a direct replacement for the 3 pin and 6 pin Bosch units fitted to Porsche 911's between 1969 and 1983 (and turbo models to ~1988). All CDI+ units have a 48 MHz microprocessor onboard to control ignition timing.
Advanced Unit:
The advanced unit allows the adjustment/tuning of the ignition advance curve and other features by plugging in a laptop. This can be achieved by 'overlaying' a curve on top of the distributor weights/springs curve or by locking the distributor and replacing the curve completely. Either way, you can unlock the true potential of your engine by adjusting fuelling and having the ignition curve to match.
The CDI+ has all the features of the basic unit but allow more flexibility in adjustment:
-Fully programmable ignition advance curve.
-Hard RPM limiter with adjustable ignition cut schemes
-Soft RPM limiter with adjustable ignition retard
-Launch RPM limiter
-Double spark at all RPMs
-Max RPM tell tale
-Shift Light output
-Clutch pedal input
-Tacho calibration
-Upgradeable through firmware updates
Fits:
Porsche 911 1978-83
Porsche 930 3.3L 1978-89
For 911-CDI+ Ignition Manual CLICK HERE
For 911-CDI+ Dyno Test Results CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93060270200
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Fuel Pumps
- Brake Light Switch
- Handbrake Switch
- Reverse Light Switch
- Headlamp Switch
- Window Switch
- Window Motors
- Window Mechanism
- Wiper Motor
- Wiper Mechanism
- Electric Horn
- Ignition Switch
- Seat Switch
- Indicator / Wiper Stalk Switch
- Roof / Sun Roof Switch
- Relays / Fuses
- Washer pumps / bottles / jets
- Alarms / Security / Central Locking
- Wiper Switches
- Dashboard / Console Parts & Switches
- Door Mirror Switch
- Bonnet / Rear Lid / Spoiler Activators & Motors
- Tracker
- Cruise Control
- Connector housing
- Wiring harness