Ohlins Road & Track Suspension

Adjustable suspension set (without springs)



Fits:
Porsche 991 GT3 (2013 onwards)

General Features:
TTX technology
2-way adjustable
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty
Delivery without springs

Front:
McPherson strut, upside down
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts

Rear:
Conventional shock absorber
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts

Adjustable suspension set. Porsche 911 GT3 RS (991) incl. 120/200 N/mm springs (motorsport kit)



Fits:
Porsche 911 (991) GT3 / 911 (991) GT3 RS 2013>>

General Features:
TTX technology
2-way adjustable
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty

Front:
McPherson strut, upside down
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Spring rate main spring 120 N/mm
Spring rate helper spring 20 N/mm
Dustcovers
Use with original top mounts

Rear:
Conventional Shock Absorber
Twin Tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Spring rate main spring 200 N/mm
Spring rate helper spring 20 N/mm
Dustcovers
Use with original top mounts

CARGRAPHIC AirLift Evolution Upgrade Kit



The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.