SPORTS Brake Disc

Two-piece floating slotted Direct Drive V3 front iron disc PCCB conversion (including road centre-lock wheels).

Dimensions : 410 × 62 × 34 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

410.069.6

The product you are viewing cross references to these numbers

Zimmermann FORMULA Z brake disc.

Vented, Perforated, Two-piece brake disc, Coated
Outer diameter: 380 mm
Brake Disc Thickness: 30 mm
Bolt Hole Circle Ø: 130 mm
Centering Diameter: 98 mm
Weight: 11 kg
Hole Pitch / Number: 7/5




** For cars with central locking wheels.
Porsche 991.1 GT3
Porsche 991.1 GT3 RS

Porsche 991.2 GT3
Porsche 991.2 GT3 RS
Porsche 991.2 R
Not for cars with ceramic brake (PCCB)


The Zimmermann Formula Zbrake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.

Your advantages:

• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135240

The product you are viewing cross references to these numbers

Two-piece floating slotted Direct Drive V3 rear iron disc PCCB disc conversion (including road centre-lock wheels) .

Dimensions : 390 × 65 × 32 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

390.075.6

The product you are viewing cross references to these numbers