Inverters

Sealey Diffuser Pack of 5• Model No. 120/802422• Suitable for use with PP25, PP25PLUS & PP35Diffuser Pack of 5

Sealey Electrode Long Pack of 5• Model No. 120/802428• Suitable for use with PP25 & PP35Electrode Long Pack of 5

Sealey Electrode Short Low Power Pack of 5• Model No. 120/802420• Suitable for use with PP25, PP25PLUS & PP35Electrode Short Low Power Pack of 5

Sealey Electrodes Short High Power Pack of 5• Model No. 120/802421• Suitable for use with PL120/1Electrodes Short High Power Pack of 5

Sealey Inverter 125Amp 230V with Accessory Kit & Carry-CaseCompact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in tough composite carry-case with 10mm² arc welding accessory kit. IP21 rated.• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 rated.
• Model No. MW125• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 rated.125Amp Inverter 230V with Accessory Kit & Carry-Case

Sealey Inverter 130Amp 230V with Accessory KitLightweight, powerful and incredibly versatile, inverters offer many advantages over traditional transformer type welders. Inverters use state-of-the-art electronic components to produce fully portable power sources for arc welding. For example, Model No. MWE160C will produce up to 160Amps at 40% duty cycle; a conventional 160Amp welder would have a duty cycle of around 10%. All weighing under 5kg makes it ideal for the mobile technician or for applications where the power unit needs to be taken to the job. All supplied with earth clamp and electrode holder.• Compact lightweight unit, weighing just 5kg, is suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied with 16mm² arc welding accessory kit.
• Model No. MWE130C• Compact lightweight unit, weighing just 5kg, is suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied with 16mm² arc welding accessory kit.130Amp Inverter 230V with Accessory Kit

Sealey Inverter 150Amp 230V with Accessory Kit & Carry-CaseCompact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in tough composite carry-case with 10mm² arc welding accessory kit. IP21 rated.• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 rated.
• Model No. MW155• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 rated.150Amp Inverter 230V with Accessory Kit & Carry-Case

Sealey Inverter 80Amp 230V with Accessory KitLightweight, powerful and incredibly versatile, inverters offer many advantages over traditional transformer type welders. Inverters use state-of-the-art electronic components to produce fully portable power sources for arc welding. For example, Model No. MWE160C will produce up to 160Amps at 40% duty cycle; a conventional 160Amp welder would have a duty cycle of around 10%. All weighing under 5kg makes it ideal for the mobile technician or for applications where the power unit needs to be taken to the job. All supplied with earth clamp and electrode holder.• Compact lightweight unit, weighing just 3.5kg, is suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied with 10mm² arc welding accessory kit.
• Model No. MWE80C• Compact lightweight unit, weighing just 3.5kg, is suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied with 10mm² arc welding accessory kit.80Amp Inverter 230V with Accessory Kit

Sealey Inverter 80Amp 230V with Accessory Kit & Carry-CaseCompact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in carry-case (cardboard) with 6mm² arc welding accessory kit. IP21 rated.• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case (cardboard) with 6mm² arc welding accessory kit.
• IP21 rated.
• Model No. MW80• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø2.5mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case (cardboard) with 10mm² arc welding accessory kit.
• IP21 rated.80Amp Inverter 230V with Accessory Kit & Carry-Case

Sealey Inverter Arc Welding Kit 16mm²Unless specified, our range of inverters are not supplied with accessory kits, giving you the choice to use for arc or TIG welding. For arc welding order the appropriate kit for your model as below. As well as being suitable for Sealey machines, they can also be used with other makes fitted with Dinse connectors.• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.
• Model No. INVMMA2• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.16mm² Inverter Arc Welding Kit

Sealey Inverter Plasma 25Amp 230VInverter power supply fitted with plasma cutter control circuitry. Inverter features three LED information panel including torch under-voltage, general fault (thermostat, over/under-voltage, over current) and power on. Supplied with plasma torch and earth cable. Utilises contact start torch making it suitable for use near electrical equipment. Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass. Includes integral air filter and regulator unit with pressure gauge. IP23 Rated.• Inverter power supply fitted with plasma cutter control circuitry.
• Features three LED information panel including torch under-voltage, general fault (thermostat, over/under-voltage, over current) and power on.
• Supplied with plasma torch and earth cable.
• Utilises contact start torch - suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air filter and regulator unit with pressure gauge.
• IP23 Rated
• Model No. PP25• Inverter power supply fitted with plasma cutter control circuitry.
• Inverter features three LED information panel including torch under-voltage, general fault (thermostat, over/under-voltage, over current) and power on.
• Supplied with plasma torch and earth cable.
• Utilises contact start torch making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air filter and regulator unit with pressure gauge.
• IP23 Rated.25Amp Plasma Inverter 230V

Sealey Inverter Plasma 25Amp with Compressor 230VWeighing only 12.5kg but with the power to cut up to 6mm steel, this machine features an integral compressor. No more trailing hoses or bottled air, just plug into a power supply and push the trigger. Ideal for mobile repairers and fabricators. Inverter features four LED information panel including torch under-voltage, torch in cooling cycle, general thermostatic/power fault and power on. Supplied with plasma torch and earth cable. Utilises contact start torch making it suitable for use near electrical equipment. Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass. Supplied with torch and earth cable. IP23 Rated.• Weighing only 12.5kg but with the power to cut up to 6mm steel, this machine features an integral compressor.
• No more trailing hoses or bottled air, just plug into a power supply and push the trigger.
• Ideal for mobile repairers and fabricators.
• Inverter features 4 LED information panel including torch under-voltage, torch in cooling cycle, general thermostatic/power fault and power on.
• Supplied with plasma torch and earth cable.
• Utilises contact start torch making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• IP23 Rated.
• Model No. PP25PLUS• Weighing only 12.5kg but with the power to cut up to 6mm steel, this machine features an integral compressor.
• No more trailing hoses or bottled air, just plug into a power supply and push the trigger.
• Ideal for mobile repairers and fabricators.
• Inverter features four LED information panel including torch under-voltage, torch in cooling cycle, general thermostatic/power fault and power on.
• Supplied with plasma torch and earth cable.
• Utilises contact start torch making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Supplied with torch and earth cable.
• IP23 Rated.25Amp Plasma Inverter with Compressor 230V

Sealey Inverter Plasma 40Amp 230VInverter power supply fitted with plasma cutter control circuitry. Inverter features three LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on. Supplied with plasma torch and earth cable. Uses air to strike arc making it suitable for use near electrical equipment. Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass. Includes integral air filter and regulator unit with panel-mounted pressure gauge. IP23 Rated.• Inverter power supply fitted with plasma cutter control circuitry.
• Inverter features three LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on.
• Supplied with plasma torch and earth cable.
• Uses air to strike arc making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air filter and regulator unit with panel-mounted pressure gauge.
• IP23 Rated.
• Model No. PP35• Inverter power supply fitted with plasma cutter control circuitry.
• Inverter features three LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on.
• Supplied with plasma torch and earth cable.
• Uses air to strike arc making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air filter and regulator unit with panel-mounted pressure gauge.
• IP23 Rated.40Amp Plasma Inverter 230V

Sealey Inverter Plasma 40Amp with Compressor 230VWeighing only 16.8kg but with the power to cut up to 10mm steel, this machine features an integral compressor. Inverter power supply fitted with plasma cutter control circuitry. Inverter features four LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on. Supplied with plasma torch and earth cable. Uses air to strike arc making it suitable for use near electrical equipment. Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass. Includes integral air compressor, air filter and regulator unit with panel-mounted pressure gauge. IP23 Rated.• Weighing only 16.8kg but with the power to cut up to 10mm steel, this machine features an integral compressor.
• Inverter power supply fitted with plasma cutter control circuitry.
• Inverter features four LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on.
• Supplied with plasma torch and earth cable.
• Uses air to strike arc making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air compressor, air filter and regulator unit with panel-mounted pressure gauge.
• IP23 Rated.
• Model No. PP35PLUS• Weighing only 16.8kg but with the power to cut up to 10mm steel, this machine features an integral compressor.
• Inverter power supply fitted with plasma cutter control circuitry.
• Inverter features four LED information panel including torch under-voltage, air fault, general fault (thermostat, over/under-voltage, over-current) and power on.
• Supplied with plasma torch and earth cable.
• Uses air to strike arc making it suitable for use near electrical equipment.
• Ideal for cutting steel, stainless, galvanized steel, aluminium, copper and brass.
• Includes integral air compressor, air filter and regulator unit with panel-mounted pressure gauge.
• IP23 Rated.40Amp Plasma Inverter with Compressor 230V

Sealey Inverter TIG Welding Kit 10mm²Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.
• Model No. INVTIG1• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.10mm² TIG Welding Kit

Sealey Inverter TIG Welding Kit 16mm²Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.
• Model No. INVTIG2• Suitable for Sealey and other leading brands of inverter fitted with Dinse connectors.16mm² TIG Welding Kit

Sealey Inverter Welder 170Amp 230VCompact lightweight unit suitable for arc welding using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Compatible for generator use. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in tough composite carry-case with 10mm² arc welding accessory kit. IP21 Rated.• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 Rated.
• Model No. MW175• Compact lightweight unit suitable for arc welding using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Compatible for generator use.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in tough composite carry-case with 10mm² arc welding accessory kit.
• IP21 Rated.170Amp MMA Inverter Welder 230V

Sealey MMA/TIG Inverter Welder 130Amp 230VSuitable for arc welding or for TIG welding (optional) using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm. Also includes thermal cut-out and mains voltage LEDs. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in carry-case with 10mm² arc welding accessory kit (Model No. INVMMA1) and shoulder strap. Also suitable for TIG welding with optional TIG accessory kit.• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 10mm² arc welding accessory kit (Model No. INVMMA1) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.
• Optional TIG Accessory Kit: INVTIG1.
• Model No. MW131• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø3.2mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 10mm² arc welding accessory kit (Model No. INVMMA1) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.130Amp MMA/TIG Inverter Welder 230V

Sealey MMA/TIG Inverter Welder 150Amp 230VSuitable for arc welding or for TIG welding (optional) using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap. Also suitable for TIG welding with optional TIG accessory kit.• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.
• Optional TIG Accessory Kit: INVTIG2.
• Model No. MW151• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.150Amp MMA/TIG Inverter Welder 230V

Sealey MMA/TIG Inverter Welder 150Amp with Surge Protection 230VSuitable for arc welding or for TIG welding (optional) using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Features surge protection, allowing the unit to be powered by a generator. Minimum generator output of 6kW required. Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap. Also suitable for TIG welding with optional TIG accessory kit.• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Features surge protection, allowing the unit to be powered by a generator.
• Minimum generator output of 6kW required.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.
• Optional TIG Accessory Kit: INVTIG2.
• Model No. MW151PLUS• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Features surge protection, allowing the unit to be powered by a generator.
• Minimum generator output of 6kW required.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.150Amp MMA/TIG Inverter Welder with Surge Protection 230V

Sealey MMA/TIG Inverter Welder 180Amp 230VSuitable for arc welding or for TIG welding (optional) using scratch-start method. Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm. Also includes thermal cut-out and mains voltage LEDs. Fitted with Hot-Start system to counter electrode sticking during scratch starting. Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap. Also suitable for TIG welding with optional TIG accessory kit.• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.
• Optional TIG Accessory Kit: INVTIG2.
• Model No. MW181• Suitable for arc welding or for TIG welding (optional) using scratch-start method.
• Automatic Arc-Force circuitry makes the unit suitable for arc welding with a wide variety of rods including rutile, basic and stainless from Ø1.6mm up to Ø4.0mm.
• Also includes thermal cut-out and mains voltage LEDs.
• Fitted with Hot-Start system to counter electrode sticking during scratch starting.
• Supplied in carry-case with 16mm² arc welding accessory kit (Model No. INVMMA2) and shoulder strap.
• Also suitable for TIG welding with optional TIG accessory kit.180Amp MMA/TIG Inverter Welder 230V

Sealey Nozzle Long Pack of 5• Model No. 120/802429• Suitable for use with PP25 & PP35Nozzle Long Pack of 5

Sealey Nozzle Pack of 5• Model No. 120/802092• Suitable for use with PP25PLUSNozzle Pack of 5

Sealey Nozzle Short High Power Pack of 5• Model No. 120/802424• Suitable for use with PL120/1Nozzle Short High Power Pack of 5

Sealey Nozzle Short Low Power Pack of 5• Model No. 120/802423• Suitable for use with PP25 & PP35Nozzle Short Low Power Pack of 5

Sealey Spacer Pack of 5• Model No. 120/802128• Suitable for use with PL120/1Spacer Pack of 5

Sealey TIG Welder Foot Pedal Power Control for TIG160HF, TIG161HFACDCPermits hands-free feathering of power output in use. Supplied with 10mtr cable.• Permits hands-free feathering of power output in use.
• Supplied with 10mtr cable.
• Model No. INV/TIG/5• Permits hands-free feathering of power output in use.
• Supplied with 10mtr cable.TIG Welder Foot Pedal Power Control for TIG160HF, TIG161HFACDC

Sealey TIG Welder Power Control for TIG160HF, TIG161HFACDCControls power output and one other selectable parameter. Supplied with 10mtr cable.• Controls power output and one other selectable parameter.
• Supplied with 10mtr cable.
• Model No. INV/TIG/7• Controls power output and one other selectable parameter.
• Supplied with 10mtr cable.TIG Welder Power Control for TIG160HF, TIG161HFACDC

Sealey TIG/MMA HF AC/DC Inverter Welder 160Amp 230VFan-cooled alternating AC/DC power supply for pulse TIG and MMA welding applications. Lightweight, compact unit with high quality technology, suitable for welding aluminium, magnesium, stainless steel, steel, deoxidised copper, nickel and titanium. TIG cycle includes post gas and current down-slope regulation. Features regulated HF push button arc that prevents having to touch the work piece, keeping the tip in good condition for longer. Includes connector for foot pedal or hand controller for when more control is required.


Optional Arc Accessory Kit: INVMMA2
Optional Foot Pedal: INV/TIG/5
Optional Hand Controller: INV/TIG/7• Fan-cooled alternating AC/DC power supply for pulse TIG and MMA welding applications.
• Lightweight, compact unit with high quality technology, suitable for welding aluminium, magnesium, stainless steel, steel, deoxidised copper, nickel and titanium.
• TIG cycle includes post gas and current down-slope regulation.
• Features regulated HF push button arc that prevents having to touch the work piece, keeping the tip in good condition for longer.
• Includes connector for foot pedal or hand controller for when more control is required.
• Model No. TIG161HFACDC• Fan-cooled alternating AC/DC power supply for pulse TIG and MMA welding applications.
• Lightweight, compact unit with high quality technology, suitable for welding aluminium, magnesium, stainless steel, steel, deoxidised copper, nickel and titanium.
• TIG cycle includes post gas and current down-slope regulation.
• Features regulated HF push button arc that prevents having to touch the work piece, keeping the tip in good condition for longer.
• Includes connector for foot pedal or hand controller for when more control is required.160Amp TIG/MMA HF AC/DC Inverter Welder 230V

Sealey TIG/MMA HF Inverter Welder 160Amp 230VFan-cooled DC power supply for TIG and MMA welding applications. Lightweight, compact unit with high quality technology, suitable for welding stainless steel, steel, deoxidised copper, nickel and titanium. TIG cycle includes current down-slope regulation. Features HF or lift striking. Includes connector for foot pedal or hand controller for when more control is required. Supplied in carry-case with shoulder strap.

Optional Arc Accessory Kit: INVMMA2
Optional Foot Pedal: INV/TIG/5
Optional Hand Controller: INV/TIG/7• Fan-cooled DC power supply for TIG and MMA welding applications.
• Lightweight, compact unit with high quality technology, suitable for welding stainless steel, steel, deoxidised copper, nickel and titanium.
• TIG cycle includes current down-slope regulation.
• Features HF or lift striking.
• Includes connector for foot pedal or hand controller for when more control is required.
• Supplied in carry-case with shoulder strap.
• Model No. TIG160HF• Fan-cooled DC power supply for TIG and MMA welding applications.
• Lightweight, compact unit with high quality technology, suitable for welding stainless steel, steel, deoxidised copper, nickel and titanium.
• TIG cycle includes current down-slope regulation.
• Features HF or lift striking.
• Includes connector for foot pedal or hand controller for when more control is required.
• Supplied in carry-case with shoulder strap.160Amp TIG/MMA HF Inverter Welder 230V

Sealey TIG/MMA Inverter Welder 150Amp 230VLightweight, compact unit uses high quality technology for the perfect weld. Fan-cooled DC power supply for TIG and arc welding applications. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. Features hot start anti-stick touch and lift striking. Supplied in carry-case with shoulder strap.

Optional Arc Accessory Kit: INVMMA1• Lightweight, compact unit uses high quality technology for the perfect weld.
• Fan-cooled DC power supply for TIG and arc welding applications.
• Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
• Features hot start anti-stick touch and lift striking.
• Supplied in carry-case with shoulder strap.
• Optional Arc Accessory Kit: INVMMA1.
• Model No. TIG150T• Lightweight, compact unit uses high quality technology for the perfect weld.
• Fan-cooled DC power supply for TIG and arc welding applications.
• Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
• Features hot start anti-stick touch and lift striking.
• Supplied in carry-case with shoulder strap.150Amp TIG/MMA Inverter Welder 230V

Sealey TIG/MMA Inverter Welder 170Amp 230VLightweight, compact unit uses high quality technology for the perfect weld. Fan-cooled DC power supply for TIG and arc welding applications. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. Features hot start anti-stick touch and lift striking. Supplied in carry-case with shoulder strap.

Optional Arc Accessory Kit: INVMMA2• Lightweight, compact unit uses high quality technology for the perfect weld.
• Fan-cooled DC power supply for TIG and arc welding applications.
• Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
• Features hot start anti-stick touch and lift striking.
• Supplied in carry-case with shoulder strap.
• Optional Arc Accessory Kit: INVMMA2.
• Model No. TIG170T• Lightweight, compact unit uses high quality technology for the perfect weld.
• Fan-cooled DC power supply for TIG and arc welding applications.
• Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
• Features hot start anti-stick touch and lift striking.
• Supplied in carry-case with shoulder strap.170Amp TIG/MMA Inverter Welder 230V

Sealey Torch Safety Cap Pack of 2• Model No. 120.802096• Suitable for use with PP25PLUSTorch Safety Cap Pack of 2

Sealey Torch Safety Cap Pack of 2• Model No. 120/802425• Suitable for use with PP25, PP35Torch Safety Cap Pack of 2