MOT Equipment
• Supplied with 4.9mtr cable to enable the operator to use the tool whilst sitting in the vehicle.
• Features self-test facility to ensure the serviceability of the tool.
• Powered by 12V vehicle supply.
• Also tests the 12V continuous live feed, 12V ignition live feed and the reversing lights - not part of the current MOT test, but useful when diagnosing electrical faults.
• Includes 13 to 7 pin adaptor for testing older wiring systems.
• Model No. TST22• VOSA Approved for use in MOT testing stations on vehicle classes 4, 5 and 7. Quick and simple test of 12V 13-pin Euro-type sockets fitted to the rear of the vehicle.
• Supplied with 4.9mtr cable to enable the operator to use the tool whilst sitting in the vehicle.
• Features self-test facility to ensure the serviceability of the tool.
• Powered by 12V vehicle supply.
• Also tests the 12V continuous live feed, 12V ignition live feed and the reversing lights - not part of the current MOT test, but useful when diagnosing electrical faults.
• Includes 13 to 7 pin adaptor for testing older wiring systems.13-Pin Towing Socket Tester 12V - VOSA Approved
• Simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.
• Model No. VS015• VOSA approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.Brake Pedal Depressor - VOSA Approved
• Suitable for pre-test inspection of bodywork and detection of structural corrosion.
• Model No. H1CAH• Aluminium shaft with composite head.
• Suitable for pre-test inspection of bodywork and detection of structural corrosion.Corrosion Assessment Hammer
• Metal shaft and composite body in accordance with VOSA specification.
• Specially constructed to reduce breakages when dropped.
• Check for the MOT approved markings.
• Model No. H1MOT• The only official design of tool fully approved for MOT use by VOSA in the UK.
• Metal shaft and composite body in accordance with VOSA specification.
• Durable design reduces risk of breakage of joint if dropped.
• Check for the approved markings.Corrosion Assessment Hammer - VOSA Approved
• Hardened and tempered stainless steel gauge.
• Selectable Metric or Imperial read-out.
• Zero reset control for comparative measurement.
• Range: 0-10mm/0-0.4", Accuracy: ±0.01mm/0.0005".
• Includes flat surface plate for accurate zeroing.
• Supplied in storage case.
• Model No. VS0563• Calibrated and VOSA approved for use when MOT testing all classes of vehicle.
• Hardened and tempered stainless steel gauge.
• Metric and Imperial calibration with conversion between the two.
• Zero reset control allows for comparative measurement.
• Includes flat surface plate for accurate zeroing of gauge prior to use.
• Supplied in storage case.Digital Tyre Tread Depth Gauge - VOSA Approved
RE-CALIBRATION SERVICE:
We offer a competitively priced calibration service and recommend the unit is returned to us annually for re-calibration. A test certificate can be issued at this point.
Contact our technical help line for further information on 01284 757505 and
quote Model No. VS0563CAL• Model No. VS0563CAL• Our VS0563 has a VOSA approval which covers the initial calibration of the tool at the factory.
• The unit is supplied in a sealed box.
• Once the seal is broken the calibration cannot be guaranteed.
• We do not supply a certificate of calibration for this initial period.
RE-CALIBRATION SERVICE:
We offer a competitively priced calibration service and recommend the unit is returned to us annually for re-calibration. A test certificate can be issued at this point.
Contact our technical help line for further information on 01284 757505 and
quote Model No. VS0563CALDigital Tyre Tread Depth Gauge Calibration Charge
• Additional length extends suitability of HBS97 for class V, VI and VII applications.
• Model No. HBS97E• Twin extensions to HBS97R rails for headlamp beam setters.
• Additional length extends suitability of HBS97 for class V, VI and VII applications.Extension Rail Set for HBS97 Series 1520mm
• Suitability: Headlamp Beam Setters Model No's HBS97 & HBS971 (with the addition of Wheel Set).
• Overall Length: 700mm.
• Model No.HBS97ES• Rail set only.
• Suitability: Headlamp Beam Setters Model No's HBS97 & HBS971 (with the addition of Wheel Set).
• Overall Length: 700mm.Extension Rail Set for HBS97 Series 700mm
• Fitted with aiming screen used in our VOSA approved units, this beam setter is suitable for pre-MOT inspection and fulfils the legal obligation of the garage or bodyshop to return vehicles to the customer in roadworthy condition.
• Compact design includes shortened mast and view-through aiming device.
• Suitable for all types of cars and light commercial vehicles.
• Model No. HBS2010• Ideal for the garage or bodyshop where space is limited.
• Fitted with aiming screen used in our VOSA approved units, this beam setter is suitable for pre-MOT inspection and fulfils the legal obligation of the garage or bodyshop to return vehicles to the customer in roadworthy condition.
• Compact design includes shortened mast and view-through aiming device.
• Suitable for all types of cars and light commercial vehicles.Headlamp Beam Setter - Compact
• Fixed aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Supplied with instructions and certificate of approval.
• Model No. HBS97• VOSA Approved for use in MOT testing stations.
• Fixed aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Supplied with rails for MOT use.
• Unit also available without rails for bodyshop use (Model No.HBS971).
• Supplied with instructions and certificate of approval.Headlamp Beam Setter with Rails
• Fixed HGV aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of heavy goods vehicles.
• Supplied with rails, instructions and certificate of approval (MOT version).
• Model No. HBS97.HGV• VOSA Approved for use in MOT testing stations for vehicle classes VI & VII.
• Fixed HGV aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of heavy goods vehicles.
• Supplied with rails, instructions and certificate of approval.Headlamp Beam Setter with Rails & HGV Aiming Screen
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Supplied without rails for bodyshop use.
• Unit also available with rails for MOT use (Model No. HBS97).
• Supplied with instructions.
• Model No. HBS971• Fixed aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Supplied without rails for bodyshop use.
• Unit also available with rails for MOT use (Model No. HBS97).
• Supplied with instructions.Headlamp Beam Setter without Rails
• Laser dot indicates if beam setter is in or out of calibration.
• Also suitable for other levelling applications using line or dot functions and features two magnets on base for attaching to ferrous surfaces.
• Model No. AK9999• Approved for use with the VOSA approved HBS97 Headlamp Beam Setter.
• Mini tripod can be placed on bonnet or any surface on the test area.
• Laser dot indicates if beam setter is in or out of calibration.
• Also suitable for other levelling applications using line or dot functions and features two magnets on base for attaching to ferrous surfaces.Mini Laser Level Unit
• Utilises same optical box and aiming screen as fitted to our MOT approved headlamp beam setter.
• Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Fitted with fixed column and rubber wheels.
• Model No. HBS2001• Suitable for pre-MOT inspection in garages and bodyshops.
• Utilises same optical box and aiming screen as fitted to our MOT approved headlamp beam setter.
• Fixed aiming screen.
• Internal analogue LUX meter for accurate light intensity measurement.
• Suitable for all types of cars and light commercial vehicles.
• Fitted with fixed column and rubber wheels.Workshop Headlamp Beam Setter