高流量空气滤清器

独特的 DesignTek 空气过滤器的核心是专门开发的聚氨酯泡沫，它充当过滤介质，比纸质空气过滤器具有更高的性能和使用寿命。PYRAMID VORTEX 设计的外表面面积将吸收大量空气中的灰尘颗粒，同时仍允许空气自由流动。

流动性高，过滤效果优良。

本产品适合：
保时捷 911 3.2 Carrera 08/84 - 08/89

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3603001210

您正在查看的产品与这些编号存在交叉引用关系

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filtration.



Fits:
Porsche 911 (63-83) 2.7L 09/73 - 06/77
Porsche 911 (63-83) 2.7 S Carrera 08/73 - 01/76
Porsche 911 (63-83) 3.0 SC 08/82 -07/83
Porsche 911 (63-83) 3.0 SC Carrera 03/74 - 10/83

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3603001209

您正在查看的产品与这些编号存在交叉引用关系

Replaces heavy steel 930 911 Turbo OEM air box; saves weight and increases cold air flow to the engine, resulting in noticeable power gains.



FEATURES:
• Fits all Porsche 911 Turbo 930 vehicles worldwide (1978-1989). NOTE: Does not fit the 1975-1977 non-intercooled cars.
vIncreases horsepower and torque by 21 whp and 14 ft-lbs
• BMC Filter is the highest quality available, also used by Porsche Motorsports. The lifetime use filter is washable and re-oilable.
• Cleans up engine bay for easier access and maintenance.
• Supports up to 550 horsepower
• Significant weight savings
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.

DISCLAIMER: This product removes the OEM intake filter system from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Air Filter solely intended for track and race cars as it is NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR911TAI

您正在查看的产品与这些编号存在交叉引用关系

BMC Air Filter



This Product Fits:
Porsche 911 Carrera 2.7L / 3.0L 1973-83 (K-JETRONIC)


Panel Filter Size:
- width - 178 mm
- height - 401 mm

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

BMC Air Filter.



This Product Fits:
Porsche 911 1966-76
Porsche 914 1970-76

Cylindrical Filter Size:
- width - 140mm
- height - 220mm
- diameter - 90mm


BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

BMC Air Filter.



This Product Fits:
Porsche 911 2.7L / 3.0L / SC 1974-83

Panel Filter Size:
- width - 180mm
- height - 396mm


BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

BMC 空气过滤器。



本产品适合：
保时捷 911 3.2L 1984-89

面板过滤器尺寸：
宽度233毫米
高度234毫米


BMC 空气过滤器的设计和生产确保比原始纸质过滤器更高的空气流量。例如，在 F1 中，BMC 棉质过滤器最大限度地减少了通过空气过滤器的气流压力损失；这样可以确保充分利用最大功率的最佳条件。因此，使用与 F1 空气过滤器相同的技术和材料生产的 BMC 棉质空气过滤器替换原始纸质过滤器的好处是显而易见的。
设计和材料
合格的工程师使用先进的软件，专业技术人员使用最新技术生产 BMC 空气过滤器。F1 过滤器必须非常轻，必须由最好的原材料制成，并且必须提高性能。为此，我们只使用带环氧涂层的合金网，以确保免受汽油烟雾和空气湿度氧化的影响。过滤材料由浸有低粘度油的特殊棉纱布制成，可为您提供最佳的透气性。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FB286

您正在查看的产品与这些编号存在交叉引用关系

BMC Air Filter



This Product Fits:
Porsche 911 3.3L Turbo 1977-89
Porsche 964 3.3L Turbo >>1993

Panel Filter Size:
- width - 210mm
- height - 344mm


BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FB437

您正在查看的产品与这些编号存在交叉引用关系

高性能铝坯空气箱更换盖与工厂空气过滤器或任何售后空气过滤器配合使用，以增加发动机的空气流量，从而增强 Flat-Six 跑车的声音并显着提高动力。



声音：

保时捷工厂早期的 911 进气管旨在消除发动机的进气噪音，让发动机始终保持安静。Fabspeed Motorsport Champgane 彩色 CNC 铝坯高性能开放式风箱盖让所有出色的风冷六缸发动机真正呼吸，让您在 10 分钟内听到更出色的六缸发动机音乐和进气轰鸣声。

特征：

•适合所有早期型号的保时捷 911 Carreras（1963-1973） ，配有塑料空气箱集气室。只需拆除 OEM 翼形螺母和/或紧固件，即可拆除旧的“收缩进气管”，然后重新安装 CNC 铝坯 Fabspeed CUP 进气管，重复使用保时捷硬件。

•超级简单的终极进气升级，适用于所有早期的 911 汽车。
• 显著提高了动力和油门响应，并简化了高科技发动机的外观。
•保证更具跑车声音。
•香槟色阳极氧化铝坯艺术品，表面刻有 911 RS。
•美丽而优雅，令人惊叹。就像是 911 的珠宝。
•计算机辅助设计、CAD，然后由铝坯材料进行 CNC 加工，然后进行香槟阳极氧化，以匹配所有 911 工厂的金镀镉硬件。
•直接替换早期的保时捷 911 OEM 进气管 - 非常受限且复杂。
•所有早期的 911 发动机都希望呼吸顺畅 - Fabspeed CUP 进气盖 100% 可以满足这一要求。
•安装简单，DIY，自己动手，并且可以轻松逆转以用于竞赛目的。
•所有 Fabspeed 性能产品均享受 Fabspeed 终身保修

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR911ABX27

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed CUP 高性能空气箱盖。



直接螺栓固定替换原厂空气箱，提供更大的气流和动力。由阳极氧化金色 T6061 铝合金制成。金色模仿了保时捷当时在其所有风冷汽车中使用的黄色镀锌 OEM 硬件。

这款空气箱盖的设计灵感来自工厂保时捷杯赛车。Fabspeed 的车主在他的 993 RSR 上进行了大量赛道测试后，他发现使用这种开放式过滤器设计可以获得最佳的功率效果，流量更大，进气温度更低。

声音：

工厂生产的 Carrera 空气箱旨在消除发动机的进气噪音，使其无法进入车舱。这款空气箱可让所有出色的风冷水平对置六缸进气噪音进入车舱。

力量：

仅通过这一修改，我们就看到了由于气流增加而比库存增加了 6whp。

特征：

•适合所有最新款保时捷 911 Carrera 3.2L 车辆（1984-1989 年）
• CNC'd T6061 铝结构
• 阳极氧化金与发动机舱内的镀锌硬件相匹配
• 增加 6 whp 并提高油门响应
• 直接更换 OEM 前盖，通过开放式进气系统改善进气效果
• 与 BMC 空气过滤器升级兼容
• 简单的 5 分钟 DIY 安装，无需切割
• 所有 Fabspeed 性能产品均享受 Fabspeed 终身保修


请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR911ABX32

您正在查看的产品与这些编号存在交叉引用关系

Replacement air filter for 5611702



Fits:
Porsche 911 1965-89


Product Specifications:
Part Number: E-3671
Product Style: Oval Air Filter
Air Filter Shape: Oval
Height: 3.25 in (83 mm)
Inner Wire: No
Inside Length: 10.75 in (273 mm)
Inside Width: 4 in (102 mm)
Outside Length: 12 in (305 mm)
Outside Width: 5.25 in (133 mm)
Top Style: Open
Top Material/Finish: None
Filter Material: Cotton Gauze


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E-3671

您正在查看的产品与这些编号存在交叉引用关系

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 2.7L 1972-79 (Panel Filter)
Porsche 911 3.0L / SC 1974-83


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

33-2004

您正在查看的产品与这些编号存在交叉引用关系

K&N 高性能替换空气过滤器。



本产品适合：
保时捷 911 3.2L 1984-89


K&N® 可清洗、可重复使用的高流量空气过滤器™ 具有最先进的分层油棉介质设计，旨在改善气流和捕获污染物，并旨在提高马力。

每个高性能空气过滤器均可重复使用，使用寿命可延长至您车辆的整个使用寿命，并享有 K&N 的 10 年/百万英里有限保修。

K&N 插入式替换过滤器设计用于轻松安装到您的工厂空气箱中。

与原始设备制造商车辆电子设备合作。

环保型 K&N 可重复使用空气过滤器

立即升级并开始享受 K&N 最受欢迎产品的卓越气流和卓越性能！

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

33-2076

您正在查看的产品与这些编号存在交叉引用关系

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.2L 1977-90
Porsche 965 Turbo 3.3L 1990-93
Porsche 965 Turbo 3.6L 1993


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

33-2530

您正在查看的产品与这些编号存在交叉引用关系

K&N Custom Air Filters for Single or Two Barrel Carburetors for Porsche 911 Sold as single unit



This Product Fits:
Porsche 911 with carbs

K&N brand air filter, part number 56-1240 which is now 56-1770-1 this is for Weber 40/46 IDA (Triple carb) as fitted to Porsche 911.

K&N Custom Air Filter kits are designed to allow the maximum performance from your carburettors, yet keep the dirt on the outside where it belongs. These assemblies come with top and base plates and the famous K&N High-Flow Washable Air Filter.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

56-1770-2

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed CUP High Performance Airbox Cover.
Replacement for air box cover 93011018400



This air box works with stock OEM air box simply remove the air box cover replace it with the Maxflow cover. Also purchase 911 K&N air filter (gives Hi performance and deep sound).

High performance cover lid works with factory airbox to increase cold air flow and improve power;

FEATURES:
• Fits: all Porsche 911 Carrera 2.7L / 3.0L vehicles (1974-1983)
• Constructed from Carbon Fiber reinforced plastic with stainless steel quick release clips.
• Includes two large openings of 5.4" x 5.4" for maximum airflow.
• Rain-resistant design
• Simple and easy 5 minute DIY installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.

*Air Filter Not Included

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR911ABX30

您正在查看的产品与这些编号存在交叉引用关系

适合
保时捷 911 - 带定制 ITG 赛车设置的风冷发动机

套件包括

请参阅PMO 与 OE 碳水化合物概述

Pop off air valve.



Fits:
Porsche 911 1973-89

Prevents costly airbox explosions, installed with the engine and air box in place. 911 engines since 1973 have had the bad habit of backfiring and blowing a hole an the air box. 911 POP VALVE is installed inside the air box and when a backfire occurs the valve will instantly open and release the backfire pressure. The POP VALVE then automatically closes and the angine continues to run. The POP VALVE has no effect on the performance or fuel mileage.

CIS Pop Off Valve Installation Click Here

For Fitting Instructions CLICK HERE

Please note the glue is not included with the air valve.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911901522

您正在查看的产品与这些编号存在交叉引用关系