运动弹簧
#小时#
适用于配备空气悬架 (ETS) 的汽车
降低汽车高度: 35mm
适合:
保时捷 Macan Typ 95B 2014>>
仅适用于配备空气悬架 (ETS) 的汽车
注意:请在订购时注明底盘号。
保时捷 Carrera GT、996 GT II 和 GT III 等超高性能汽车都配备了 H&R 弹簧,而梅赛德斯·奔驰则为其超级跑车 CLK DTM AMG 选择了 H&R 弹簧,该超级跑车直接源自 DTM CLK。高强度钢的使用以及根据 DIN EN ISO 9001 要求的完整认证可在最高质量的情况下实现巨大的灵活性。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28804-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only with PASM, only for cars with steel suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28788-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only without PASM, only for cars with steel suspension
Porsche Macan / Macan S / Macan Turbo 2019>>
only without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28788-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan Petrol 2.0L 265Bhp
- Porsche Macan T Petrol 2.0L 265Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
Fits
Porsche Macan (95B, 95BN) 04/2014>> with PASM
WITHOUT Air Suspension
Height Adjustable Springs
for original shock absorbers with electronic damping (PASM)
Macan, S, turbo
Approx. Front Lowering - 40mm to 60mm
Approx. Rear Lowering - 30mm to 50mm
Macan, GTS
Approx. Front Lowering - 30mm to 50mm
Approx. Rear Lowering - 15mm to 35mm
H&R height adjustable spring systems combine standard shock absorbers with variable lowering. The electronic adjustment of adaptive shock absorbers
remains unrestricted and allows a choice between a comfortable or sporty suspension setup.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23001-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
Fits:
Porsche 95B Macan Mk1 - 2014 to 2018
Porsche 95B Macan Mk2 - 2019 to 2022
For cars with PASM
KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.
When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.
With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.
KW Height Adjustable Spring Kit
Max Weight - F: - 1325 R: - 1360
Lowering Front(mm) - 40 - 65
Lowering Rear(mm) - 35 - 60
Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)
Product Features:
- Improved steering behaviour and response
- Compatible with OEM dampers
- Adjust ride height even when springs are installed
- Manufactured in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
25371056
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
Fits:
Porsche 95B Macan Mk1 - 2014 to 2018
Porsche 95B Macan Mk2 - 2019 to 2022
KW height adjustable springs kits are a great alternative to conventional springs to give you a more dynamic look and better driving dynamics.
When installing KW height adjustable springs, the steering behaviour and response of the standard dampers becomes more agile and all driver assistance systems plus comfort features of an adaptive series suspension remain with KW's vehicle specific developed spring set up.
With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Porsche 991 turbo allows you to lower the car in the range of 0-35 mm. You will not have any difficulties adjusting the lowering when changing your wheel/tyre combination.
KW Height Adjustable Spring Kit
Max Weight - F: - 785 R: - 955
Lowering Front(mm) - 20 -40
Lowering Rear(mm) - ca. 25
Please Note
Front and rear height-adjustable (front and rear springs with height adjustment, usage only with factory dampers)
Product Features:
- Improved steering behaviour and response
- Compatible with OEM dampers
- Adjust ride height even when springs are installed
- Manufactured in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
25310090
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
Fits:
Porsche 95B.1 Macan S 3.0L - 2014 to 2018
Porsche95B.1 Macan turbo 3.6L - 2014 to 2018
Porsche 95B.1 Macan Diesel S 3.0L - 2014 to 2018
Porsche 95B.2 Macan S 3.0L - 2019 to 2021
Porsche 95B.2 Macan turbo 2.9L - 2019 to 2021
Porsche 95B.3 Macan S 2.9ltr - 2022 Onwards
* Only for cars with PASM (electronic damper control)
Lowers
Front 30mm
Rear 25mm
- Top-Performance Handling
- Lower centre of Gravity - Lowers Vehicle up to 1.5″ (40 mm)
- Progressive spring design
- Excellent ride quality
The Eibach Pro-Kit is the perfect answer for most popular street cars.
It's our legendary spring system that dramatically improves both a vehicle's performance and appearance. Pro-Kit lowers your car's centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking.
When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs.
Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality.
By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E10-72-014-04-22
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
Fits:
Porsche 95B.1 Macan S 3.0L - 2014 to 2018
Porsche 95B.1 Macan turbo 3.6L - 2014 to 2018
Porsche 95B.1 Macan Diesel S 3.0L - 2014 to 2018
Porsche 95B.2 Macan S 3.0L - 2019 to 2021
Porsche 95B.2 Macan turbo 2.9L - 2019 to 2021
Porsche 95B.3 Macan S 2.9ltr - 2022 Onwards
Lowers
Front 30mm
Rear 25mm
- Top-Performance Handling
- Lower centre of Gravity - Lowers Vehicle up to 1.5″ (40 mm)
- Progressive spring design
- Excellent ride quality
The Eibach Pro-Kit is the perfect answer for most popular street cars.
It's our legendary spring system that dramatically improves both a vehicle's performance and appearance. Pro-Kit lowers your car's centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking.
When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs.
Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality.
By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E10-72-014-02-22
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
原装保时捷螺旋弹簧和降低悬架弹簧的技术规格:
螺旋弹簧:
- 增强操控和转弯性能
- 提供更好的控制和响应能力
- 允许根据不同的驾驶偏好进行定制
- 降低悬挂弹簧:
- 降低车辆行驶高度,打造更具运动感的外观
- 改善空气动力学并减少阻力
- 增强稳定性并减少车身侧倾
- 保持或略微改善乘坐舒适度
升级至原装保时捷线圈弹簧或降低悬架弹簧的好处:
改进的性能:螺旋弹簧的可调特性允许进行精确调节,使驾驶员能够优化保时捷的操控特性和性能。
增强的美感:降低的悬挂弹簧提供了光滑而强劲的姿态,增强了保时捷的整体外观。
定制选项:使用螺旋弹簧,驾驶员可以微调保时捷的悬架以适应他们的特定驾驶偏好,无论是日常通勤还是赛道上的激情驾驶。
提高安全性:升级为高质量螺旋弹簧或降低悬架弹簧可以增强稳定性,减少车身侧倾,并改善整体控制,从而带来更安全的驾驶体验。
当考虑购买原装保时捷螺旋弹簧或降低悬架弹簧时,需要牢记以下几个因素:
兼容性:确保所选的弹簧是专门为您的保时捷车型和型号设计的。
质量和真实性:选择原装保时捷零件或值得信赖的售后市场配件,以确保可靠性、耐用性和合适性。
专业安装:建议由具有保时捷悬架系统经验的合格技术人员安装弹簧,以确保正确安装和校准。
Design911 专门经营保时捷零件和配件。我们的专家团队可以帮助您找到适合您的保时捷车型的正确螺旋弹簧或降低悬架弹簧。我们提供多种原装保时捷零件和高品质售后替代品。我们的专业员工可以提供个性化的建议和指导,帮助您做出明智的决定,确保您获得最适合您特定要求的零件。相信 Design911 可以帮助您升级保时捷的悬架系统并提升您的驾驶体验。
- 支撑架
- 防侧翻稳定杆
- 前控制臂
- 前悬挂连接杆
- 变速箱座
- 转向横拉杆
- 前副车架
- 下降连杆
- Bilstein B4 标准替换件
- Bilstein B4(带 PASM 按钮的车辆)
- Bilstein SPORT B6 减震器
- Bilstein SPORT B6(带 PASM 按钮的车辆)
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Koni 运动系列
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- KW 高度可调弹簧
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- Arnott 欧洲空气悬架产品