EBC
In the early 80’s in Europe, EBC commenced developing the world’s first aftermarket range of products. After a successful launch in Europe, EBC expanded into the USA market in the mid-1980s.
Expanding rapidly in the automotive industry, EBC Brakes has become a world leader in sport, high performance and race brake pads and disc/rotors with a massive trademark range of Porsche products.
EBC produces 100% of its brake pad range in its own factories in the UK and USA and a huge proportion of its automotive brake discs are also UK and USA made
Sold as set of 4 pads for one axle.
OE Part number: 91135195002
Pad Size Information: Width: 76,7mm / Height: 70,2mm
Porsche 911 S 2.7L 1974-77 Front
Porsche 911 SC 3.0L 1974-83 Front
Porsche 911S 1969-73 Front
Porsche 911 2.7L CARRERA 1974-77 Front
Porsche 911 (930) TURBO 3.0L 1975-77 Front
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3103C
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
Sold as set of 4 pads for one axle.
Porsche 911 2.0L 64-69 (Front)
Porsche 911 2.2L 69-77 (Front)
Porsche 911 2.4L 71-77 (Front)
Porsche 911 2.7L 72-77 (Front)
Porsche 911 2.8L 72-73 (Front)
Porsche 911 3.0L 73-83 (Front)
Porsche 911 3.2L 84-89 (Front)
Porsche 930 3.0L Turbo 1974-77 (Front)
Ferrari 308 1973-85 (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4103R
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
Sold as set of 4 pads for one axle.
Porsche 930 3.3L 1977-89 (Front & Rear)
Porsche 964 3.6L C2 1991-93 (Front & Rear)
Porsche 964 3.6L C4 1989-93 (Front & Rear)
Porsche 944 2.5L Turbo 1985-88 (Front & Rear)
Porsche 944 2.5L Turbo 1985-88 (Front & Rear)
Porsche 944 3.0L S2 1989-93 (Front & Rear)
Porsche 968 3.0L 1991-95 (Front & Rear)
Porsche 964 3.6L C2 1989-91 (Front)
Porsche 965 3.3L 1990-93 (Rear)
Porsche 965 3.6L 1992-95 (Rear)
Porsche 993 3.6L C2/4 1994-96 (Rear)
Porsche 964 3.6L RS 1991-95 (Rear)
Porsche 928 4.7L 1985-86 (Rear)
Porsche 928 5.0L 1985-92 (Rear)
Porsche 928 5.4L 1992-95 (Rear)
Porsche 944 2.5L Turbo 1988-91 (Rear)
Porsche 968 3.0L CS 1992-95 (Rear)
Ferrari 348 3.4L 1989-94 (Front & Rear)
Ferrari 355 3.5L 1994-99 (Front & Rear)
Ferrari 456 5.5L (Brembo brakes) (Rear)
Ferrari 456 5.5L (ATE brakes) (Rear)
Ferrari 512TR 5.0L 1992-96 (Rear)
Ferrari 550 5.8L 1997-02 (Rear)
Ferrari 575M 5.7L 2002-08 (Rear)
Lamborghini Diablo 5.7L (Brembo) 1990-96 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3612C
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Sold as set of 4 pads for one axle.
Porsche 930 3.3L 1977-89 (Front & Rear)
Porsche 964 3.6L C2 1991-93 (Front & Rear)
Porsche 964 3.6L C4 1989-93 (Front & Rear)
Porsche 944 2.5L Turbo 1985-88 (Front & Rear)
Porsche 944 3.0L S2 1989-93 (Front & Rear)
Porsche 968 3.0L 1991-95 (Front & Rear)
Porsche 964 3.6L C2 1989-91 (Front)
Porsche 964 3.6L RS 1991-95 (Rear)
Porsche 965 3.3L 1990-93 (Rear)
Porsche 965 3.6L 1992-95 (Rear)
Porsche 993 3.6L C2/4 1994-96 (Rear)
Porsche 993 3.6L C2S/C4S 1994-96 (Rear)
Porsche 928 4.7L 1985-86 (Rear)
Porsche 928 5.0L 1985-92 (Rear)
Porsche 928 5.4L 1992-95 (Rear)
Porsche 944 2.5L Turbo 1988-91 (Rear)
Porsche 968 3.0L CS 1992-95 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4612R
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Front)
Porsche 986 Boxster S 3.2L 2000-06 (Front)
Porsche 987 Boxster S 3.2L / 3.4L 2005-08 (Front)*
Porsche 987C Cayman S 3.4L 2005-08 (Front)*
*Original shape to use with old type pin kit and sensors.
Porsche 996 3.6L C4S 2003-05 (Rear)
Porsche 996 3.6L Turbo 2000-04 (Rear)
Porsche 996 3.6L GT2 2001-03 (Rear)
Porsche 996 3.6L GT3 1999-05 (Rear)
Porsche 997 3.8L C2S / C4S 2004-05 (Rear)
Porsche 997 3.8L MKII C2S / C4S (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31514C
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Front)
Porsche 997 C2 3.6L 2004-05 (Front)
Porsche 986 Boxster S 3.2L 2000-06 (Front)
Porsche 987 Boxster S 3.2L / 3.4L 2005-08 (Front)*
Porsche 987C Cayman S 3.4L 2005-08 (Front)*
*Original shape to use with old type pin kit and sensors.
Porsche 996 C4S 3.6L 2003-05 (Rear)
Porsche 996 Turbo 2000-04 (Rear)
Porsche 996 GT2 2000-04 (Rear)
Porsche 996 GT3 2000-04 (Rear)
Porsche 997 3.8L C2S / C4S (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41514R
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
Sold as set of 4 pads for one axle.
Porsche 965 3.3L 1990-93 (Front)
Porsche 964 RS 1990-94 (Front)
Porsche 993 C2/4 1994-98 (Front)
Porsche 928 4.5L 1985-86 (Front)
Porsche 928 5.0L 1985-92 (Front)
Porsche 968 3.0L SPORT 1992-95 (Front)
Porsche 944 Turbo S 2.5L 1988 (Front)
Porsche 944 Turbo 2.5L 1989-91 (Front)
Porsche 993 Turbo 1995-98 (Rear)
Porsche 993 RS 1995-98 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3767C
The product you are viewing cross references to these numbers
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Sold as set of 4 pads for one axle.
Porsche 965 3.3L 1990-93 (Front)
Porsche 964 RS 1990-94 (Front)
Porsche 993 C2/4 1994-98 (Front)
Porsche 993 C2S 1994-98 (Front)
Porsche 993 Turbo 1995-98(Rear)
Porsche 993 RS 1995-98(Rear)
Porsche 928 4.5L 1985-86 (Front)
Porsche 928 5.0L 1985-92 (Front)
Porsche 968 3.0L SPORT 1992-95 (Front)
Porsche 944 2.5L Turbo S 1988 (Front)
Porsche 944 2.5L Turbo 1989-1991 (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4767R
The product you are viewing cross references to these numbers
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Rear)
Porsche 997 C2 / C4 3.6L 2004-08 (Rear)
Porsche 986 Boxster 2.5L / 2.7L 1997-04 (Rear)
Porsche 986 Boxster S 3.2L 2000-06 (Rear)
Porsche 987 Boxster MKI / MKII 3.4L 2006>> (Rear)
Porsche 987C Cayman 3.4L 2005-08 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31208C
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
Sold as set of 4 pads for one axle.
Porsche 996 Carrera 3.4L / 3.6L 1997-04 (Rear)
Porsche 997 C2 / C4 3.6L 2004-08 (Rear)
Porsche 986 Boxster 2.5L / 2.7L 1997-04 (Rear)
Porsche 986 Boxster S 3.2L 2000-06 (Rear)
Porsche 987 Boxster S 3.4L MKI 2006-08 (Rear)
Porsche 987 Boxster S 3.4L MKII 2009>> (Rear)
Porsche 987 Boxster Spyder 3.4L 2010>> (Rear)
Porsche 987C Cayman 2.7L 2005-06 (Rear)
Porsche 987C Cayman S 3.2L 2005-08 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41208R
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
Sold as set of 4 pads for one axle.
Porsche 965 3.6L Turbo 1992-93 (Front)
Porsche 993 3.6L C4S 1996-97 (Front)
Porsche 993 3.6L Turbo 1995-97 (Front)
Porsche 993 Carrera RS 1995-97 (Front)
Porsche 928 5.4L 1992-95 (Front)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 928GTS 5.4L 1992-95
Sold as set of 4 pads for one axle.
Porsche 965 3.6L Turbo (Front)
Porsche 993 3.6L Turbo (Front)
Porsche 993 RS (Front)
Porsche 928 GTS 5.4L (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4997R
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 928GTS 5.4L 1992-95
Sold as set of 4 pads for one axle.
Porsche 996 3.6L C4S 2003-05 (Front)
Porsche 996 3.6L Turbo 2001-05 (Front)
Porsche 996 3.6L GT3 MKI (Front) (Cars with 4 Piston Calipers)
Porsche 997 3.8L C2S 2004-08 MKI (Front)
Porsche 997 3.8L C4S 2004-08 MKI (Front)
Porsche 997 3.8L C4S 2008>> MKII (Front)
Porsche 997 3.8L C2S 2008>> MKII (Front)
Porsche 997 3.8L GTS 2008>> MKII (Front)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31515C
The product you are viewing cross references to these numbers
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Sold as set of 4 pads for one axle.
Porsche 924S 2.5L 1979-85 (Front)
Porsche 924 2.0L Turbo 1979-88 (Front)
Porsche 928 4.5L 1977-79 (Front)
Porsche 944 2.5L 1982-89 (Front)
Porsche 944 2.7L 1987-89 (Front)
Lamborghini Diablo 5.7L (ATE) 1990-96 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3345C
The product you are viewing cross references to these numbers
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3220C
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Rear)
Porsche 928 4.7L 1979-85 (Rear)
Porsche 944 2.5L 1982-89 (Rear)
Porsche 944 2.7L 1987-89 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4220R
The product you are viewing cross references to these numbers
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Sold as set of 4 pads for one axle.
Porsche Boxster 986 2.5L 1997-99 (Front)
Porsche Boxster 986 2.7L 1999-04 (Front)
Porsche Boxster 987 2.7L 2004-09 (Front)
Porsche Cayman 987C 2.7L 2005-09 (Front)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31207C
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
Sold as set of 4 pads for one axle.
Porsche Boxster 986 2.5L 1997-99 (Front)
Porsche Boxster 986 2.7L 1999-04 (Front)
Porsche Boxster 987 2.7L 2004-08 (Front)
Porsche Cayman 987C 2.7L 2005-08 (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41207R
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
Sold as set of 4 pads for one axle.
OE Part No 91135295003 / 91135295004
Pad size: Width 61 mm / Height: 56 mm
Porsche 911T , E 1965-73 (None S) Front or Rear (M caliper - 91135190700/ 91135190800)
Porsche 911 2.7L (none S) 1974-77 Front or Rear
Porsche 914-4 Front
Porsche 914-6 Front
Porsche 911T, E, S 1969-73 Rear
Porsche 911 3.0L SC Rear
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP3104C
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Sold as set of 4 pads for one axle.
Porsche 911 1972-83 (Rear)
Porsche 911 3.2L 1984-89 (Rear)
Porsche 930 3.0L 1974-77 (Rear)
Ferrari 308 3.0L 1973-85 (Rear)
Lamborghini Countach 4.8L 1981-85 (Rear)
Lamborghini Countach 5.2L 1985-89 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4104R
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
Sold as set of 4 pads for one axle.
Porsche 911 S 2.2L 1969-71 (Front)
EBC V4 Greenstuff:
- Fast/Heavy Street Use
- Brake well from cold
- Effective to above 650°C
- Low dust formula
- Generally recommended for cars producing up to 200BHP and / or NOT 4WD
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP2103
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as set of 4 pads for one axle.
Porsche 912 1.6L 1965-70 Front
Porsche 911 2.0L 1964-69 Front
Porsche 911 E 2.2L 1969-71 Front
Porsche 914 1.7L 1969-76 Front
Porsche 914 2.0L 1969-72 Front
Porsche 911 S 2.2L 1969-71 Rear
Porsche 924 turbo 2.0L Lux 1979-85 Rear
Porsche 912 2.0 1975-76 Front & Rear
EBC V4 Greenstuff:
- Fast/Heavy Street Use
- Brake well from cold
- Effective to above 650°C
- Low dust formula
- Generally recommended for cars producing up to 200BHP and / or NOT 4WD
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP2104
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
Sold as set of 4 pads for one axle.
Porsche 928 4.5L 1977-79 (Front)
Porsche 924S 2.5L 1986-88 (Front)
Porsche 944 2.5L 1982-89 (Front)
Porsche 944 2.7L 1987-89 (Front)
Lamborghini Diablo 5.7L (ATE) 1990-96 (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP4345R
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 928 4.5L 1978-82
Sold as set of 4 pads for one axle.
PORSCHE Cayenne 955 3.2L 2004>> (rear)
PORSCHE Cayenne 955 4.5L S 2003>> (rear)
PORSCHE Cayenne 955 4.5L Turbo 2003>> (rear)
PORSCHE Cayenne 957 3.6L 2007>> (rear
PORSCHE Cayenne 957 4.8L S 2007>> (rear)
Audi Q7 4.2L, 3.0L TD, 2006>> Rear
Volkswagen Touareg 3.2L / 3.2L Sport 2003>> (rear)
Volkswagen Touareg 4.2L / 4.2L Sport 2003>> (rear)
Volkswagen Touareg 5.0L TD 2003>> (rear)
Volkswagen Touareg 3.6L 2005>> (rear)
Volkswagen Touareg 3.0L TD / 3.0L TD Sport 2005>> (rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41474R
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
Recommended for high horsepower cars.
Sold as set of 4 pads for one axle.
Porsche 955 Cayenne S 4.5L 2003>> (front)
Porsche 955 Cayenne turbo 4.5L 2003>> (front)
Porsche 957 Cayenne S 4.8L 2007>> (front)
Volkswagen Touareg 3.2L Sport / 4.2L Sport 2003>> Front
Volkswagen Touareg 3.0L TD Sport / 5.0L TD 2005>> Front
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41473R
The product you are viewing cross references to these numbers
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne S/GTS 4.8L 2007>>
Sold as set of 4 pads for one axle.
Porsche Cayenne 955 3.2L 2004>> (front)
Porsche Cayenne 957 3.6L 2007>> (front)
Porsche Cayenne 957 3.0 TD 2008-10 (front)
Volkswagen Touareg 3.2L / 4.2L 2003>> Front
Volkswagen Touareg 3.0L TD 2005>> Front
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41521R
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
Sold as set of 4 pads for one axle.
Porsche 996 3.6L GT2 2001-03 (Front)
Porsche 996 3.6L GT3 2004>> (Front) (Cars with 6 Piston Caliper)
Porsche 997 3.6L GT3 2006>> (Front) (Cars with 6 Piston Caliper)
Porsche 997 3.6L Turbo 2006>> (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41516R
The product you are viewing cross references to these numbers
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
Sold as set of 4 pads for one axle.
PORSCHE 911 (996) 3.6 Twin Turbo GT2 2003-2005 (Cast Iron Disc Only) (Front)
PORSCHE 911 (996) 3.6 GT3 2003-2005 (Cast Iron Disc Only) (Front)
Porsche 997 3.6L TURBO 2006-09 (Front)
Porsche 997 3.6L GT3 2006-09 (Front) (Cars with 6 Piston Calipers)
Ferrari 360 Modena CS (cast iron disc only ) - Front
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31516C
The product you are viewing cross references to these numbers
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
Sold as set of 4 pads for one axle.
Porsche 997 Carrera 3.6L 2006-08 (Front)
Porsche 997 C4 3.6L 2005-07 (Front)
Porsche 987 Boxster S 3.4L 2006-08 (Front)*
Porsche Boxster Spyder 3.4L 2010>> (Front)*
Porsche 987C Cayman S 3.4L 2006>> (Front)*
Porsche 987C Cayman 2.9L 2009>> (Front)
Porsche 987C Cayman R 3.4L (Front)
Porsche 997 Carrera 2S 3.8L 2005-08 (Rear)
Porsche 997 Carrera 4S 3.8L 2005-08 (Rear)
*Will require new shape pin kit and sensors.
95535296000 - Pin kit
99761275600 - Left sensor
99761275900 - Right sensor
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP32029C
The product you are viewing cross references to these numbers
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Sold as set of 4 pads for one axle.
PORSCHE 997.2 3.6L C2 / C4 / 4 Targa 2008-2012 (Cast Iron Disc Only) (Front)
PORSCHE 991 3.4 C2 / C4 / 4 Targa 2011-2015 (Cast Iron Disc Only) (Front)
PORSCHE 981 Boxster 2.7 2012-2016 (Cast Iron Disc Only) (Front)
PORSCHE 981 Boxster S / GTS 3.4 2012-2016 (Cast Iron Disc Only) (Front)
PORSCHE 981 Boxster Spyder 3.8 2015-2016 (Cast Iron Disc Only) (Front)
PORSCHE 982 Boxster (718) 2.0 Turbo 2016>> (Cast Iron Disc Only) (Front)
PORSCHE 981 Cayman 2.7 2012-2016 (Cast Iron Disc Only) (Front)
PORSCHE 981 Cayman 3.4 S 2012-2016 (Cast Iron Disc Only) (Front)
PORSCHE 981 Cayman 3.4 GTS 2014-2016 (Cast Iron Disc Only) (Front)
PORSCHE 982 Cayman (718) 2.0 Turbo 2016>> (Cast Iron Disc Only) (Front)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP32057C
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
Sold as set of 4 pads for one axle.
Porsche 997 TURBO 3.6L 2008>> (Rear)
Porsche 997 MKII C2 / C4 2008>> (Rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
NOTE: Please ring for more details
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP31930C
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
Sold as set of 4 pads for one axle.
Porsche 996 Turbo 2001-05 (Front)
Porsche 996 GT3 2001-03 (Front)
Porsche 997.1 C2S / C4S 3.8L 2004-08 (Front)
Porsche 997.2 C4S 3.8L 2008>> (Front)
Porsche 997.2 C2S 3.8L 2008>> (Front)
Porsche 997.2 GTS 3.8L 2008>> (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41515R
The product you are viewing cross references to these numbers
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
Sold as set of 4 pads for one axle.
Porsche 997 C2S / C4S 3.8L 2005-08 (Rear)
Porsche 997 C2 / C4 3.6L 2005-08 (Front)
Porsche 987 Boxster S 3.4L MKII 2009>> (Front)*
Porsche 987 Boxster Spyder 3.4L 2010>> (Front)*
Porsche 987 Boxster S 3.2L / 3.4L 2005-06 (Front)*
Porsche 987C Cayman 2.9L MKII 2009>> (Front)*
Porsche 987C Cayman S 3.4L 2005-06 (Front)*
*Pin kits and wear sensors on these models (see links below)
- Brake Pad Pin Kit (no. 95535296000) - CLICK HERE
- Brake Pad Sensor (no. 99761275901 / 99761275601) - CLICK HERE
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP42029R
The product you are viewing cross references to these numbers
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Sold as set of 4 pads for one axle.
PORSCHE 997.2 C2 / C4 3.6L 2008-12 (Cast Iron Disc Only) (Front)
PORSCHE 991 3.4 C2 / C4 2011-2015 (Cast Iron Disc Only) (Front)
PORSCHE 981 Boxster 2.7 / 3.4 S / GTS 3.4 2012-2016 (Cast Iron Discs only) (Front)
PORSCHE 981 Boxster Spyder 3.8 2015-2016 (Cast Iron Discs only) (Front)
PORSCHE 982 Boxster (718) 2.0 Turbo 2016>> (Cast Iron Discs only) (Front)
PORSCHE 981C Cayman 2.7 / 3.4 S / GTS 2012-2016 (Cast Iron Discs only) (Front)
PORSCHE 982 Cayman (718) 2.0 Turbo 2016>> (Cast Iron Discs only) (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP42057R
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
Sold as set of 4 pads for one axle.
Porsche 997 GT3 3.6ltr 2006-2010 (Cast Iron Disc Only)
Porsche 997 turbo 3.6ltr 2006-2010 (Cast Iron Disc Only)
Porsche 997.2 C2 / C4 3.6L 2009>> (Cast Iron Disc Only)
Porsche 997.2 GT3 3.8ltr 2009-2012 (Cast Iron Disc Only)
Porsche 997.2 GT3 RS 3.8ltr 450 2009-2012 (Cast Iron Disc Only)
Porsche 997.2 turbo / turbo S 3.8ltr 2009-2013 (Cast Iron Disc Only)
Porsche 997.2 GT3 4.0ltr 2011-2013 (Cast Iron Disc Only)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
NOTE: Please ring for more details
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41930R
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
Sold as set of 4 pads for one axle.
Porsche 987 Boxster 2.7L MKI 2004-08 (Rear)
Porsche 987 Boxster 2.9L MKII 2009>> (Rear)
Porsche 987C Cayman 2.7L MKI 2007-08 (Rear)
Porsche 987C Cayman 2.9L MKII 2009>> (Rear)
Porsche 987C Cayman S 3.4L MKII 2008>> (Rear)
Porsche 987C Cayman R 2009-12 REAR
Porsche 981C Cayman 2.7L / S 3.4L 2014>> REAR
Porsche 982C Cayman (718) 2.0L Turbo (Rear)
Porsche 982C Cayman (718) 2.5L Turbo (Rear)
Porsche 982 Boxster (718) 2.0L Turbo (Rear)
Porsche 982 Boxster (718) 2.5L Turbo (Rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DP41920R
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Sold as set of 4 pads for one axle.
Porsche Cayenne 957 4.8L GTS MKII 2007-10 (front)
Porsche Cayenne 957 4.8L Turbo MKII 2007-10 (front)
Porsche Cayenne 957 4.8L Turbo S MKII 2007-10 (front)
Porsche Cayenne 958 3.0L Supercharged hybrid MKIII 2010>> (front)
Porsche Cayenne 958 3.6L MKIII 2010>> (front)
Porsche Cayenne 958 4.8L MKIII 2010>> (front)
Porsche Cayenne 958 3.0L TD MKIII 2010>> (front)
* For cars without ceramic discs
Porsche Macan 3.0 Twin Turbo 2015>>
Porsche Macan 3.6 Twin Turbo 2014>>
Porsche Macan 3.6 Twin Turbo (Performance Package) 2016>>
* For cars without ceramic discs
Porsche 970 Panamera 4.8L 2009-16 (front)
Porsche 970 Panamera 4.8L Turbo 2009-16 (front)
Porsche 970 Panamera 3.0 Supercharged hybrid 2011>> (front)
Porsche 970 Panamera 3.6L 2010-16 (front)
Porsche 970 Panamera 3.0 TD 2011-16 (front)
* For cars without ceramic discs
PORSCHE 971 Panamera (2nd Gen) 2.9 Twin Turbo 2016>> (Front)
PORSCHE 971 Panamera (2nd Gen) 2.9 Twin Turbo E-Hybrid (PR-1LN) 2016>> (Front)
PORSCHE 971 Panamera (2nd Gen) 3.0 Turbo (PR-1LN) 2016>> (Front)
PORSCHE 971 Panamera (2nd Gen) 4.0 Twin Turbo 2016>> (Front)
PORSCHE 971 Panamera (2nd Gen) 4.0 Twin TD 2016-2017 (Front)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)
- Porsche Panamera 4S Diesel V8 4.0L 4WD (422 Hp)
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD Executive
- Porsche Panamera Turbo V8 4.0L 4WD (550 Hp)
- Porsche Panamera Turbo V8 4.0L 4WD Executive
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Sold as set of 4 pads for one axle.
Porsche 958 Cayenne 3.0L Supercharged hybrid MKIII 2010>> (rear)
Porsche 958 Cayenne 3.6L MKIII 2010>> (rear)
Porsche 958 Cayenne 4.8L MKIII 2010>> (rear)
Porsche 958 Cayenne 4.8L Trubo MKIII 2010>> (rear)
Porsche 958 Cayenne 3.0L TD MKIII 2010>> (rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Sold as set of 4 pads for one axle.
Porsche Cayenne 957 4.8L GTS MKII 2007-10 (rear)
Porsche Cayenne 957 4.8L Turbo MKII 2007-10 (rear)
Porsche Cayenne 957 4.8L Turbo S MKII 2007-10 (rear)
EBC Yellowstuff 3068 compound is new for 2021, it has high friction from cold, not requiring warm-up for street use yet when loaded up and really hot the brakes just get better.
High-efficiency performance pad for high friction and improved stopping power.
Not only a high friction pad but very resistant to heat and lots of heavy braking means that Yellowstuff has been used with great success in fast street cars and Police vehicle brakes alike.
EBC Yellowstuff was upgraded during 2021 to remove copper from the mix to comply with environmental legislations and as the new mix lasts longer it is not now being suggested as a track material due to the longer bedding in process required. On the street, bedding happens naturally in the first 100-200 miles of urban use but for those drivers wishing to arrive at the track with new pads and enjoy their day, our current suggestion is to use the Bluestuff formulation for track day driving both front and rear.
Because of its huge heat range, the applications where EBC Yellowstuff will deliver benefits range from fastest street use on higher horsepower cars on most street-based cars and even as a brake upgrade on Trucks and SUV.
PERFORMANCE
High friction formula improves brake effect by 15%
Fastest street use material, R90 street-legal high-performance pad
✔ Silky smooth and quiet braking on all applications
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Medium hardness material feels good at pedal
✔ If all you need is stopping power, this is the material choice
✔ ECE R 90 type approved for most cars
✔ Features red "brake in' surface coating for instant safe braking after install
In trackday/drift/hillclimb races where earlier Yellow blends were suggested – EBC Bluestuff NDX or the RPX ranges are now the better choices
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
Sold as set of 4 pads for one axle.
This Product Fits:
* For cars without ceramic discs
Porsche Panamera 4.8L 2009>> (rear)
Porsche Panamera 4.8L Turbo 2009>> (rear)
EBC Redstuff Ceramic Brake Pads
As EBC's flagship street brake pad material for prestige and faster cars, EBC Redstuff ceramic Brake pads sets new standards in brake performance.
Product Information
High friction formula improves brake effect 15%.
Redstuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad "Pick up" or disc scoring and reduced dust even further. Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early Redstuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
✔ Redstuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments
✔ EBC lowest dust fast street pad with 15% brake improvement
✔ Capable of repeated heavy brake use without brake "Fall-Off"
✔ Very minimal disc/rotor damage characteristics
✔ Superb material for Prestige imports/European and Asian cars
✔ ECE R 90 type approved for most cars
Features red "brake in' surface coating for instant safe braking after install
Performance
High Performance lowest dust rating pads for Prestige imports and faster street driving.
There are two reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a aramid fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Technical Info:
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction. Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L