FibreTek

Front Lower Spoiler /Splitter 996 GT2
also fits GT2 look front bumper parts No.996 505 311 31GRP or original Porsche GT2 front bumper



Fits:
Porsche 996 GT2

Made out of Fibreglass / Kevlar 

Click picture for large parts diagram.
Diagram Ref: 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9965055553101C

The product you are viewing cross references to these numbers

Grille insert for 996 Duct tail



Fits:
Porsche 996 1998-05 fitted with P996 Ducktail

The vanes were angled to be as non-restrictive as possible to the air path into the engine bay. This means that the engine and air inlet are essentially open when viewed from the front but closed when viewed from the rear, which is good to keep falling leaves out.

The material we chose for the grille was ASA (Acrylonitrile-styrene-acrylate) which prints neatly and can withstand prolonged temperatures of up to 100C. This is more than any engine grille should ever see unless the engine is on fire. In terms of toughness it's on par with ABS but has the added benefit of being UV resistant.

Rear valance for custom exhaust solutions.
Covers both bumper corners and closes the factory outlet.



Fits all 911 SC / Carrera models.

Smooth look interior package (no rear seats).



This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting.

Fits:
for RHD cars (right hand drive)
Porsche 964 1989-94

Smooth look interior package (no rear seats) Porsche 964 LHD

This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting 

Fits LHD cars  (left hand dive)

Porsche 964

Smooth look interior package (no rear seats) 911 1974-89
This is a fibre glass & carbon material interior package, it has 12pcs in the package to give the interior a smooth painted look, this should only be fitted by an expert body shop as some adjustments are required while fitting



Fits:
LHD (left hand dive) or RHD (right hand drive) cars 
Porsche 911 G 1974-89

Front wings with wide body look / RSR Porsche 911 1969-73 can also be used for widebody back dates .

Pair of fibre glass wings with metal head lamp buckets, you will need long wheelbase horn grills and indicator lens. fuel bowl and fuel flap  



Fits:
Porsche 911 1969-73 (Long Wheel Base Cars)

Porsche 911 G models for back dating 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150303223W

The product you are viewing cross references to these numbers

Rear Duck Tail (Ducktail) RS style Porsche 996 (Not Turbo, GT3 or GT2)

O/E fitment Porsche 996 Ducktail Spoiler. Ducktail can be fitted in 10 minutes and subtly transforms the look of you 996.  These come in raw finish and will require priming and painting. Any marks, blemishes or imperfections should be dealt with prior to applying primer and topcoat.

These spoilers weigh approximately 1.8kg more than the original flat deck lid without the Ducktail.

Disclaimer: By completing the purchase of this part, you accept all responsibility for any damage caused during the fitting or finishing process.  

Fits:
Porsche 996 1998-05
Not Turbo, GT3 or GT2

Please note: As most after market panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Bumper Lining. Porsche 965 Turbo / 964 widebody



Fits:
Porsche 965 Turbo 1989-94
Porsche 964 widebody 1989-94

Material:
Fibre Glass

Front bumper lining. 



Fits:
Porsche 965 Turbo 1989-94

Material:
Fibre Glass

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96550511301GRP

The product you are viewing cross references to these numbers

Rear bumper singer look, Wide body.



Fits:
Porsche 964 Turbo

Width of stock 964 Turbo. Bumper measures 172cm (approx) between corner to corner (furthest points away).

Singer-Inspired Design:

Exquisite replication of Singer Porsche aesthetics.

Transforms the appearance of your Porsche 964 Turbo.

Meticulously detailed for an authentic Singer look.

High-Quality Materials:

Crafted from durable and lightweight materials.

Ensures longevity and minimizes added weight.

Resistant to corrosion and environmental factors.

Enhanced Aerodynamics:

Engineered for improved airflow and downforce.

Elevates stability and performance, particularly at higher speeds.

Reduces drag, enhancing overall handling.

Seamless Installation:

Designed for straightforward bolt-on installation.

Compatible with existing Porsche 964 Turbo mounting points.

Requires minimal modifications for a perfect fit.

Upgrading your Porsche 964 Turbo with a Singer-inspired rear bumper offers a fusion of style and performance enhancements. This meticulously crafted bumper faithfully replicates the iconic Singer Porsche design, elevating the visual appeal of your 964 Turbo to Singer levels of sophistication.

Manufactured from high-quality materials, this rear bumper not only exudes elegance but also ensures robustness and durability. It is corrosion-resistant and can withstand various environmental factors, making it a practical and long-lasting choice for Porsche enthusiasts.

Beyond its striking appearance, this rear bumper is engineered for improved aerodynamics. Its design enhances airflow and downforce, resulting in heightened stability and performance, especially at higher speeds. This can significantly elevate your driving experience and confidence on the road or track.

Installation is seamless, thanks to the bolt-on design and compatibility with existing Porsche 964 Turbo mounting points. Minimal modifications are required for a precise fit, making it a convenient choice for those seeking to enhance their Porsche's appearance and performance.

At Design911, we are committed to assisting you in finding the ideal parts for your Porsche. Our extensive range of Porsche 964 Turbo rear bumpers, including Singer-inspired designs, ensures you have a variety of options to choose from. Our knowledgeable team is ready to provide professional advice and guidance, helping you select the perfect rear bumper to transform your Porsche 964 Turbo into a Singer-inspired masterpiece. We are dedicated to enhancing your Porsche experience by seamlessly blending style and performance.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Rear bumper singer look, Standard body.



Fits:
Porsche 964 Carrera 2 / Carrera 4

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Singer look front bumper.



Fits:
Porsche 964 Turbo

Singer-Inspired Design:

Crafted to replicate the iconic Singer Porsche style.

Enhances the aesthetics of your Porsche 964 Turbo.

Precision detailing for an authentic appearance.

High-Quality Materials:

Manufactured from durable and lightweight materials.

Ensures longevity and reduces added weight.

Resistant to corrosion and environmental factors.

Improved Aerodynamics:

Designed for enhanced airflow and downforce.

Enhances stability and performance at higher speeds.

Reduces drag and improves overall handling.

Easy Installation:

Bolt-on design for straightforward installation.

Compatible with existing Porsche 964 Turbo mounting points.

Minimal modifications required for fitment.

Upgrading your Porsche 964 Turbo with a Singer-inspired front bumper offers both aesthetic and performance benefits. This meticulously designed bumper replicates the iconic Singer Porsche look, elevating the visual appeal of your 964 Turbo to a whole new level. Crafted with precision, it captures the essence of Singer's renowned attention to detail.

Constructed from high-quality materials, this front bumper not only looks stunning but also ensures durability and longevity. It's resistant to corrosion and environmental factors, making it a practical choice for Porsche enthusiasts.

Beyond aesthetics, this front bumper is engineered for improved aerodynamics. Its design enhances airflow and downforce, resulting in enhanced stability and performance, especially at higher speeds. This can significantly improve your driving experience and confidence on the road or track.

Installation is hassle-free, thanks to the bolt-on design and compatibility with existing Porsche 964 Turbo mounting points. Minimal modifications are required for fitment, making it a practical choice for those looking to enhance their Porsche's appearance and performance.

At Design911, we are dedicated to helping you find the perfect parts for your Porsche. Our extensive range of Porsche 964 Turbo front bumpers, including Singer-inspired designs, ensures you have options to choose from. Our knowledgeable team is ready to provide professional advice and assistance, guiding you to select the ideal front bumper to transform your Porsche 964 Turbo into a Singer-inspired masterpiece. We are committed to enhancing your Porsche experience, combining style and performance seamlessly.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Roof panel light weight in Carbon Fibre for Porsche 987 Cayman. for cars without sunroof, or to delete the sunroof



Fits:
Porsche 987C Cayman 2005-2008

Lightweight roof panel in Carbon Fibre.
for cars with out sunroof, or to delete the sunroof



Fits:
Porsche 996
Porsche 997

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P996997CFR

The product you are viewing cross references to these numbers

Front Bumper. Turbo / S2 Look

Fits:
Porsche 944

Material:
Fiberglas GRP

Please note this bumper will require preparation and minor adjustments in order to make it fit your car. Professional bodyshop is recommended.

Product Type:
Replica for conversions

Click picture for large parts diagram.
Diagram ref no 1.

Rear Ducktail / New Singer DLS style (grill included).



Fits:
Porsche 911 1974-89

These spoilers are made out of fibreglass and come in a semi-prepared condition, so will need Bodyshop final trial fit and preparation before painting.
The engine cover part is made out of polyester.
The grill is also polyester, but already in a black gel coating.

Rear Ducktail / New Singer DLS style (grill included).



Fits:
Porsche 964

If mounted on a 964, no other modification required, the engine cover part is made out of polyester.
The grill is also polyester, but already in a black gel coating.

This item is a one piece ducktail, the grill is attached to the ducktail and cannot be removed.

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 Turbo

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler. This spoiler will accommodate to re-fit the original C4S Centre reflector.

Material: Fibre Glass



Fits:
Porsche 996 C4S 2001-05 Coupe only
(will not fit 996 Turbo or Standard 996)

Note: Requires 3rd brake light 99763105201 - bought separately

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
WITHOUT hole for 3rd brake light
Material: Fibre Glass



Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Classic Look Duck Tail Rear Spoiler.
Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.



Fits:
Porsche 997 Gen2 Models

More information:
To stop the standard spoiler mechanism light on the dash working you can take the vehicle to your local Porsche centre to have the pop up spoiler function de-coded.

The brake light is NOT included with the duct tail to make it work you can harness part number 99761267071 or modify the existing harness if you already have a 3rd brake light in your spoiler or order part number 99763105201

You do not need to change the bumpers and lights if you just want the duct tail spoiler by it self

This spoiler should be fitted like any other fibre glass material product professional prepared, pre-fitted before painting and then let it dry naturally. Not recommend to bake fibre glass products

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P9972DCTL

The product you are viewing cross references to these numbers

Rear Duck Tail (Ducktail) Spoiler with 3rd brake light hole
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear duck tail (Ducktail) RS spoiler.

Material: Fibre Glass (requires reworking)

Fits:
Porsche 993 1994-98

You will require early 911 grille and fitting kit to fit this spoiler.

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Fits:
Porsche 964 1989-94 (none turbo cars)

You will require early 911 grille and fitting kit to fit this spoiler.
Please CLICK HERE to view the grille.
Please CLICK HERE to view the fitting kit.

911 Ducktail Rear Spoiler / Bürzel



Fits:
Porsche 911 1965-89

You will require early 911 grille and fitting kit to fit this spoiler.

Please CLICK HERE to view the grille.

Please CLICK HERE to view the fitting kit.

Average weight: 5 kilograms

Please note:
Requires the grill - not included in price

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P911DCTL

The product you are viewing cross references to these numbers

Aero look front lower spoilers. 2 Parts Left and Right.
This product replaces the two front undertrays they are quite easy to replace as they just click onto the front carrera bumber.

Material: Fibre glass



Fits:
Porsche 993 C2/C4/RS 1994-97
Will not fit 993 Turbo bumpers

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99350552110GRP

The product you are viewing cross references to these numbers

Classic Look Rear Bumper for Porsche 997 Models

Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.

For 997 C2 and C2s the rear bumper will need modification to fit.

Part included:
1 x Rear Bumper

Fits:
Porsche 997 MKI *
Porsche 997 MKII

*For 997 generation 1 (MK1) model cars you will need 997 Gen2 Rear lamps

You will also need our classic look tial pipes 99750555506.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99750555502GRP

The product you are viewing cross references to these numbers

Classic Look Duck Tail Rear Spoiler.
Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.



Fits:
Porsche 997 MKI Gen1 Models Including Convertible Models

More information:
To stop the standard spoiler mechanism light on the dash working you can take the vehicle to your local Porsche centre to have the pop up spoiler function de-coded.

The brake light is NOT included with the duct tail to make it work you can harness part number 99762267070 or modify the existing harness if you already have a 3rd brake light in your spoiler or order part number 99763105201. The rubber buffers need to be changed to 99651298700 x2.

You do not need to change the bumpers and lights if you just want the duct tail spoiler by it self

This spoiler should be fitted like any other fibre glass material product professional prepared, pre-fitted before painting and then let it dry naturally. Not recommend to bake fibre glass products

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P9971DCTL

The product you are viewing cross references to these numbers

The 997 GT3 look front bumper can be fitted to Porsche Boxster 986 or Porsche Carrera 996 with standard non facelift model headlamps.

Fits:
Porsche Boxster 986
Porsche 996 1997-08/2001

Material:
Made from Fiber Glass. GRP

This is a fibre glass after market products and will require preparation before fitting.

The 997 turbo look front bumper can be fitted to Porsche Boxster 986 or Porsche Carrera 996 with standard non facelift model headlamps.

This front bumper is made to be fitted with Original Porsche 997 Turbo indicators and minor wiring mordifications may be required.

Fits:
Porsche Boxster 986 1997 -04
Porsche 996 1997-08/2001

Material:
Made from Fiber Glass. GRP

This is a fibre glass after market products and will require preparation before fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99750519198GRP

The product you are viewing cross references to these numbers

GT3 MKII Look Front bumper. Made from high grade firbe glass great look for facelift 997 models.



Fits:
Porsche 997 MKII 2010>>

Material:
Fibre Glass

Product Type:
Replica

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

997505191XXGRP

The product you are viewing cross references to these numbers

Lightweight composite roof skin.
Material: Carbon



Fits:
Porsche 911 1967-89
Porsche 964
Porsche 993

Save weight by removing the sheet steel (including sunroof) from your 911's roof, and drastically lower you cars centre of gravity. A solution to removing the sunroof from a track/race car and to gain access for a weld-in roll cage without the need to re-paint or for welding. The carbon skin weighs less than half that of the original sheet steel, and can easily take an additional 20kgs off if removing the sunroof.

The carbon fibre is finished in a high-gloss clear coat, showing off the 2x2 twill carbon fibre weave, (3k, aerospace grade). Vacuum bagged and resin-infused, to ensure zero air bubbles and the lightest possible part.

The fibreglass is finished in a high-gloss black.

Both of these roof skins can be painted if required.

Made-to-order, please allow 2-3 weeks for these to be made and dispatched.

Rear Bumper - LEFT SECTION.
Specially produced for use with 964 twin outlet exhaust system.



Fits:
Porsche 964 1989-94 (not Turbo)

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96450516399

The product you are viewing cross references to these numbers

Fits all models 997 / Boxster 987's (incl Cayman & Cayman S).
Smooth finish bonnet that requires a bonnet badge "sticker" like the RS models 

- Carbo Fibre Outer with Fibreglass Inner Frame - weight 6kg approx

Fits:
Porsche 997 2005>>
Porsche 997 Turbo
Porsche 987 Boxster 2005>>
Porsche 987C Cayman

Material:
Carbon / Carbon with Fibreglass

964 Turbo (965) widebody cars. Replaces front undertrays.



Fits:
Porsche 964 (965) Turbo

Material:
Made from Fibre Glass. GRP

Product Type:
Replica

Front bumper GT2. Same as above but made of fibre glass. This is only the front bumper as no lower lip is included or vents included, you will need to purchase this extra from us.


Fits:
Porsche 996 Turbo / GT2
Porsche 996 08/2001>>

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Replica rear spoiler & boot lid. made to look like 996 GT2 rear spoiler. made from epoxy resin for higher strength. Made with OE hinges so it allows the top wing to tilt.



Fits:
1. Porsche Original 996 Carrera - Coupe
2. Porsche Original 996 C4S - Coupe
3. Porsche Original 996 Turbo - Coupe


Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996512996

The product you are viewing cross references to these numbers