GiroDisc

Brake Disc / Rotor Drilled & Slotted 2-pc REAR




Fits:
This is a 325mm Upgrade with spacers & hardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4

Kit Contains:
Brake Disc 325MM complete with centre bell.

Brake Disc Type: 2-Piece Drilled & Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 Turbo with Ceramic Brakes (PCCB)

Porsche 997 Turbo Without Ceramic
Porsche 997 C2 / C2S / C4S with Ceramic Brakes (PCCB)
Porsche 997.2 C2 with Ceramic Brakes (PCCB)
Porsche 987 Cayman S with Ceramic Brakes (PCCB)
Porsche 991.1 C2S with Ceramic Brakes (PCCB)
Porsche 991 C4S with Ceramic Brakes (PCCB)
Porsche 981 Boxster S with Ceramic Brakes (PCCB)
Porsche 981 Cayman S with Ceramic Brakes (PCCB)
Porsche 718 Boxster S / GTS with Ceramic Brakes (PCCB)
Porsche 718 Cayman S / GTS with Ceramic Brakes (PCCB)
Porsche 991.2 C2S / C4S / GTS
Porsche 992 C2S / C4S


Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Drilled & Slotted 2-pc FRONT and REAR




Fits:
Porsche 997 Turbo with PCCB & CENTRE LOCK
Porsche 991 Turbo
Porsche 981 Cayman GT4 with steel disc
Porsche 718 Cayman GT4 with steel disc

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Drilled & Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 996 C4S 02-05 Front
Porsche 996 GT3 MKI 99-01 Front
Porsche 996 Turbo 02-05 Front
Porsche 997 3.8L C2S/C4S 05-09 Front
Porsche 997 3.8L C2S/C4S 09>> Front

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TS-916-4

The product you are viewing cross references to these numbers

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 986 Boxster S 3.2 99-05 Front
Porsche 987 Boxster S 3.2 05>> Front
Porsche 987C Cayman 06>> Front
Porsche 996 3.4/3.6 97-05 Front
Porsche 997 3.6L C2/C4* 05-09 Front
*Not S 3.8L
Porsche 997 3.6L C2/C4* 09>> Front
*Not S 3.8L


Porsche 996 C4S 02-05 Rear
Porsche 996 GT2 02-05 Rear
Porsche 996 GT3 MKI 99-01 Rear
Porsche 996 GT3 MKII 02-05 Rear
Porsche 996 3.6LTurbo 02-05 Rear
Porsche 997 3.8L C2S/C4S 05-09 Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TS-917-4

The product you are viewing cross references to these numbers

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 996 GT3 MKII 02-05 Front
Porsche 996 GT2 02-05 Front
Porsche 997 Turbo 06>> Front
Porsche 997 GT3 06>> Front
Porsche 997 GT3 RS 06>> Front
Porsche Carrera GT 03>> Front

Porsche Carrera GT 03>> Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TS-991-4

The product you are viewing cross references to these numbers

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 986 Boxster 2.5/2.7 97-05 Rear
Porsche 986 Boxster S 3.2 99-05 Rear
Porsche 987 Boxster 2.7 05>> Rear
Porsche 987 Boxster S 3.2 05>> Rear
Porsche 987C Cayman 06>> Rear
Porsche 996 3.4/3.6 97-05 Rear
Porsche 997 C2/C4 05-09 Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TS-738-4

The product you are viewing cross references to these numbers

Titanium Brake Pad Heat Shields.

This Product Fits:

Porsche 997 Turbo 06>> Rear
Porsche 997 GT3 06>> Rear
Porsche 997 GT3 RS 06>> Rear

The problem of brake fluid boiling is simply traced to heat transferring from the rotors and pads directly into the fluid through the caliper pistons. When brake fluid boils, it releases air that is normally part of the molecular structure of the fluid. This air is compressible of course, and the brake pedal goes to the floor instead of moving the caliper pistons. Production cars tend to suffer from this on track days more as they don't usually have the extensive cooling duct and exotic brake materials as true racing cars. True racing only brake calipers generally come with titanium caliper pistons for one reason. Titanium as a material has low thermal conductivity. This means that it is very bad at transferring heat, which is fantastic if you are trying to keep your fluid cool.

The Girodisc solution to help prevent fluid boiling is to use a thin titanium shim placed between the pad back and the pistons, to keep the braking heat from transferring into the pistons and fluid. Here is a comparison of materials and their relative thermal conductivity ratings:

Titanium 6AL-4V 6.7 W/mk
Steel 52 W/mk
Aluminum 130 W/mk

You can see that Titanium will transfer far less heat than steel and especially aluminum. For cars that are going to see hard or multiple track days, these shims are cheap protection from losing the pedal due to boiling at the wrong time and making the day very expensive.

Water jet cut to exact size, no cutting, grinding, or swearing involved.

Price is per axle (four pieces)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TS-1300-4

The product you are viewing cross references to these numbers

Brake Disc / Rotor Drilled & Slotted 2-pc FRONT




Fits:
Porsche 993 Turbo

Kit Contains:
Brake Disc complete with centre bell.

Brake Disc Type: 2-Piece Drilled & Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 997.1 GT3 with PCCB
Porsche 997.2 GT3 with PCCB
Porsche 997.2 GT2 with PCCB
Porsche 997.2 GT3 without PCCB
Porsche 997.2 GT2 without PCCB

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 993 Turbo

Porsche 993 C4S

Porsche 993 RS

Kit Contains:
Brake Disc complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
This is a 350mm Upgrade with spacers & hardware
Porsche 991 C2S
Porsche 991 C4S
Porsche 981 Boxster Spyder

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT and REAR




Fits:
Porsche 997 Turbo with PCCB & CENTRE LOCK
Porsche 991 Turbo
Porsche 981 Cayman GT4 with steel disc
Porsche 718 Cayman GT4 with steel disc

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 GT3 MK1 and MK2 with PCCB
Porsche 996 GT2 with PCCB
Porsche 996 GT3
Porsche 996 GT2
Porsche 997.1 GT3 without PCCB
Porsche 997.1 GT2 without PCCB



Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
This is a 325mm Upgrade with spacers & hardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4

Kit Contains:
Brake Disc 325MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

These are special order items, as long as the suppliers have current stock, delivery will take 7-10 days – you will receive an order update once the order is placed.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Porsche Cayman S with PCCB
Porsche Cayman R with PCCB
Porsche 996 Mk1 and MK2 GT3 with PCCB
Porsche 996 Turbo / GT2 with PCCB
Porsche 997.1 with PCCB
Porsche 997.1 Turbo / GT3 / GT2
Porsche 997.2 with PCCB
Porsche 991.1 C2S with PCCB
Porsche 991.1 C4S with PCCB
Porsche 991.2 C2S / C4S / GTS with PCCB
Porsche 992 C2S / C4S with PCCB

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion.

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
This is a 340mm Upgrade with spacers & hardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Porsche 987 Cayman S
Porsche 987 Cayman R
Porsche 986/987 Boxster S

Kit Contains:
Brake Disc 340MM complete with centre bell.

Brake Disc Type: 2-Piece Drilled & Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
This is a 325mm Upgrade with spacers & hardware
Porsche 987 Cayman S/R w/o PCCB
Porsche 987 Boxster S w/o PCCB

Kit Contains:
Brake Disc 325MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Porsche 987 Cayman S with PCCB
Porsche 981 Cayman S with PCCB
Porsche 981 Boxster S with PCCB
Porsche 981 Spyder with PCCB
Porsche 982 Boxster GTS 2.5 with PCCB
Porsche 982C Cayman GTS 2.5 with PCCB
Porsche 982 Boxster GTS 4.0 with PCCB
Porsche 982C Cayman GTS 4.0 with PCCB

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
This is a 350mm Upgrade with spacers & hardware
Porsche 997.2 C2 / C4
Porsche 991.1 C2 / C4
Porsche 981 Boxster S
Porsche 981 Cayman S
Porsche 718 Cayman 2.0L
Porsche 718 Boxster 2.0L
Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
This is a 325mm Upgrade with spacers & hardware for the following cars
Porsche 981 Boxster / S
Porsche 981 Cayman / S
Porsche 718 Boxster / S
Porsche 718 Cayman / S

Kit Contains:
Brake Disc 325MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
This is a 340mm Upgrade with spacers & hardware
Porsche 981 Boxster base model
Porsche 981 Cayman base model

Kit Contains:
Brake Disc 340MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Rear rotor: 380mm Direct Replacement
Porsche 981 Cayman GT4 without Ceramic Brake (PCCB)
Porsche 718 Cayman GT4 without Ceramic Brake (PCCB)
Porsche 991 turbo / turbo S without Ceramic Brake (PCCB)
Porsche 992 turbo without Ceramic Brake (PCCB)

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 410mm Direct Replacement – Requires use of OEM Porsche iron rotor pad shape
Porsche 981 Cayman GT4 with Ceramic brake (PCCB)
Porsche 718 Cayman GT4 with Ceramic brake (PCCB)
Porsche 991 with Ceramic brake (PCCB)
Porsche 991.2 with Ceramic brake (PCCB)
Porsche 991 turbo / turbo S with Ceramic brake (PCCB)
Porsche 992 Carrera S / 4S with Ceramic brake (PCCB)
Porsche 992 turbo without Ceramic brake (PCCB) - Use GT3 pad shape

Kit Contains:
Brake Disc 410MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
REAR rotor: 390mm Direct Replacement
Porsche 981 Cayman GT4 with Ceramic brake (PCCB)
Porsche 718 Cayman GT4 with Ceramic brake (PCCB)
Porsche 991 with Ceramic brake (PCCB)
Porsche 991.2 with Ceramic brake (PCCB)

Kit Contains:
Brake Disc 390MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 380mm x 34mm – 2mm wider than original PFC rotors
Porsche 981 Cayman GT4 Clubsport

Kit Contains:
Brake Disc 380mm x 34mm complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Rear rotor: 380mm x 32mm – 4mm wider than original PFC rotors
Porsche 981 Cayman GT4 Clubsport

Kit Contains:
Brake Disc 380mm x 32mm complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 350mm Direct Replacement
Porsche 996 GT3 Cup Car

Kit Contains:
Brake Disc 350 complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Porsche 997 GT3 Cup Car

Kit Contains:
Brake Disc 350 complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 380mm Direct Replacement
Porsche 997 GT3 Cup Car

Kit Contains:
Brake Disc 380 complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc system is a direct replacement for the OE disc on all 997.2 GT3/GT2's, with or without the OEM PCCB rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.

The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 380mm Direct Replacement
Porsche 991 GT3

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Rear rotor: 380mm Direct Replacement
Porsche 991 GT3

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 410mm Direct Replacement – Requires use of OEM Porsche iron rotor pad shape
Porsche 991 GT3 with Ceramic brake (PCCB)

Kit Contains:
Brake Disc 410MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Rear rotor: 390mm Direct Replacement
Porsche 991 GT3 with Ceramic brake (PCCB)

Kit Contains:
Brake Disc 390MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Front rotor: 380mm x 34mm – 2mm wider than original PFC rotors
Porsche 991 GT3 Cup

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc REAR




Fits:
Rear rotor: 380mm x 32mm – 4mm wider than original PFC rotors
Porsche 991 GT3 Cup

Kit Contains:
Brake Disc 380MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Brake Disc / Rotor Slotted 2-pc FRONT.
SET OF 2




Fits:
This is a 350mm Upgrade with spacers & hardware for the following cars
Porsche 718 Boxster S / GTS
Porsche 718 Cayman S / GTS
Porsche 991.2 C2 / C4 / T
Porsche 992 C2 / C4 / T - use S rear pad for full sweep

Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This product is a special order item, allow 5 - 7 working days for delivery.

Sold/priced in pairs.

Replacement brake disc Slotted FRONT




Fits:
Replacement disc only 340mm Upgrade with spacers & hardwarehardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Porsche 987 Cayman S
Porsche 987 Cayman R
Porsche 986/987 Boxster S

Replacement brake disc Slotted REAR




Fits:
Replacement disc only 325mm Upgrade with spacers & hardwarehardware
Porsche 996 C2 / C4
Porsche 997 C2 / C4
Porsche 987 Cayman S
Porsche 987 Cayman R
Porsche 986/987 Boxster S

Replacement brake disc Slotted FRONT




Replacement disc only 350mm Upgrade with spacers & hardware

Porsche 996 C4S
Porsche 996 Turbo
Porsche 997 C2 with Ceramic option
Porsche 997 C2S
Porsche 997 C4S

Porsche 997 Turbo
Porsche 997.2 C2 with Ceramic option
Porsche 987 Cayman S w/PCCB
Porsche 991 C2S w/PCCB
Porsche 991 C4S w/PCCB
Porsche 981 Boxster S w/PCCB
Porsche 981 Cayman S w/PCCB
Porsche 718 Boxster S w/PCCB
Porsche 718 Cayman S w/PCCB