IPD
About IPD
Innovative Pro Design (IPD) was founded in 2004 by Mike "Turbo" Kirakosyan. The IPD Plenums were conceived, developed, tested, proven and manufactured in the heart of the Porsche Tuning capital, Southern California.
The IPD plenums evolved from the age old hot rod philosophy of "never leave good enough alone". The genius behind the IPD Intake Plenums is not only the patented "Y" design but also the geometry of diversion areas, optimization of bore sizes and internal surface area manipulation.
IPD Carbon Intake Plenum High Flow Y Pipe. Porsche 991.1 turbo / turbo S
Code: 91600
Carbon Intake Plenum High Flow Y Pipe.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600
The product you are viewing cross references to these numbers
Fits:
Porsche 991.1 turbo
Porsche 991.1 turbo S
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural pre-preg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600
99111005070
99111005071
99111005072
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£2,080.00
Now £2,038.40
Available from supplier 
IPD Carbon Intake Plenum High Flow Y Pipe. Porsche 991.2 GT2 RS
Code: 91600.GT2
Carbon Intake Plenum High Flow Y Pipe.
Fits
Porsche 991.2 GT2 RS
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural prepreg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.GT2
99111007080
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£2,080.00
Now £2,038.40
Available from supplier
IPD Carbon Intake Plenum High Flow Y Pipe. Porsche 991.2 turbo / turbo S
Code: 91600.2
Carbon Intake Plenum High Flow Y Pipe.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.2
The product you are viewing cross references to these numbers
Fits:
Porsche 991.2 turbo
Porsche 991.2 turbo S
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural prepreg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.2
99111007070
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£2,080.00
Now £2,038.40
Available from supplier
Aluminum intake plenum. Porsche 992.1 Turbo / Turbo S 3.7L
Code: 92274-3.7
Aluminum intake plenum, 74mm IPD Plenum ('20-Current).
Fits:
Porsche 992.1 Turbo / Turbo S 3.7L
The 992 Turbo engine is another modern marvel from Porsche. We were fortunate enough to have unlimited access to a 992 during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all previous IPD Turbo Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to produce substantial net gains across both power bands and is guaranteed to elevate the driving experience of any Turbo.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were pleased with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where we need and enjoy it most. The HP and TQ gains continue to increase and out-perform the factory air distributor as you climb through the revs. Peak gains of 35+ wheel HP and 35+ wheel TQ are achieved above 6000 rpm. The 992 Turbo Plenum delivers very impressive power and torque gains that will raise the performance bar of the already potent Turbo as well as raise the hairs on the back of your neck.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.7
The product you are viewing cross references to these numbers
Fits:
Porsche 992.1 Turbo / Turbo S 3.7L
The 992 Turbo engine is another modern marvel from Porsche. We were fortunate enough to have unlimited access to a 992 during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all previous IPD Turbo Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to produce substantial net gains across both power bands and is guaranteed to elevate the driving experience of any Turbo.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were pleased with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where we need and enjoy it most. The HP and TQ gains continue to increase and out-perform the factory air distributor as you climb through the revs. Peak gains of 35+ wheel HP and 35+ wheel TQ are achieved above 6000 rpm. The 992 Turbo Plenum delivers very impressive power and torque gains that will raise the performance bar of the already potent Turbo as well as raise the hairs on the back of your neck.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.7
92274-3.7
9A211003702
9A211013702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
£830.00
Now £813.40
In stock
Aluminum Intake Plenum High Flow Y Pipe. Porsche 991.2 GT2 RS IPD
Code: 91500.2-GT2
Aluminum Intake Plenum High Flow Y Pipe.
Fits:
Porsche 991 GT2 RS
The new IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2-GT2
The product you are viewing cross references to these numbers
Fits:
Porsche 991 GT2 RS
The new IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2-GT2
91500
91500.2
915002
91500.2-GT2
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£1,163.00
Now £1,139.74
Available from supplier
Aluminum Intake Plenum. Porsche 992.1 Carrera/S/GTS 3.0L
Code: 92274-3.0
Aluminum intake plenum.
Fits:
Porsche 992.1 Carrera / S / GTS 3.0L
The new 992 Carrera engine is another modern marvel from Porsche. Although displacement remains unchanged at 3.0L, there are a plethora of upgrades that elevate this new 9A2 Evo engine head and shoulders above the previous 991.2 model engine. We were fortunate enough to have unlimited access to a 992 Carrera S during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all IPD Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to delivered substantial net performance gains across both power bands and is guaranteed to elevate the driving experience of any Carrera.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were happy with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where it is needed and enjoy most. The HP and TQ gains continuing to grow and out-perform the factory air distributor as you climb through the revs. Peak gains of 30+ wheel HP and 25+ wheel TQ are achieved at 6200 rpm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.0
The product you are viewing cross references to these numbers
Fits:
Porsche 992.1 Carrera / S / GTS 3.0L
The new 992 Carrera engine is another modern marvel from Porsche. Although displacement remains unchanged at 3.0L, there are a plethora of upgrades that elevate this new 9A2 Evo engine head and shoulders above the previous 991.2 model engine. We were fortunate enough to have unlimited access to a 992 Carrera S during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all IPD Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to delivered substantial net performance gains across both power bands and is guaranteed to elevate the driving experience of any Carrera.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were happy with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where it is needed and enjoy most. The HP and TQ gains continuing to grow and out-perform the factory air distributor as you climb through the revs. Peak gains of 30+ wheel HP and 25+ wheel TQ are achieved at 6200 rpm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.0
92274-3.0
0PB128335A
0PB128335C
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
£830.00
Now £813.40
In stock
Aluminum Turbo IPD Plenum. Porsche 991.2 Carrera /S
Code: 91274-3.0
Aluminum Turbo IPD Plenum.
Fits:
Porsche 991.2 Carrera /S / 4S / GTS
The new 991.2 turbocharged Carrera Plenums are now available for new Carrera drivers looking to raise the performance bar of their 3.0L turbo engines. The Carrera Plenum is very similar to the Turbo Plenum with only minor modifications to the hardware package. No official testing has been conducted as of yet but based on past experience and customer feedback we expect power gains to be in the mid 30+ range and torque over 40. Stay tuned for dyno testing coming as soon as we get our hands on a test car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274-3.0
The product you are viewing cross references to these numbers
Fits:
Porsche 991.2 Carrera /S / 4S / GTS
The new 991.2 turbocharged Carrera Plenums are now available for new Carrera drivers looking to raise the performance bar of their 3.0L turbo engines. The Carrera Plenum is very similar to the Turbo Plenum with only minor modifications to the hardware package. No official testing has been conducted as of yet but based on past experience and customer feedback we expect power gains to be in the mid 30+ range and torque over 40. Stay tuned for dyno testing coming as soon as we get our hands on a test car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274-3.0
91274
91274-3.0
9127430
9A211013702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£830.00
Now £813.40
In stock
Aluminum Intake Plenum. Porsche 991.2 Turbo /S IPD Intake Plenum 74mm
Code: 91274.2
IPD Aluminium Intake Plenum. 74mm.
Fits:
Porsche 991.2 Turbo /S
Porsche GT2 RS
IPD took delivery of its 991.2 Turbo S and the R & D started the second it arrived at its new home. The new Turbo doesn't substantially benefit from any one particular upgrade, but the sum of its improvements deliver a superior overall Turbo compared to the already impressive 991.1 Turbo it replaces. Yes, we know the latest Turbo is faster with 20 more horsepower but it's the combination of lightening shifts, razor sharp handling and spiritual connection to the vehicle that elevates the driving experience of the extraordinary new 991.2 Turbo.
Porsche made a number of substantial upgrades with the latest 991.2 Turbo. Engine improvements include revised intake ports, larger injectors, higher volume fuel pump, larger turbo compressor wheels and more efficient intercoolers, but the factory intake system remained relatively unchanged allowing the IPD Plenum and Y-Pipe to fit with only minor modifications.
The 991.2 Turbo Plenum upgrade delivers staggering engine power and torque gains that will raise the performance bar of the already potent supercar as well as the hairs on your neck. Horsepower gains are found throughout the entire power band with the bulk of the gains being realized between the 3500-5000 RPM range. Max power gains of 45+ wheel HP come in at 4300 RPM and hold strong all the way to redline. Torque is even more impressive at 60+ in the midrange with a massive torque gains from 3500-5000 RPM.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274.2
The product you are viewing cross references to these numbers
Fits:
Porsche 991.2 Turbo /S
Porsche GT2 RS
IPD took delivery of its 991.2 Turbo S and the R & D started the second it arrived at its new home. The new Turbo doesn't substantially benefit from any one particular upgrade, but the sum of its improvements deliver a superior overall Turbo compared to the already impressive 991.1 Turbo it replaces. Yes, we know the latest Turbo is faster with 20 more horsepower but it's the combination of lightening shifts, razor sharp handling and spiritual connection to the vehicle that elevates the driving experience of the extraordinary new 991.2 Turbo.
Porsche made a number of substantial upgrades with the latest 991.2 Turbo. Engine improvements include revised intake ports, larger injectors, higher volume fuel pump, larger turbo compressor wheels and more efficient intercoolers, but the factory intake system remained relatively unchanged allowing the IPD Plenum and Y-Pipe to fit with only minor modifications.
The 991.2 Turbo Plenum upgrade delivers staggering engine power and torque gains that will raise the performance bar of the already potent supercar as well as the hairs on your neck. Horsepower gains are found throughout the entire power band with the bulk of the gains being realized between the 3500-5000 RPM range. Max power gains of 45+ wheel HP come in at 4300 RPM and hold strong all the way to redline. Torque is even more impressive at 60+ in the midrange with a massive torque gains from 3500-5000 RPM.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274.2
91274
9A111003702
9A211013702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£830.00
Now £813.40
Available from supplier
Aluminum Intake Plenum High Flow Y Pipe. Porsche 991.2 Turbo /S IPD
Code: 91500.2
Aluminum Intake Plenum High Flow Y Pipe.
Fits:
Porsche 991.2 Turbo /S
The new Turbo IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2
The product you are viewing cross references to these numbers
Fits:
Porsche 991.2 Turbo /S
The new Turbo IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2
91500
91500.2
915002
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£1,162.50
Now £1,139.25
In stock
Aluminum Intake Plenum High Flow Y Pipe Porsche 991 Turbo /S IPD
Code: 91500
TIPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 35+ wheel HP, 40+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "no-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Fits:
Porsche 991 Turbo /S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500
The product you are viewing cross references to these numbers
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "no-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Fits:
Porsche 991 Turbo /S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500
91500
99111005070
99111005071
99111005072
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£1,163.00
Now £1,139.74
In stock
Aluminum Intake Plenum Porsche 991 DFI Carrera IPD
Code: 91482-3.4
IPD Aluminum Intake Plenum.
Porsche 991 Carrera DFI 3.4L
The new 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart in recent years. But like most Carreras, power output is controlled to meet a "performance target" that satisfies the masses and not the dedicated Porsche driving enthusiasts. IPD is here to scratch that proverbial performance itch for those Porsche drivers looking to elevate the already visceral Porsche driving experience to the next level.
The engine in the new 991 remains relatively unchanged from the previous 997.2 Carrera. The 991 Carrera continues to employs the 82mm throttle body just like the Carrera before it. This means there is no "Competition Plenum" available since the 82mm TB is still the largest TB available from Porsche.
Performance gains remain at 14+ horsepower at the wheels. As with most IPD Plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, the IPD Plenums deliver net power gains across the entire rev range.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91482-3.4
91482
9A111002110
9A111002111
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
£813.00
Now £796.74
Stock due
Aluminum Intake Plenum. Porsche 991.1 Turbo /S IPD Intake Plenum 74mm
Code: 91274
The incredible 991 Porsche Turbo received a completely redesigned exterior but the engine remained virtually identical to the previous model 997.2 Turbo. This latest Turbo is the most powerful, revolutionary and capable Porsche Turbo to ever come out of Stuttgart. This latest generation Turbo engine, titled the 9A1, delivers 520 HP (560 HP with the "S") and once again, raises the proverbial performance bar in the sports car world.
The new 991 IPD Turbo Plenum is nearly identical to the previous 997.2 Turbo Plenums. The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 991 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version.
The already explosive power of the 991 Turbo can be further increased with the new 991 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 991 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed.
The 991 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
The 991 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions, which of course IPD recommends only be performed on a closed course circuit. Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Fits:
Porsche 991.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274
The product you are viewing cross references to these numbers
The new 991 IPD Turbo Plenum is nearly identical to the previous 997.2 Turbo Plenums. The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 991 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version.
The already explosive power of the 991 Turbo can be further increased with the new 991 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 991 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed.
The 991 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
The 991 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions, which of course IPD recommends only be performed on a closed course circuit. Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Fits:
Porsche 991.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274
91274
9A111003770
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£830.00
Now £813.40
In stock
Aluminum Intake Plenum. Porsche 981 Boxster/Cayman DFI IPD
Code: 81482
IPD Aluminum Intake Plenum.
Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
The product you are viewing cross references to these numbers
Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
81482
9A111012025
9A111012026
9A111012030
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Prices from: £857.50
Aluminum Intake Plenum. Porsche 991 DFI Carrera/S IPD
Code: 91482-3.8
IPD Aluminum Intake Plenum.
Fits:
Porsche 991 Carrera S DFI 3.8L
Does not fit GTS model or 991.1 Carreras equipped with upgraded X51 engine package.
The new 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart in recent years. But like most Carreras, power output is controlled to meet a "performance target" that satisfies the masses and not the dedicated Porsche driving enthusiasts. IPD is here to scratch that proverbial performance itch for those Porsche drivers looking to elevate the already visceral Porsche driving experience to the next level.
The engine in the new 991 remains relatively unchanged from the previous 997.2 Carrera. The 991 Carrera continues to employs the 82mm throttle body just like the Carrera before it. This means there is no "Competition Plenum" available since the 82mm TB is still the largest TB available from Porsche.
Performance gains remain at 15+ horsepower at the wheels. As with most IPD Plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, the IPD Plenums deliver net power gains across the entire rev range.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91482-3.8
The product you are viewing cross references to these numbers
Fits:
Porsche 991 Carrera S DFI 3.8L
Does not fit GTS model or 991.1 Carreras equipped with upgraded X51 engine package.
The new 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart in recent years. But like most Carreras, power output is controlled to meet a "performance target" that satisfies the masses and not the dedicated Porsche driving enthusiasts. IPD is here to scratch that proverbial performance itch for those Porsche drivers looking to elevate the already visceral Porsche driving experience to the next level.
The engine in the new 991 remains relatively unchanged from the previous 997.2 Carrera. The 991 Carrera continues to employs the 82mm throttle body just like the Carrera before it. This means there is no "Competition Plenum" available since the 82mm TB is still the largest TB available from Porsche.
Performance gains remain at 15+ horsepower at the wheels. As with most IPD Plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, the IPD Plenums deliver net power gains across the entire rev range.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91482-3.8
91482-3.8
9A111002100
9A111002101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
£830.00
Now £813.40
In stock
Aluminum Intake Plenum. Porsche 958 Cayenne Turbo IPD
Code: 58276
The second generation 958 Cayenne Turbo received multiple upgrades across the entire platform, including an increase of 50 horsepower. This already impressive power output can be further increase by simply bolting on the IPD Cayenne Turbo plenum.
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 958 Cayenne Turbo utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 958 Cayenne Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
58276
The product you are viewing cross references to these numbers
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 958 Cayenne Turbo utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 958 Cayenne Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
58276
58276
95511064650
7PP145770
95811064600
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
£663.00
Now £649.74
In stock
Aluminum Intake Plenum Competition 82MM Porsche 996 / 997
Code: 97182
Aluminum Intake Plenum Competition 82MM
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Porsche 997 3.8L S
Porsche 997 3.6L
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.
IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97182
The product you are viewing cross references to these numbers
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Porsche 997 3.8L S
Porsche 997 3.6L
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.
IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97182
97182
99611021553
99711041603
99611011601
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£746.00
Now £731.08
In stock
Aluminum Intake Plenum - Competition. Porsche 987 Cayman/Boxster S 3.4L DFI IPD
Code: 87482
The 987.2 Competition 82mm IPD Plenum requires the additional purchase of the 997 GT3 82mm Throttle Body
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
This Plenum requires the additional purchase of the 99760511601 82mm Throttle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87482
The product you are viewing cross references to these numbers
The IPD 987.2 Boxster "Competition" Plenum was designed to meet the needs of the most demanding Boxster S enthusiasts. The "Competition" Plenums is internally larger and specifically designed to utilized the larger 82mm 997 GT3 throttle body. This new 987.2 Competition Plenum follows in the foot steps of the very successful 987.1 Competition Plenum, which has proven itself to be the absolute single best performance mod that can be installed on any 987.1. The combination of the patented IPD "Y" designed Plenum and Porsche's largest TB yield great performance gains that can be seen and felt throughout the entire power band.
The "Competition" version was designed and developed to work with Boxster S's equipped with high quality high-flow aftermarket cat-back exhausts. The addition of headers and high-flow cats will only further compliment the dramatic increases with intake air flow delivered by the IPD Plenum.
Performance gains take place throughout both horsepower and torque curves but are most realized through the mid-range and well into peak power range. This system develops up to 20+ HP on Boxster already equipped with aftermarket cat-back exhausts. Once installed, the 987.2 Boxster Competition Plenum will truly transform your Porsche Boxster driving experience.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
This Plenum requires the additional purchase of the 99760511601 82mm Throttle Body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87482
87482
9A111002022
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£913.00
Now £894.74
Stock due
Aluminum Intake Plenum High Flow Y Pipe. Porsche 997.2 Turbo IPD
Code: 97501
The revolutionary 997 Turbo IPD "Y" Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos.
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.2 Turbo Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997 Turbo MKII
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97501
The product you are viewing cross references to these numbers
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.2 Turbo Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997 Turbo MKII
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97501
97501
99711064674
99711004672
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 MKII Turbo 2009>>
£830.00
Now £813.40
In stock
Aluminum Intake Plenum 74mm. Porsche 997 Turbo MKII IPD
Code: 97274.2
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274.2
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274.2
97274.2
9A111012074
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 MKII Turbo 2009>>
£830.00
Now £813.40
In stock
Aluminum Intake Plenum. Porsche 970 Panamera Turbo IPD
Code: 70276
The brand new Porsche Panamera, named after the famed Carrera Panamericana race, marks Porsche's re-entry into the "four door saloon" front engine car market. The Panamera Turbo and Cayenne Turbo share many common components, including the intake that funnels into the manifold.
The IPD Panamera Turbo plenum has a revised diversion area and larger openings that further optimizes intake air speed and volume. This more efficient design provides the same great power increases as it does on the Cayenne Turbo, an additional 30+ horsepower and 32+ foot pounds of torque. The Panamera Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Panamera Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Panamera Turbo plenum is how easy they install.
Fits:
Porsche 970 Panamera Turbo
Porsche 970 Panamera Turbo S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
70276
The product you are viewing cross references to these numbers
The IPD Panamera Turbo plenum has a revised diversion area and larger openings that further optimizes intake air speed and volume. This more efficient design provides the same great power increases as it does on the Cayenne Turbo, an additional 30+ horsepower and 32+ foot pounds of torque. The Panamera Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Panamera Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Panamera Turbo plenum is how easy they install.
Fits:
Porsche 970 Panamera Turbo
Porsche 970 Panamera Turbo S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
70276
70276
97011014071
97011015070
7PP145770
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
£663.00
Now £649.74
Available from supplier
Aluminum Intake Plenum. Porsche 955 Cayenne Turbo IPD
Code: 55276
The very successful Cayenne was Porsche's solution for driving enthusiast who needed to carry additional passengers and cargo but didn't want to sacrifice driving excitement.
The IPD plenums provide great bolt on power for all late model Porsche applications but they work exceptionally well with all Porsche Turbos models, and the Cayenne Turbo is no exception.
The IPD Cayenne Turbo plenum has a revised diversion area and larger inlet openings that further optimizes intake air speed and volume. This more efficient design provides substantial power increases of an additional 30+ horsepower and 32+ foot pounds of torque.
The Cayenne Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Cayenne Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Cayenne Turbo plenum is how easy they install.
Fits:
Porsche 955 Cayenne Turbo 2002-06
Porsche 955 Cayenne Turbo S 2002-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
55276
The product you are viewing cross references to these numbers
The IPD plenums provide great bolt on power for all late model Porsche applications but they work exceptionally well with all Porsche Turbos models, and the Cayenne Turbo is no exception.
The IPD Cayenne Turbo plenum has a revised diversion area and larger inlet openings that further optimizes intake air speed and volume. This more efficient design provides substantial power increases of an additional 30+ horsepower and 32+ foot pounds of torque.
The Cayenne Turbo Plenum performance gains are throughout the entire power curve and provide additional power that can be felt in the "seat of your pants".
The factory plastic intakes are also prone to cracking, especially with Cayenne Turbos producing higher boost levels. The IPD Plenum will not crack and will handle the highest of boost levels.
The IPD Plenum utilizes all the factory hardware including the OE 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Cayenne Turbo plenum is how easy they install.
Fits:
Porsche 955 Cayenne Turbo 2002-06
Porsche 955 Cayenne Turbo S 2002-06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
55276
55276
95511004650
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
£663.00
Now £649.74
Available from supplier
Aluminum Intake Plenum. Porsche 957 Cayenne Turbo S IPD
Code: 57282
Aluminum Intake Plenum
Fits:
Porsche 957 Cayenne Turbo S 2009
The new Cayenne Turbo S comes equipped with a larger 82mm throttle body. The IPD Plenum fits this larger throttle body and delivers an additional 30+ horsepower and 32+ foot pounds of torque providing your Cayenne Turbo S with an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve. The Turbo S Plenum has been specially machined to accept the larger factory 82mm throttle body.
The 957 Turbo S utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo S 2009
The new Cayenne Turbo S comes equipped with a larger 82mm throttle body. The IPD Plenum fits this larger throttle body and delivers an additional 30+ horsepower and 32+ foot pounds of torque providing your Cayenne Turbo S with an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve. The Turbo S Plenum has been specially machined to accept the larger factory 82mm throttle body.
The 957 Turbo S utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Product Vehicle Group
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
£746.00
Now £731.08
In stock
Aluminum Intake Plenum. Porsche 957 Cayenne Turbo IPD
Code: 57276
The second generation 957 Cayenne Turbo received multiple upgrades across the entire platform, including an increase of 50 horsepower. This already impressive power output can be further increase by simply bolting on the IPD Cayenne Turbo plenum.
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The new Cayenne Turbo Plenum delivers up to 30 horsepower and 32 foot pounds of torque giving your Cayenne an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 957 Turbo utilizes the factory 76mm throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo 2007-10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57276
The product you are viewing cross references to these numbers
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.
The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.
The new Cayenne Turbo Plenum delivers up to 30 horsepower and 32 foot pounds of torque giving your Cayenne an improved boost in engine power and driving performance.
The superior design of the IPD Cayenne Turbo plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.
The 957 Turbo utilizes the factory 76mm throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.
Fits:
Porsche 957 Cayenne Turbo 2007-10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
57276
57276
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
£663.00
Now £649.74
Available from supplier
Aluminum Intake Plenum Competition Range. Porsche 986 Boxster IPD
Code: 86174
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body inc hose pipe
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
986 Boxster Competition 00-04 Plenum: TBA
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
86174
The product you are viewing cross references to these numbers
The 986 Boxster marked Porsche's return to a purpose built 2 seat roadster since the famed 550 Spyder. This liberating open cockpit platform was instrumental in saving Porsche from financial uncertainty and was Porsche highest volume seller from 1997 to 2003, until the Cayenne entered the Porsche line up.
The perfectly balanced mid engine 986 Boxster was designed to deliver driving excitement on sinuous back country roads while enabling the driver (and passenger) to literally take in the sights, sun and smells of the surrounding environment and listening to the intoxicating mechanical sounds of a flat 6 Boxer engine tones.
The Boxster experience can only be further heightened by adding improved performance. The IPD Plenums provide impressive the power gains throughout the entire power band making for an even more visceral Porsche driving experience.
All 986 Boxster IPD Plenum applications are designed to utilize the larger 74mm Porsche throttle body. The combination of the patented "Y" design of the IPD Plenum combined with a larger TB allow for improved air flow and intake air speed. The IPD Plenum is the absolute single best performance mod you can install on a Porsche Boxster.
IPD offers 2 different 986 Boxster plenum versions, each specifically suited to work with different model years and engine displacements.
Installation of the 986 Boxster IPD Plenums comes with additional hardware and is relatively straight forward although IPD strongly recommend installation be performed by a trained Porsche technician.
The 3.2 liter 986 Boxster S Plenum provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
986 Boxster Competition 00-04 Plenum: TBA
Requires upgrading factory 68mm Thottle Body with 74mm Thottle Body
Fits:
Porsche 986 Boxster S 3.2L 2000-04
Porsche 986 Boxster 2.7L 2000-04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
86174
86174
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
£663.00
Now £649.74
In stock
Aluminum Intake Plenum 74mm. Porsche 987 Boxster S 3.2L IPD
Code: 87174-3.2
Aluminum Intake Plenum 74mm
Fits:
Porsche 987 GEN1 Boxster S 3.2L 2005-06*
*Requires throttle body upgrade from 68mm to 74mm (part no 99760511501)
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and reduced intake air speed.
The Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Boxster enthusiasts. From mild to wild, it all depends on how fast you want the wind in your hair.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Boxster performance and heighten your Porsche driving experience.
Porsche introduced the 987 S Boxster with the 3.2 liter engine from the 986 Boxster S. This Plenum version provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most.
The 74mm Boxster S IPD Plenum and upgraded 74mm (from 68mm) throttle body package is recommended for Boxster S enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The IPD Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm IPD Plenum is the best Boxster S modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174-3.2
87174-3.2
98711005501
98711005502
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
£709.00
Now £694.82
In stock
Aluminum Intake Plenum 74mm. Porsche 987 Cayman/Boxster IPD
Code: 87174
Aluminum Intake Plenum 74mm
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511501
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174
The product you are viewing cross references to these numbers
Some early models up to 2006 have a 68mm throttle body so you might need to buy a 74mm throttle body part code 99760511501
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
Porsche 987 GEN1 Cayman 2.7L
Porsche 987 GEN1 Boxster 2.7L
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman/Boxster IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The 74mm Cayman/Boxster S Plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Cayman/Boxster S Plenum application is recommended for Cayman/Boxster S enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 RPM. Power gains are realized throughout the entire power band without any loses in power.
The IPD Cayman/Boxster S Plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman/Boxster driving experience. The 74mm IPD Plenum is the best Cayman/Boxster modification on the market and will further compliment other mods such as exhaust, software and beyond.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
87174
87174
87174-2.7
87174-2.7-05
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Prices from: £694.82
Aluminum Intake Plenum Competition Range. Porsche 987 Cayman/Boxster S 3.4L IPD
Code: 87182
Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Product Vehicle Group
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£746.00
Now £731.08
In stock
Aluminum Intake Plenum. Porsche 987 Cayman/Boxster DFI IPD
Code: 87474
Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power loses.
The all new specifically designed IPD 3.4L DFI Cayman/Boxster Plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the DFI IPD Plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline.
Power output in the lower rev range follows the Porsche factory output, with NO loses. Power and torque are realized in the midrange and continue to climb above factory power outputs all the way up to redline.
Installation of the new IPD 3.4L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 987 GEN2 Cayman S 3.4L DFI
Porsche 987 GEN2 Boxster S 3.4L DFI
Porsche 987 GEN2 Cayman 2.9L DFI
Porsche 987 GEN2 Boxster 2.9L DFI
Product Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£913.00
Now £894.74
Stock due
Aluminum Intake Plenum. Porsche 996 C2/4 3.4L 1998-99 IPD
Code: 96074
Aluminum Intake Plenum. Porsche 996 C2/4 3.4L 1998-99 IPD (FOR EARLY CABLE THROTTLE CARS)
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Porsche introduced all 996 C2's with conventional cable throttles while all C4's were equipped with E-gas throttles. This was for the model year 98 in Europe and 99 in the US.
The IPD "Y" designed Cable plenum is a direct factory replacement of the OE "T" style air distributor. The IPD Plenum provides impressive max horsepower gains of 28 in the mid range and an additional 12 horsepower on top.
The IPD Plenum is the absolute single best modification that can be installed on these early under powered 996 Carreras and will transform your Porsche driving experience.
Installation is relatively easy and straight forward for mechanically inclined DIY customers although IPD strongly recommends having a qualified Porsche technician perform any IPD Plenum installation.
To confirm whether your Porsche is a Cable or E-gas throttle simply look at your throttle body for either a black electronic module (E-Gas) or a conventional spring / cable throttle control.
Fits:
Porsche 996 Carrera 2 3.4L 1998-99
Porsche 996 Carrera 4 3.4L 1998-99
(FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96074
The product you are viewing cross references to these numbers
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Porsche introduced all 996 C2's with conventional cable throttles while all C4's were equipped with E-gas throttles. This was for the model year 98 in Europe and 99 in the US.
The IPD "Y" designed Cable plenum is a direct factory replacement of the OE "T" style air distributor. The IPD Plenum provides impressive max horsepower gains of 28 in the mid range and an additional 12 horsepower on top.
The IPD Plenum is the absolute single best modification that can be installed on these early under powered 996 Carreras and will transform your Porsche driving experience.
Installation is relatively easy and straight forward for mechanically inclined DIY customers although IPD strongly recommends having a qualified Porsche technician perform any IPD Plenum installation.
To confirm whether your Porsche is a Cable or E-gas throttle simply look at your throttle body for either a black electronic module (E-Gas) or a conventional spring / cable throttle control.
Fits:
Porsche 996 Carrera 2 3.4L 1998-99
Porsche 996 Carrera 4 3.4L 1998-99
(FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96074
99611021553
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
£580.00
Now £568.40
In stock
Aluminium Intake Plenum. Porsche 996 / 997
Code: 97174
Aluminum Intake Plenum. Porsche 996 Carrera 3.4L / 3.6L IPD
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Fits:
Porsche 997 GEN1 3.6L
Porsche 997 GEN1 3.8L S
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.
The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.
These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.
The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97174
The product you are viewing cross references to these numbers
Fits:
Porsche Porsche 996 Carrera C2 3.6L
Porsche Porsche 996 Carrera C4 3.6L
Porsche Porsche 996 Carrera C2 3.4L*
Porsche Porsche 996 Carrera C4 3.4L*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Fits:
Porsche 997 GEN1 3.6L
Porsche 997 GEN1 3.8L S
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
Just like the Carrera S, it's difficult to find power for the naturally aspirated 3.4L Carrera, but the IPD Plenum does it better than any other after market mod available. This simple bolt on performance upgrade replaces the factory plastic air distributor with the IPD patented aluminum "Y" style Plenum.
The IPD Plenum delivers impressive horsepower gains of 25 and torque gains of 22 by means of a superior and more efficient design. These gains are mainly felt in the mid range where it is most needed and most enjoyed but performance improvements are realized throughout the entire rev range. Impressive Performance improvements like this will truly transform your Porsche driving experience.
These added power gains in the mid range create a more liner power curve helping to minimizing the dip in power typically experienced in the factory curve resulting in considerable performance improvements.
The 996 Plenum installation is a direct bolt on R & R (remove and reinstall) procedure. Installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97174
97174
99711041603
99611011601
99611011600
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
£663.00
Now £649.74
In stock
Aluminum Intake Plenum. Porsche 996 With Factory X51 Upgrade IPD
Code: 96174-X
The 996 did not mark the beginning of a new Porsche chapter, it marked the beginning of a new Porsche book. The prolific 911 was baptized and emerged water cooled, leaving the legendary air cooled engine to live in Porsche history.
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
The 996 3.6L X51 package was typically found on the "40th Anniversary" limited edition cars (MY 2004) but could also be special ordered by performance minded customers. The X51 engine package increased horsepower from the standard 316 up to 345.
The X51 Carrera's came equipped with a variety performance upgrades, both internally and externally, that made the cars very desirable for Porsche drivers looking for something closer to the GT3 experience.
The X51 engine package was blessed with many wonderful internal performance upgrades but Porsche still utilized the factory air distributor opening the door for the IPD Plenum to provide even more additional power.
The 996 X51 IPD Plenum is designed to use all the pre-existing factory hardware and OE 74mm throttle body. The revolutionary design of the IPD "Y" style Intake Plenum increase horsepower by 24 and torque by 22 (at the wheels).
The X51 Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Fits:
Porsche 996 X51 Upgrade cars 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96174-X
The product you are viewing cross references to these numbers
The total and complete redesign of the 911 engine was fitted with the vintage plastic "T" style air distributor that Porsche has used since the early 911 days. This intake system was found on virtually all 911 Carrera's until the arrival of the DFI cars in 2009.
The unique, innovative and patented design of the IPD Plenum employs a "Y" design that improves performance by channeling air left and right to the cylinder banks more efficiently. This design reduces air flow turbulence and increases air flow velocity resulting in substantial power gains throughout the entire rpm band.
The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums.
The 996 3.6L X51 package was typically found on the "40th Anniversary" limited edition cars (MY 2004) but could also be special ordered by performance minded customers. The X51 engine package increased horsepower from the standard 316 up to 345.
The X51 Carrera's came equipped with a variety performance upgrades, both internally and externally, that made the cars very desirable for Porsche drivers looking for something closer to the GT3 experience.
The X51 engine package was blessed with many wonderful internal performance upgrades but Porsche still utilized the factory air distributor opening the door for the IPD Plenum to provide even more additional power.
The 996 X51 IPD Plenum is designed to use all the pre-existing factory hardware and OE 74mm throttle body. The revolutionary design of the IPD "Y" style Intake Plenum increase horsepower by 24 and torque by 22 (at the wheels).
The X51 Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician.
Fits:
Porsche 996 X51 Upgrade cars 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96174-X
96174-X
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
£663.00
Now £649.74
In stock
Aluminum Intake Plenum Competition Range. Porsche 996 GT3 IPD
Code: 96382
Porsche's launch of the GT3 line marked the return of the purpose built street/track car designed to provide the ultimate Porsche driving experience. The hardcore track focus of the GT3 is reminiscent of the legendary RS line that helped make Porsche famous with driving enthusiasts around the world.
The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.
As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.
The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.
The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).
The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.
Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.
996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body
Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96382
The product you are viewing cross references to these numbers
The GT3 Porsches have their own branch on the Porsche motorsport family tree. GT3 street cars aren't a distant cousin sharing the same family name but are an immediate family member sharing the same DNA with Porsche's top level and most successful race cars. The 996 GT3 is considered by many to be the most performance focused Porsche to ever come out of Stuttgart.
As with all GT3's, power improvements are very difficult to develop because of Porsche's fantastic out-of-the-box design and development on these performance minded machines.
The GT3 engine was specifically developed to deliver power where it's needed on the track, way up high in the rev range. The IPD Plenum compliments that power by delivering additional horsepower throughout the entire power band, especially in the mid range where it's most needed.
The 996 GT3 IPD Plenum provides an additional 24 horsepower at the wheels, enhancing the already ultimate Porsche driving experience. The 996 GT3 Plenum is specifically designed to accommodate the larger 997 GT3 82mm throttle body (additional purchase required).
The combination of the patented Y design plenum and larger throttle body make the 996 GT3 IPD Plenum the ultimate performance upgrade for the ultimate performance Porsche.
Installation of the 996 GT3 IPD Plenum is relatively straight forward but IPD strongly recommends installation be performed by a highly qualified Porsche technician.
996 GT3 Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 76mm Thottle Body with 997 GT3 82mm Thottle Body
Fits:
Porsche 996 GT3 2001 >>
**Not for early year cable driven throttle body cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96382
99611006593
94860511503
94860511504
99611011690
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
£746.00
Now £731.08
Available from supplier
Aluminum Intake Plenum Competition 74mm Throttle Porsche 996 Turbo/S/X50/GT2 IPD
Code: 96274
The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 68 mm TB with 996 Turbo 74 mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96274
The product you are viewing cross references to these numbers
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26. Requires upgrading factory 68 mm TB with 996 Turbo 74 mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96274
96274
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
£730.00
Now £715.40
In stock
Aluminum Intake Plenum 68mm. Porsche 996 Turbo/S/X50/GT2 IPD
Code: 96268
The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 68mm version is designed to function with the factory 68mm throttle body that was O.E. on all 996 factory Turbos. The 68mm Plenum delivers similar power as the larger 74mm competition Plenum.
Horsepower gains range from 30 to 35 above the stock power band and initial boost response is improved. The IPD plenum delivers more power and more torque giving the 996 Turbo a stronger mid range and top end.
The 68mm Plenum version is perfect for the Turbo customer looking to improve engine performance on both stock and moderately modified Turbos developing under 700 horsepower.
The IPD 996 Turbo Plenum will truly transform the already impressive Turbo performance. The Plenum should be the first performance upgrade installed on any Turbo. They deliver great power gains on all Turbos whether they are bone stock or highly modified.
996 Turbo/GT2 Plenum: HP Gains 30-40 / Torque Gains 40-45. To be used with factory 68mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96268
The product you are viewing cross references to these numbers
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 68mm version is designed to function with the factory 68mm throttle body that was O.E. on all 996 factory Turbos. The 68mm Plenum delivers similar power as the larger 74mm competition Plenum.
Horsepower gains range from 30 to 35 above the stock power band and initial boost response is improved. The IPD plenum delivers more power and more torque giving the 996 Turbo a stronger mid range and top end.
The 68mm Plenum version is perfect for the Turbo customer looking to improve engine performance on both stock and moderately modified Turbos developing under 700 horsepower.
The IPD 996 Turbo Plenum will truly transform the already impressive Turbo performance. The Plenum should be the first performance upgrade installed on any Turbo. They deliver great power gains on all Turbos whether they are bone stock or highly modified.
996 Turbo/GT2 Plenum: HP Gains 30-40 / Torque Gains 40-45. To be used with factory 68mm Thottle Body
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96268
96268
99611021571
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
£730.00
Now £715.40
In stock
Aluminum Intake Plenum. Porsche 997 3.6L DFI IPD
Code: 97482-3.6
Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.
The all new specifically designed IPD 3.6L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains for Porsche driving enthusiast.
The superior design of the DFI IPD Plenum provides an additional 14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any power loses down low.
Installation of the new IPD 3.6L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 997 GEN2 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97482-3.6
The product you are viewing cross references to these numbers
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.
The all new specifically designed IPD 3.6L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the OE factory throttle body.
The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains for Porsche driving enthusiast.
The superior design of the DFI IPD Plenum provides an additional 14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any power loses down low.
Installation of the new IPD 3.6L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 997 GEN2 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97482-3.6
9A111012011
9A111012012
9A111012013
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
£813.00
Now £796.74
In stock
Aluminum Intake Plenum. Porsche 997 3.8L DFI IPD
Code: 97482-3.8
Porsche's new DFI (Direct Fuel Injection) intake is a totally and completely redesigned intake system developed to deliver improved performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber.
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.
The all new specifically designed IPD 3.8L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts.
The superior design of the DFI IPD Plenum provides an additional 15 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any loses in power down low.
Installation of the new IPD 3.8L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 997 GEN2 3.8L S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97482-3.8
The product you are viewing cross references to these numbers
The DFI Porsche engine package is a finely tuned performance machine and additional power has proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles but once again IPD developed a design that out performs the factory intake system without compromising reliability and drive-ability.
This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in performance increases without any loses in power.
The all new specifically designed IPD 3.8L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body.
The improved IPD intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts.
The superior design of the DFI IPD Plenum provides an additional 15 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any loses in power down low.
Installation of the new IPD 3.8L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.
Fits:
Porsche 997 GEN2 3.8L S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97482-3.8
9A111002002
9A111002003
9A111002004
9A111002005
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
£830.00
Now £813.40
In stock
Aluminum Intake Plenum High Flow Y Pipe. Porsche 997.1 Turbo IPD
Code: 97500
The revolutionary 997 Turbo IPD "Y" Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos.
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.1 Turbo / GT2 Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97500
The product you are viewing cross references to these numbers
The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.
Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.
The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.
997.1 Turbo / GT2 Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97500
97500
99711064672
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 TURBO 2007>>
- Porsche 997 GT2 2007>>
£830.00
Now £813.40
In stock
Aluminum Intake Plenum Competition Range. Porsche 997.1 Turbo IPD
Code: 97282
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).
The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.
This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97282
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).
The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.
This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97282
97282
99711021570
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 TURBO 2007>>
£830.00
Now £813.40
In stock
Aluminum Intake Plenum 74mm. Porsche 997.1 Turbo IPD
Code: 97274
The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274
The product you are viewing cross references to these numbers
The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.
Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.
The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.
Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.
This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum.
The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.
Fits:
Porsche 997.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97274
97274
99711021570
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 997 TURBO 2007>>
£792.00
Now £776.16
In stock
DISPLAYING 1 to 39 (of 39 products)
