Safety Devices

Roll cage 6 point bolt in for single door bars.
Without sunroof.



MSA/FIA homologated. Certificate 1522 available from MSA

Fits
Porsche 993 - 1994 to 1998
Porsche 993 RS - 1994 to 1997

FIA homologated 6 point bolt-in roll cage for unique single door bars that clear normal trim and dashboard. Mounts to the sill and rear wheel arches and allows use of theinertia reel seat belts.
Designed for a vehicle without a sunroof.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars without sunroof



Not for Competition Use

Fits
Porsche 944 / 944 S / 944 turbo - 1985/2 (oval dash) to 1991
Porsche 968 / 968 Clubsport - 1992 to 1995

6 point bolt-in cage that clears the normal trim and dashboard and front cage mounts to the floor.
Designed for a vehicle without a sunroof.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Universal Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Universal door bar. One required per side. For 45mm tubing
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars with sunroof



Not for Competition Use

Fits
Porsche 944 / 944 S / 944 turbo - 1985/2 (oval dash) to 1991
Porsche 968 / 968 Clubsport - 1992 to 1995

6 point bolt-in cage that clears the normal trim and dashboard.
Front cage is 38mm CDS and rear cage available with different options.
Designed for a vehicle with a sunroof.

Rear roll cage section is available with different options.
For vehicles WITH sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with universal door bars.



MSA/FIA homologated. Certificate 770 available from MSA

Fits
Porsche 914 - 1970 to 1976

CDS 6 point bolt-in cage that clears the normal trim and dashboard.
Certified for competition (with V-brace only) and mounts in five places to the sill and rear cross member

For Universal Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed V-brace (May be used without the front cage)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars with sunroof



Not for Competition Use

Fits
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994
Porsche 964 RS- 1992 to 1993

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. This allows use of inertia reel seatbelts.

Rear roll cage section is available with different options.
For vehicles WITH sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars without sunroof



MSA/FIA homologated. Certificate 1100 available from MSA

Fits
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994
Porsche 964 RS- 1992 to 1993

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. This allows use of inertia reel seatbelts.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars without sunroof. For Full 6 point harness you need to order Front and Rear.



Not for Competition Use

Fits
Porsche 911 - 1974 to 1989
Porsche 912 - 1976

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in for Porsche 911 / 912 targa



MSA/FIA homologated. Certificate 783 available from MSA

Fits
Porsche 911 / 912 targa- 1968 to 1989

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. Uses the single, unique door bars.

Rear roll cage section is available with different options.
For targa models only

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in for cars without sunroof.



MSA/FIA homologated. Certificate 273 available from MSA

Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and front cage
mounts to sills and rear cage mounts to sills and rear wheel arches. Single unique door bars.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with universal door bars.
For cars with sunroof



MSA/FIA homologated. Certificate 761 available from MSA

Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969

6 point bolt-in roll cage for universal door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles with sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Universal Door Bars
• Front cage for twin universal door bars
(Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Universal door bar (1 required per side)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with twin door bars.
For cars with sunroof. For Full 6 point harness you need to order Front and Rear.



Not for Competition Use

Fits
Porsche 996 - 1998 to 2004
Porsche 997- 2004 - 2012

6 point bolt-in roll cage for unique single door bars. Clears all normal trim and dashboard. Mounts to front sills and rear wheel arches.
For vehicles with sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Twin Door Bars
• Front cage for twin door bars
(Must be used with the front and rear cage)
• Rear cage, single fixed diagonal, for twin door bars (May be used without the front cage)
• Rear cage, cross diagonal, harness bar, tunnel brace, for twin door bar (May be used without the front cage)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars with sunroof. For Full 6 point harness you need to order Front and Rear.



Not for Competition Use

Fits
Porsche 996 - 1998 to 2004
Porsche 997- 2004 - 2012

6 point bolt-in roll cage for unique single door bars. Clears all normal trim and dashboard. Mounts to front sills and rear wheel arches.
For vehicles with sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.
For Single Door Bars
• Front roll cage for unique single door bars
(Must be used with the rear roll cage)
• Rear cage, single fixed diagonal, for single door bars (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar, for single door
bars (May be used without the front cage)
• Rear cage, cross diagonal, harness bar, for single door bars (May be used without the front cage)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single diagonal and harness bar.



Not for Competition Use

Fits
Porsche 986 Boxster - 1997 to 1999

6 point bolt-in roll cage for unique single door bars.
Rear roll cage has single fixed diagonal and harness bar.

Build the roll cage to your individual specification using the rear cage and door bar options available below.
• Front roll cage for unique single door bars
(Must be used with the rear roll cage)
• Rear cage, single fixed diagonal, harness bar, without convertible roof brackets.
(May be used without the front cage)
• Rear cage, single fixed diagonal, harness bar, with convertible roof brackets.
(May be used without the front cage)
• Single door bar N/S (left)
(Must be used with the front and rear cage)
• Single door bar O/S (right)
(Must be used with the front and rear cage)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in. Porsche 356C without sunroof



Independently Certified: MSA/FIA homologated

Fits
Porsche 356C - 1963 to 1965
For cars WITHOUT sunroof

6 point bolt-in roll cage for unique single door bars.
The rear roll cage is available with different diagonal bar and harness options to choose from.
This roll cage is designed for cars without a sunroof.

Build the roll cage to your individual specification using the rear cage and door bar options available below.
• Front roll cage section
(Must be used with the rear roll cage)
• Rear cage, single fixed diagonal
(May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar
(May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
(Must be used with the front and rear cage)
• Single door bar O/S (right)
(Must be used with the front and rear cage)

As of July 2020 all roll cage tube is now 44.45mm x 2.64mm.
New specification front cages and door bars cannot be installed to the old specification rear cages.
• Finished roll cage supplied with black powder coat finish