Rear 1/4 Panel

Rear 1/4 window top inner strip.



Fits:
Porsche 911 1969-61 TARGA

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509

The product you are viewing cross references to these numbers

Cover trim B-Pillar panel. Leatherette, Black.



Fits:
Porsche 911 1978-89 TARGA / CABRIO
Porsche 964 1989-94 TARGA / CABRIO
Porsche 993 1995-98 TARGA / CABRIO

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155575

The product you are viewing cross references to these numbers

Rear 1/4 Inner door top strip Vinyl.
Sold as each side



Fits:
Porsche 911 1972-89 COUPE Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155509

The product you are viewing cross references to these numbers

Rear 1/4 Inner door top strips available in vinyl or leather. Sold as pair



Fits:
Porsche 911 1972-89 COUPE Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155509X00

The product you are viewing cross references to these numbers

Rear quarter panel capping in leather. SET OF 2.



Fits:
Porsche 911 1964-68 COUPE LHD and RHD Cars


Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509XXX

The product you are viewing cross references to these numbers

Rear quarter panel capping in vinyl or leather. SET OF 2



Fits:
Porsche 911 1967-68 TARGA LHD and RHD Cars

Pair of Rear quarter panel caps (mouldings) to fit on top of the rear quarter panels for Porsche 911 Targa "Soft Window" SWB models, 1967-1968. Available in vinyl and leather.


Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509X40

The product you are viewing cross references to these numbers

Rear 1/4 window top inner strip for Coupe models. Sold as each side



Fits:
Porsche 911 1969-71 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509

The product you are viewing cross references to these numbers

Rear 1/4 window top inner strip for Coupe models. PAIR



Fits:
Porsche 911 1969-71 COUPE

Pair of Rear quarter panel caps (mouldings) to fit on top of the rear quarter panels for Porsche 911 Coupe LWB models, 1969-1971. Available in vinyl or leather.

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509X51

The product you are viewing cross references to these numbers

Rear 1/4 window top inner strip for Targa models.



Fits:
Porsche 911 1972-89 TARGA

Body from heat resistant ABS. We guarantee a factory authentic appearance and fit.

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155509X40

The product you are viewing cross references to these numbers

Rear quarter panel kit for Porsche 911 Coupe from 1965–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Can be ordered as a retrim kit for you to restore your existing panels or as ready-to-install pieces.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

The retrim kit contains fully trimmed flat panels and material to retrim your existing plastic scoops over the wheel arch. We can also offer the rear quater panels ready-to-install. In this case the flat panels and scoops are fully trimmed and assembled.

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Rear quarter panel kit for Porsche 911 Targa from 1967–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Comes as ready-to-install panels.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete ready-to-install rear quarter panels for Porsche 911 Coupe from 1974–1993.

Available for Coupe models in Porsche Nappa leather or Porsche classic vinyl, with or without pleated sections.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

For coupe models, please note that plastic rear quarter plastic scoop from your old panel needs to be reused when installing your new panels.

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Complete ready-to-install rear quarter panels for Porsche 911 Targa from 1974–1993.

Available forTarga models in Porsche Nappa leather or Porsche classic vinyl, with or without pleated sections.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Rear side panel.



Fits:
Porsche 911 1969-71 Coupé

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507

The product you are viewing cross references to these numbers

Rennline Inner rear 1/4 panel garnish rails carbon fibre. - Coupe only



Fits:
Porsche 911 - 1972 to 1989
Coupe only -  Does not fit Targa or Convertible

Product Description

The garnish rails on your 911 are a high-wear item and typically show their age. Our carbon fiber garnish rails for the 911 will hold up to daily driving abuse or will be a conversation piece in your show car. 

Lighter, stronger and dare we say, better looking than the factory piece this subtle upgrade is quick and only requires your standard set of hand tools to complete.

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Complete carbon fiber replacement for OEM garnish rail
• Installs in place of OEM unit with no adhesive
• OEM fit and finish
• Replaces factory part numbers - 91155509100 / 9115550920

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I138

The product you are viewing cross references to these numbers