Pedals / Floor Boards / Track Mats LHD Cars

Rennline REV2 4 Piece Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 911 / 912 / 930 1965-89 COUPE Manual cars only
Porsche 914 1970-76 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline REV2 4 Piece Pedal Set Rubber Grip.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 (Targa / Cabrio) Manual cars only
Porsche 964 1989-93 Manual cars only
Porsche 993 1994-98 Manual cars only

Rennline pedal covers have been designed to give you ultimate pedal control and comfort. Our dead pedal is the largest available and gives your left foot plenty of surface area to grip when maneuvering through those hard turns. Foot slippage is never a problem with Rennline pedals. Our pedals all have a raised surface treatment that forces superior foot adhesion. Rennline pedal sets are constructed of aircraft grade aluminum and all stainless steel hardware.

•   Pedal covers are available in black and silver
•   Pedal extensions available in red, black or silver

Note: Pictures may not show actual product.

Rennline Aluminium Floor Board. Driver Side.
LHD Cars



Fits:
Porsche 911/912/930 COUPE 1974-89


Note: Pictures may not show actual product.

Rennline Aluminium Floor Board. Driver Side.
LHD Cars



Fits:
Porsche 911/912/930 TARGA / CABRIO 1974-89


Note: Pictures may not show actual product.

Rennline Dead Pedal Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 Targa/Cabrio 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 944 1982-91
Porsche 924 1977-88
Porsche 968 1992-95

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P53

The product you are viewing cross references to these numbers

Rennline Brake Pedal Rubber Grip.
LHD Cars



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 914 1970-76

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P70

The product you are viewing cross references to these numbers

Rennline Aluminium 3 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 914 1970-76

Note: Throttle extensions and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7060

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 COUPE 1965-89

Note: Throttle extensions and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P706051

The product you are viewing cross references to these numbers

Rennline Aluminium 2 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 1965-89 Tiptronic Cars
Porsche 964 1989-94 Tiptronic Cars
Porsche 993 1995-98 Tiptronic Cars

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7062

The product you are viewing cross references to these numbers

Rennline Aluminium 3 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 COUPE 1965-89 Tiptronic Cars

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P706251

The product you are viewing cross references to these numbers

Rennline Aluminium 3 Piece Pedal Set Rubber Grip
LHD Cars



Fits:
Porsche 911/912/930 Targa / Cabrio 1965-89 Tiptronic Cars
Porsche 964 1989-94 Tiptronic Cars
Porsche 964 1995-98 Tiptronic Cars

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P706253

The product you are viewing cross references to these numbers

Rennline Track Mat Set. Driver & Passenger Side.
LHD Cars

Fits:
Porsche 911/912/930 1965-89


Note: Pictures may not show actual product.

Rennline Track Mat. Passenger Side.
LHD Cars

Fits:
Porsche 911/912/930 1965-89


Note: Pictures may not show actual product.

Drivers side aluminium foot rest.
Available in black or clear



Fits
LHD Coupe Cars Only
Porsche 911 / 912 - 1974 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Made from 5 series aluminium for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look
Our foot rests combine the utmost perceived quality for your street outlaw, and the maximum functionality and abuse resistance for your track machine.

Drivers side aluminium foot rest.
Available in black or clear



Fits
LHD targa and Cabriolet Cars Only
Porsche 911 / 912 - 1974 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Made from 5 series aluminium for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look
Our foot rests combine the utmost perceived quality for your street outlaw, and the maximum functionality and abuse resistance for your track machine.

Drivers side aluminium floor board.
Available in black or clear



Fits
Porsche 911 1965 - 1973 LHD Coupe Only

Made from 5 series aluminum for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further
surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-10-

The product you are viewing cross references to these numbers

Drivers side aluminium floor board.
Available in black or clear



Fits
Porsche 911 1974 - 1989 LHD Coupe Only

Made from 5 series aluminum for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further
surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-01-

The product you are viewing cross references to these numbers

Drivers side aluminium floor board.
Available in black or clear



Fits

Porsche 911 1974 - 1989 LHD Targa / Cabriolet Only

Made from 5 series aluminium for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further
surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-02-

The product you are viewing cross references to these numbers

Passenger side aluminium floor board.
Available in black or clear



Fits
LHD Manual Cars Only
Porsche 911 Coupe - 1969 to 1989

Made from 5 series aluminium for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-03-

The product you are viewing cross references to these numbers

Passenger side aluminium floor board.
Available in black or clear



Fits
LHD Manual Cars Only
Porsche 911 Targa 1969 - 1989
Porsche 911 Cabriolet 1982 - 1989

Made from 5 series aluminium for low weight and high strength, these are dimpled by hand in for additional weight reduction and increased stiffness. Further surface treated and anodized for increased wear and corrosion resistance, an exceptionally durable finish, and a killer look

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-FB-04-

The product you are viewing cross references to these numbers

Aluminium pedal set.
Available in black or clear finish



Fits
LHD and RHD Manual Cars Only
Porsche 911 / 912 - 1970 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 - 1998 to 2005
Porsche 997 - 2005 to 2012
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster / Cayman - 2005 to 2012
Porsche 924 / 944 / 968 - 1976 to 1995

CNC machined from 6061 aluminum billet and hard black or clear anodized for increased wear and corrosion resistance, and an exceptionally durable finish. Countersunk holes for installation - including matching black PVD coated Ti6Al4V countersunk bolts and lock nuts for a perfect fit and a killer look.

Perfect complement for our punched floorboards - they combine the utmost perceived quality for your street outlaw, and the maximum functionality and abuse resistance for your track machine.

Balance beam brake pedal assembly - LHD 



Fits:
Porsche 911 - 1965 to 1977

Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976

Note - No bodywork adjustments to the footwell are required to fit the pedal assembly.

We have re-issued this motorsport inspired accessory that has not been available for many years

Left Hand Drive (LHD) only

As fitted to the 911 SC RS by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.

If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs  the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.

The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142305401

The product you are viewing cross references to these numbers

Balance beam brake pedal assembly RSR style - LHD. 

Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976

We have re-issued this motorsport inspired accessory that has not been available for many years

Left Hand Drive (LHD) only

Note: The floor pan must be modified and included in the kit is the reinforcement panel required. 

As fitted to the 2.8 RSR and 3.0 RSR by the Porsche factory, a balance beam brake system works by allowing precise distribution of the braking forces between the front and rear axles by adjusting the brake beam. This allows the maximum braking performance for the vehicle.

If using upgraded (from standard) brake calipers with different piston sizes, different pads or larger brake discs  the braking force to the respective axles can be altered so a balance beam brake system should be used. Brake calipers with increased piston sizes can also lead to a "soft" brake pedal and the balance beam brake system prevents this.

The balance beam systems has two brake master cylinders mounted in parallel on a bracket that allows precise adjustment between the front and rear axles.

If you don't want to make any changes to the bodywork, or originality is not so important to you, use the balance arm brake system of the 911 SC RS (item number 91142305401/1).  

Balance beam brake pedal installation kit. 

Fits:
Porsche 911 - 1965 to 1977
Porsche 911 - 1978 to 1989 if brake booster (servo) is deleted
Porsche 914 - 1970 to 1976
With brake beam brake pedal installation

The set contains the additional parts that are required for installing the balance beam brake system in the vehicle.

Kit Contains:
Brake fluid reservoirs with clamps x 2
Connecting hoses between the reservoir and master brake cylinder with suitable clamps
Connections on the master brake cylinder on the inlet side, 
Adapter to M10x1 thread for the brake light switch
Pressure-switching brake light switch
Distribution piece for the front brake circuit (if necessary, the switch can be installed at this point)
Copper sealing rings x 4 

With the standard pedals, the brake light switch is actuated mechanically by the brake pedal, which is no longer possible with the balance arm brake system. 
This necessitates hydraulic actuation, which is easily integrated into the brake line using a connector and a pressure-triggering brake light switch.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135501313

The product you are viewing cross references to these numbers

Billet aluminum pedal sets for Porsche 911
MANUAL LHD and RHD



The Most Revolutionary Porsche Pedals to ever hit the market are here.

We kept the Top-Tier reputation from our Shifter and Cables alive in our next product adventure. The Numeric Racing Pedals are the most durable and easy to install pedals anywhere on the market. This pedal mounts within minutes on all Porsche 911 Models (1965-1989) with absolutely no drilling or custom modifications required! Sets include Gas Pedal, Clutch and Brake Pedals, all mounting hardware, and an Allen Key installation tool.

These pedals are 100% Aerospace Grade Billet Aluminum for maximum durability with Precision Hex designs for the best grip possible. All Gas Pedals come with ball bearings on the moving axis connected to stainless steel hardware to give the smoothest action of any gas pedal in the world. They are also perfectly shaped to give the driver more surface area to make Heel-Toeing a dream. Our Gas pedals are completely adjustable to give the driver full control over the height of their pedals and where they feel most comfortable.

Our Clutch and Brake Pedals easily mount onto the stock pedal using a universal mounting bracket to secure the pedals to give you a bigger pedal, better looking pedal, and better grip.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM511-

The product you are viewing cross references to these numbers

Competition twin master cylinder pedal box assembly. Porsche 911 - LHD Cars



Fits:
Porsche 911 - 1968 to 1989
LHD Cars Only

Competition pedal box for LHD 911 and 912 from 1968 through to 1989.

Fully reconditioned and modified pedal box comes pre-assembled with twin master cylinders.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911423065

The product you are viewing cross references to these numbers

DesignTek Pedals Alloy and Footrest Kit.
For LHD Cars

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Options:
- For Manual or Tiptronic cars

*Note - The footrest will require modification for
993 models.

Select below please

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360720911

The product you are viewing cross references to these numbers

Rennline Aluminium 2 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 Tiptronic cars
Porsche 964 1989-94 Tiptronic cars
Porsche 993 1995-98 Tiptronic cars


Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P4422

The product you are viewing cross references to these numbers

Rennline Aluminium 3 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 914 1970-76

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P4421

The product you are viewing cross references to these numbers

Rennline Aluminium 3 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 COUPE Tiptronic cars only

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P442211

The product you are viewing cross references to these numbers

Rennline Aluminium 3 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 Targa and Cabrio Tiptronic cars only
Porsche 964 1989-94 Tiptronic cars only
Porsche 993 1995-98 Tiptronic cars only

Note: Throttle extensions are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P442213

The product you are viewing cross references to these numbers

Rennline Aluminium 4 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 COUPE Manual cars only

Note: Throttle extensions, track mats, and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P442111

The product you are viewing cross references to these numbers

Rennline Aluminium 4 piece Pedal Set Perforated.
LHD Cars



Fits:
Porsche 911/912/930 1965-89 Targa and Cabrio Manual cars only
Porsche 964 1989-94 Manual cars only
Porsche 993 1995-98 Manual cars only


Note: Throttle extensions, track mats, and floorboards are not included.
Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P442113

The product you are viewing cross references to these numbers

Rennline Aluminium Dead Pedal Perforated.
LHD Cars



Fits:
Porsche 911/912/930 Coupe 1965-89

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P11

The product you are viewing cross references to these numbers

Rennline Aluminium Dead Pedal Perforated.
LHD Cars



Fits:
Porsche 911/912/930 Targa / Cabrio 1965-89
Porsche 964 1989-94 All
Porsche 993 1995-98 All
Porsche 944 1982-91 All
Porsche 924 1977-88 All
Porsche 968 1992-95 All

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P13

The product you are viewing cross references to these numbers

Rennline Aluminium Floor Board. Driver Side.
LHD Cars

Fits:
Porsche 911/912 COUPE 1965-73


Note: Pictures may not show actual product.

Rennline Aluminium Floor Board. Driver Side.
LHD Cars

Fits:
Porsche 911/912 TARGA / CABRIO 1965-73


Note: Pictures may not show actual product.