Track Control Arms FRONT

Street front control / A-Arm bushing kit.
Sold as a complete set, SET OF 4



Fits:
Porsche 911/912/930/914 all 1968-89

Street bushings for Porsche 911 and 914 front A-Arms are a direct replacement for your old rubber bushings. Eliminate steering slop brought on by 40+ year old rubber and improve suspension geometry under all conditions with our factory-feel street bushings.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134190100

The product you are viewing cross references to these numbers

Front control arm rubber bushing kit. 1 kit required per car.
DIY Bushings Kit.



Fits:
Porsche 911/912 1965-67

Front control arm rubber bushings are now available as a kit for self-installation. In addition to a complete set of 4 OEM spec rubber bushings, the kit includes our proprietary installation tools and instructions which are essential for successful installation. Use a pipe clamp or shop press to complete the install.

Restore Ride and Performance
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution.

Quality Design
Don't confuse Elephant Racing OEM spec control arm bushings with inferior products offered without installation tools. Those products have a loose fit to allow tool-less installation. The loose fit causes excessive bushing deformation, torsion bar rubbing, premature wear, bushing slippage, and changing corner balance. Be sure you are getting genuine Elephant Racing OEM spec bushings.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2290015

The product you are viewing cross references to these numbers

Front control A arm rubber bushing kit. 1 kit required per car.
DIY Bushings Kit.



Fits:
Porsche 911/912/930/914 1968-89 with installation tools

Front control arm rubber bushings are now available as a kit for self-installation. In addition to a complete set of 4 OEM spec rubber bushings, the kit includes our proprietary installation tools and instructions which are essential for successful installation. Use a pipe clamp or shop press to complete the install.

Restore Ride and Performance
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution.

Quality Design
Don't confuse Elephant Racing OEM spec control arm bushings with inferior products offered without installation tools. Those products have a loose fit to allow tool-less installation. The loose fit causes excessive bushing deformation, torsion bar rubbing, premature wear, bushing slippage, and changing corner balance. Be sure you are getting genuine Elephant Racing OEM spec bushings.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2290000

The product you are viewing cross references to these numbers

PolyBronze control arm bearings, Front.
Price is per kit. 1 kit req'd per car.



Fits:
Porsche 911 / 912 / 930 1968-89
Porsche 914


PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves

FRONT


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2051500

The product you are viewing cross references to these numbers

Front control arm bushing kit Heavy duty.
4pc Set of Heavy Duty Stiffer Rubber Bushings



Fits:
Porsche 911/912 1969-89
Porsche 930 1978-79
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Fits to No. 14 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134190999HD

The product you are viewing cross references to these numbers

Standard rubber front control arm bushings.



Fits:
Porsche 911/912 1969-89
Porsche 930 1978-79
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Fits to No. 14 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134190999

The product you are viewing cross references to these numbers

Front lower control arm bushing kit.



Fits:
Porsche 911 / 930 / 912 / 914 1965-89

Bring back that iconic Porsche handling with our new front lower control arm bushings. Designed to reduce drag, improve handling of your street or track driven 911, and built with longevity and durability in mind. Taking the rubber bushings out of the equation will retain optimal suspension geometry throughout the full range of motion while reducing compliance for a more direct feel.

• Bushing housings CNC machined from 6061-T6 Aluminum
• Close tolerance design for added rigidity
• Durable anodized finish resists corrosion
• Low friction Delrin bushing inserts
• Stainless steel bushing race & hardware
• Bushing race installation tool included
• Direct replacement of the OEM bushings
• Outlasts factory components
• Engraved Rennline logo

Polyurethane has been with us as a specialised plastic for some thirty years. However recent advances have now made it possible to engineer very special properties into this exciting material. Suspension bushes are some of the most highly stressed components fitted to a motor car. They undergo enormous strains and in the most arduous of conditions with no maintenance or lubrication.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-401

The product you are viewing cross references to these numbers

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2020903

The product you are viewing cross references to these numbers

Spring plate bushing tool.
1 required per lifetime.



Fits:
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Porsche 944 - 1982 to 1991
Porsche 968 - 1995 to 1995

We've developed this tool to simplify removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy.

This convenient cutting tool shaves the bushings off, removing nearly all the rubber thereby greatly simplifying the bushing removal process.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2061002

The product you are viewing cross references to these numbers

Trailing arm bushing installation tool. 1 req'd per lifetime.



Fits:
Porsche 911/912/930 1965-89

This tool allows installation of the trailing arm bushing without removing the arms from the car, and without a shop press. Can be used for installation rubber bushings as well as our Monoball Cartridges (hyperlink).

Recommended for use in combination with Split Bushing Removal Tool part #2020903

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2020904

2020904

90133105900

The product you are viewing cross references to these numbers