Track Rods

Bolt-on adjustable bump steer kit
1 kit required per car



Fits
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Porsche 944 - 1985 to 1991


Adjustable, Bolt-on and Weather Sealed

Fully adjustable adding from .5 to 1.25 inches of spacing in .125 inch increments.

Bump Steer Adjustable – Fully adjustable adding .5 to 1.25 inches of spacing in .125 inch increments. Yoke type spacer grips stock steering knuckle for added strength.

Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Rubber boots seal out dirt and and water for extended life.

Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods

Spindle Height – Suitable for spindle height ranging from stock up to 19mm.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2110901

The product you are viewing cross references to these numbers

Increased length turbo track rod assembly for lowered vehicles.
Price is for each.



Fits:
Porsche 911 1969 to 89
Porsche 911 turbo (930) 3.0/3.3ltr 1975 to 1989
Porsche 914 1970 to 1976

To be used when lowering ride height

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

930347031PR

The product you are viewing cross references to these numbers

Spring plate bush kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976


Precision Steering Under Pressure

Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.

Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.

Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.

Second steering knuckle is welded to the strut body

Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.

Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.

Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods

Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

211090

The product you are viewing cross references to these numbers

Steering rack inner retainer spring. Sold as each.



Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134730800

The product you are viewing cross references to these numbers

Steering rack inner retainer spring. Sold as each.



Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134730800

The product you are viewing cross references to these numbers

Steering rack outer retainer spring. Sold as each.



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134730900

The product you are viewing cross references to these numbers

Steering rack outer retainer spring. Sold as each.



Fits:
Porsche 911 1965-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134730900

The product you are viewing cross references to these numbers

Tie rod bellow support. Porsche 911 / 912 / 914



Fits:
Porsche 911 - 1969 to 1977
Porsche 914 - 1970 to 1976

2 Required per car

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134705602

The product you are viewing cross references to these numbers

Tie rod bellow support.



Fits:
Porsche 911 1969-77
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134705602

The product you are viewing cross references to these numbers

Tie rod joint fork.



Fits:
Porsche 911 1965-89 (not Turbo)
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134731503

The product you are viewing cross references to these numbers

Turbo tie rods.
(set of 2)

 


Fits
Porsche 911/912/914 1965-1968
Extra Long With Tie-Rod Ends

Improve steering precision and feedback

Turbo tie rods improve feedback and steering precision by replacing the rubber tie rod bushings with ball socket ends. Originally equipped on the 911 turbo, they can be installed on the normal 911, 912, & 914.

We offer turbo tie rods in standard length for '69-'89 911 series cars, and a special extra-long version for '65-'68 911/912. The '65-'68 cars have a narrow steering rack which causes inadequate tie rod thread engagement without our extra long turbo tie rods.

The standard kits are complete with tie rods, spacing washers, and steering rack boots for both sides. We also offer the kits without the tie rod ends. Choose this option if you are using a tie rod end bump steer kit

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7-93034703101

The product you are viewing cross references to these numbers

Turbo tie rods.
(set of 2)



Fits
Porsche 911/912/914 1965-68
Extra Long WithOut Tie-Rod Ends

Improve steering precision and feedback

Turbo tie rods improve feedback and steering precision by replacing the rubber tie rod bushings with ball socket ends. Originally equipped on the 911 turbo, they can be installed on the normal 911, 912, & 914.

We offer turbo tie rods in standard length for '69-'89 911 series cars, and a special extra-long version for '65-'68 911/912. The '65-'68 cars have a narrow steering rack which causes inadequate tie rod thread engagement without our extra long turbo tie rods.

The standard kits are complete with tie rods, spacing washers, and steering rack boots for both sides. We also offer the kits without the tie rod ends. Choose this option if you are using a tie rod end bump steer kit

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9-93034703101

The product you are viewing cross references to these numbers

Turbo tie rods. (SET OF 2)



Fits
Porsche 911/912/930/914 1969-1989
Std. Length With Tie-Rod Ends

Improve steering precision and feedback

Turbo tie rods improve feedback and steering precision by replacing the rubber tie rod bushings with ball socket ends. Originally equipped on the 911 turbo, they can be installed on the normal 911, 912, & 914.

We offer turbo tie rods in standard length for '69-'89 911 series cars, and a special extra-long version for '65-'68 911/912. The '65-'68 cars have a narrow steering rack which causes inadequate tie rod thread engagement without our extra long turbo tie rods.

The standard kits are complete with tie rods, spacing washers, and steering rack boots for both sides. We also offer the kits without the tie rod ends. Choose this option if you are using a tie rod end bump steer kit

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2-93034703101

The product you are viewing cross references to these numbers

Turbo tie rods. (SET OF 2)



Fits
Porsche 911/912/930/914 1969-1989
Standard Length WithOut Tie-Rod Ends

Improve steering precision and feedback

Turbo tie rods improve feedback and steering precision by replacing the rubber tie rod bushings with ball socket ends. Originally equipped on the 911 turbo, they can be installed on the normal 911, 912, & 914.

We offer turbo tie rods in standard length for '69-'89 911 series cars, and a special extra-long version for '65-'68 911/912. The '65-'68 cars have a narrow steering rack which causes inadequate tie rod thread engagement without our extra long turbo tie rods.

The standard kits are complete with tie rods, spacing washers, and steering rack boots for both sides. We also offer the kits without the tie rod ends. Choose this option if you are using a tie rod end bump steer kit

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

8-93034703101

The product you are viewing cross references to these numbers

Track rod end.



Fits:
Porsche 914 (1970 - 1976)
Porsche 914/6 (1970 - 1972)
Porsche 911 F (1965 - 1973) (also for 912)
Porsche 911 G (1974 - 1983)
Porsche 911 Turbo (1975 - 1989)
Porsche 911 Carrera (1984 - 1989)
Porsche 959 (1987 - 1988)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134732204

The product you are viewing cross references to these numbers

Fits to Left or Right side. Price is for each.



Fits:
Porsche 911 1965-89 Not Turbo models
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134732204

The product you are viewing cross references to these numbers

Track rod end.



Fits:
Porsche 911 TURBO (930) 3.0L/3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Please note the image may be different to the actual item.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Track rod end. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0L/3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Track rod end.



Fits:
Porsche 911 TURBO (930) 3.0L/3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Please note the image may be different to the actual item.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Track rod inner joint spacer.
Price is for each



Fits:
Porsche 911 TURBO (930) 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.


Click 'Zoom in' for large parts diagram.
Diagram Ref No 13B.

Please note the image may be different to the actual item.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034731301

The product you are viewing cross references to these numbers

Track rod inner joint.



Fits:
Porsche 911 1965-89 (Not Turbo)
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Click picture for large parts diagram.
Diagram Ref No 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705701

The product you are viewing cross references to these numbers

Track rod inner joint.



Fits:
Porsche 911 1965-89 (Not Turbo)
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Click picture for large parts diagram.
Diagram Ref No 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705701

The product you are viewing cross references to these numbers

Track rod upgrade Kit.
Price is for a kit which fits both left & right side.



Fits
Porsche 911 2.7/SC/3.2 1974-89
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The original factory 911 1974-89 tie rods use rubber dampers which can make steering feel spongy, especially with age. Upgrading to 911 Turbo tie rods will give your car firmer and more responsive steering. Installation is a straight-forward process, and can typically be performed in an afternoon.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod.



Fits:
Porsche 911/S/TU/L and 912 (1965 to 1969)
Porsche 911 (1970 to 1977)
Porsche 911 SC (1978 to 1983)
Porsche Carrera (1984 to 1989)
Porsche 914 (1970 to 1976)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134703102

The product you are viewing cross references to these numbers

Track rod.



Fits:
Porsche 911 1965-89 Left or Right side
Not Turbo models.
Porsche 914 Left or Right side

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Price is for each

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134703102

The product you are viewing cross references to these numbers

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod. Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Track rod.
Price is for each.



Fits:
Porsche 911 TURBO (930) 3.0/3.3L 1975-89
Porsche 914

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13/1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034703101

The product you are viewing cross references to these numbers

Turbo track rod end bump steer kit.
Sold as set - 1 set required per car



Fits
Porsche 911 / 930 turbo 1965-89
Porsche 912 1965-69
Porsche 914 1970-76

30mm lowering
Rubber boots are already in the housing – the part is already protect against dust and water so no extra boots are needed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers