Chassis / Bodywork
Filter by brand
Door hinge pin set. Porsche 911/912 / 914 /964 / 993
Code: 901531305KIT
Door hinge pin set. 2 Sets required per car.
Kit contains:
4 x 90153130520 pin
8 x 90153131121 bushing
Fits:
Porsche 911/912/930 1965-89
Porsche 912 E 1976
Porsche 914 1970-76
Porsche 964 1989-94
Porsche 993 1995-98
Click 'Zoom in' for large parts diagram.
Diagram ref no 3 and 4
Kit contains:
4 x 90153130520 pin
8 x 90153131121 bushing
Fits:
Porsche 911/912/930 1965-89
Porsche 912 E 1976
Porsche 914 1970-76
Porsche 964 1989-94
Porsche 993 1995-98
Click 'Zoom in' for large parts diagram.
Diagram ref no 3 and 4
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£46.00
Now £43.70
Stock due 
Front screen chrome moulding trim kit genuine. Porsche 911 1965 to 1983
Code: 90154191120KIT
Front screen moulding trim kit genuine.
Kit includes
Screen moulding - Right x 1
Screen moulding - Left x 1
Moulding connector x 2
Fits:
Porsche 911 - 1965 to 1983
Kit includes
Screen moulding - Right x 1
Screen moulding - Left x 1
Moulding connector x 2
Fits:
Porsche 911 - 1965 to 1983
Click 'Zoom in' for large parts diagram
Diagram Ref: 3, 4 & 5
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
£148.06
Now £140.66
In stock
Roll cage 6 point bolt in with single door bars. Porsche 911 / 912 1974 to 1989
Code: RBP022
Roll cage 6 point bolt in with single door bars.
For cars without sunroof
Not for Competition Use
Fits
Porsche 911 - 1974 to 1989
Porsche 912 - 1976
6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof
Build the roll cage to your individual specification using the rear cage and door bar options available below.
For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish
For cars without sunroof
Not for Competition Use
Fits
Porsche 911 - 1974 to 1989
Porsche 912 - 1976
6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches.
Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof
Build the roll cage to your individual specification using the rear cage and door bar options available below.
For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Prices from: £102.82
Aluminium door hinge set. Porsche 911 / 912 / 964 / 993
Code: 90153130321/1
CNC Machined Aluminium Door Hinge Set. (4 complete hinges)
Fits:
Porsche 911 / 912 / 930 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
CNC machined aluminium door hinges for use with lightweight doors.
Price is for 4 hinges (one full set for a car)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Fits:
Porsche 911 / 912 / 930 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
CNC machined aluminium door hinges for use with lightweight doors.
Price is for 4 hinges (one full set for a car)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£440.00
Now £426.80
Available from supplier
Billet aluminium adjustable bonnet hinges. Porsche 911
Code: E195
Billet aluminium adjustable bonnet hinges.
Fits
Porsche 911 / 912 - 1965 to 1989
Porsche 933 turbo - 1975 to 1989
Tired of inserting shims and adjusting bolts to line up your hood?
Now easily adjust your hood to the correct position in minutes with these Rennline Multi-Piece Billet Hood Hinges.
Built for quick and painless setup, these hinges allow for micro-adjustments to ensure smooth operation and perfect fitment of the hood.
Machined from billet aircraft grade aluminum and clear anodized, they come with all necessary hardware including CNC machined brass bushings.
Fits
Porsche 911 / 912 - 1965 to 1989
Porsche 933 turbo - 1975 to 1989
Tired of inserting shims and adjusting bolts to line up your hood?
Now easily adjust your hood to the correct position in minutes with these Rennline Multi-Piece Billet Hood Hinges.
Built for quick and painless setup, these hinges allow for micro-adjustments to ensure smooth operation and perfect fitment of the hood.
Machined from billet aircraft grade aluminum and clear anodized, they come with all necessary hardware including CNC machined brass bushings.
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£404.00
Now £391.88
In stock
Carbon fibre bonnet stay. Porsche 911 / 964 / 993
Code: 96451156900/1
Carbon fibre bonnet stay.
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Carbon fibre bonnet stay for your lightweight bonnet
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Carbon fibre bonnet stay for your lightweight bonnet
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£190.00
Now £184.30
Available from supplier
Carbon fibre smugglers box cover. Porsche 911 1969-89
Code: 91150404301/2
Carbon fibre smugglers box cover for LHD Cars
Fits:
Porsche 911 - 1969 to 1989
LHD cars only
Improve the under bonnet trunk look with this high quality, carbon fibre smugglers box cover.
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Fits:
Porsche 911 - 1969 to 1989
LHD cars only
Improve the under bonnet trunk look with this high quality, carbon fibre smugglers box cover.
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£486.40
Now £471.81
Available from supplier
Door edge guard for Porsche models
Code: 00004400125
Door edge guard
The ideal accessory for your own Porsche dream garage: The door edge guard offers safety when entering and leaving the vehicle. Its shock-absorbing material protects vehicle doors from scratches when opening. The door edge guard can be attached to smooth or rough surfaces using invisible screw points, for example on garage or workshop walls. Designed by Studio F. A. Porsche in Zell am See, the door edge guard bears the PORSCHE logo and the look of a road barrier.
- Set of two
- Dimensions: 800 mm x 84 mm x 50 mm (width x height x depth)
- Material: thermoplastic elastomer
- Note: Screws and dowels are not included.
The ideal accessory for your own Porsche dream garage: The door edge guard offers safety when entering and leaving the vehicle. Its shock-absorbing material protects vehicle doors from scratches when opening. The door edge guard can be attached to smooth or rough surfaces using invisible screw points, for example on garage or workshop walls. Designed by Studio F. A. Porsche in Zell am See, the door edge guard bears the PORSCHE logo and the look of a road barrier.
- Set of two
- Dimensions: 800 mm x 84 mm x 50 mm (width x height x depth)
- Material: thermoplastic elastomer
- Note: Screws and dowels are not included.
£99.22
Now £94.26
Available from supplier
Door hinge with loose pin to fit both left and right Porsche 911 01/1963-07/1973
Code: 90153103120/1
Door hinge with loose pin to fit both left and right Porsche 911 01/1963-07/1973
Fits:
Porsche 911 01/1963-07/1973
Click 'Zoom in' for large parts diagram.
Diagram ref no 2, 7, 5
Fits:
Porsche 911 01/1963-07/1973
Click 'Zoom in' for large parts diagram.
Diagram ref no 2, 7, 5
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£93.00
Now £90.21
Available from supplier
Porsche Classic Special Silicone Remover
Code: PCG04400093
Porsche Classic Special Silicone Remover. 1000ml bottle.
For All Classic models
Specially developed for your Porsche: The Porsche Classic Special Silicone Remover.
The special silicone remover is suitable for year-round use in vehicles with an intensive washer system. It is frost-proof down to -20°C.
Straight from the racetrack: the special silicone remover can be used to remove even the most stubborn of silicone stains and other dirt from the windscreen. It can also be used as a cleaning agent for the windows of your classic car if they are heavily soiled.
Please note: This liquid is classed as flammable and can not be shipped by air.
Additional information
Excluding USA.
For All Classic models
Specially developed for your Porsche: The Porsche Classic Special Silicone Remover.
The special silicone remover is suitable for year-round use in vehicles with an intensive washer system. It is frost-proof down to -20°C.
Straight from the racetrack: the special silicone remover can be used to remove even the most stubborn of silicone stains and other dirt from the windscreen. It can also be used as a cleaning agent for the windows of your classic car if they are heavily soiled.
Please note: This liquid is classed as flammable and can not be shipped by air.
Additional information
Excluding USA.
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£10.33
Now £9.81
Available from supplier
Rennline universal silicone rear stone chip guards
Code: E300
Rennline universal silicone rear stone chip guards
Protect the paint on your rear fender and bumper with Rennline Rear Chip Guards.
Chipping paint was a common problem the we noticed on our own builds and track cars so we developed this solution to prevent this paint damage.
The Rear Chip Guards come in a set of two (2) and are available in three sizes: 18 inches / 20 inches / 24 inches. These chip guards install along the leading edge of your rear bumper and prevent paint damage resulting from rocks coming off the rear tires. These guards can be trimmed to fit depending on your preferred placement on the rear bumper, and they adhere with 3m adhesive tape which comes preinstalled.
Compatible with most vehicles
Protect the paint on your rear fender and bumper with Rennline Rear Chip Guards.
Chipping paint was a common problem the we noticed on our own builds and track cars so we developed this solution to prevent this paint damage.
The Rear Chip Guards come in a set of two (2) and are available in three sizes: 18 inches / 20 inches / 24 inches. These chip guards install along the leading edge of your rear bumper and prevent paint damage resulting from rocks coming off the rear tires. These guards can be trimmed to fit depending on your preferred placement on the rear bumper, and they adhere with 3m adhesive tape which comes preinstalled.
Compatible with most vehicles
Prices from: £110.58
RHD conversion or restoration foot pedal plates. Porsche 911
Code: SC80-D7
RHD conversion or restoration foot pedal plates.
Fits:
Porsche 911 / 912 / 930 - 1965 to 1989
These stamped plates are to convert a LHD car to RHD or can be used in a restoration when needed.
These will fit all 911s up to 1989.
Pedals and pedal box not included
Fits:
Porsche 911 / 912 / 930 - 1965 to 1989
These stamped plates are to convert a LHD car to RHD or can be used in a restoration when needed.
These will fit all 911s up to 1989.
Pedals and pedal box not included
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£630.80
Now £611.88
Available from supplier
Richbrook anti-theft number plate bolts
Code: 100060
Richbrook Anti-Theft Number Plate Bolts
Protect yourself from the pain and inconvenience of number plate theft.
These days, criminals are stealing the number plates from the cars of innocent motorists to use for nefarious purposes. Either changing the identity of a stolen car, or to allow them to rack up various motoring offences, whilst you get the tickets. Don't become a victim!
Our solution to this increasingly common crime uses special 'spinning sleeves', which mean that thiefs can't use normal tools to remove your plates.
Each pack comes with 2 black. 2 Yellow and 2 Silver bolts. 1 unique locking key and 1 hex wrench.
This could be the best money you ever spend on your car.
Don't let it happen to you!
Protect yourself from the pain and inconvenience of number plate theft.
These days, criminals are stealing the number plates from the cars of innocent motorists to use for nefarious purposes. Either changing the identity of a stolen car, or to allow them to rack up various motoring offences, whilst you get the tickets. Don't become a victim!
Our solution to this increasingly common crime uses special 'spinning sleeves', which mean that thiefs can't use normal tools to remove your plates.
Each pack comes with 2 black. 2 Yellow and 2 Silver bolts. 1 unique locking key and 1 hex wrench.
This could be the best money you ever spend on your car.
Don't let it happen to you!
£5.95
Now £5.77
In stock
Rubber bonnet/boot hooks SMALL (Set of 2) for Porsche
Code: E73
Rubber bonnet/boot hooks
SMALL
(Set of 2).
It is the little touches that make a project, so whether you are doing a backdate, replica, restomod or tribute car you want the details to be correct. Complete the front of your car with these RSR Replica Rubber Bonnet Hooks; not only do they look the part but they shave complexity and weight just like the factory versions. A perfect complement for any build, these Bonnet Hooks will make sure when people see you coming they know you have paid attention to every facet of your build.
SMALL
(Set of 2).
It is the little touches that make a project, so whether you are doing a backdate, replica, restomod or tribute car you want the details to be correct. Complete the front of your car with these RSR Replica Rubber Bonnet Hooks; not only do they look the part but they shave complexity and weight just like the factory versions. A perfect complement for any build, these Bonnet Hooks will make sure when people see you coming they know you have paid attention to every facet of your build.
Price: £65.00
In stock
Sway bar backdate mounting kit. Porsche 911 / 912 / 930 / 914
Code: 2270025_2270024
Sway bar backdate mounting kit
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
1 kit required per car
Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£72.00
Now £69.84
In stock
Sway bar mounting backer plate kit. Porsche 911 / 912 / 930 / 914
Code: 2270024
Sway bar mounting backer plate kit
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
1 kit required per car
Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
For Retro-Fitting the Through Body Anti Roll Bar
Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.
Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£55.00
Now £53.35
In stock
Through glass door mirror kit. Porsche 911 / 964 / 993 coupe
Code: SC11
Through glass door mirror kit.
Are you looking to personalise your 911 build, then this is the product for you.
Coupe Only
This 95mm round convex mirror allows great rear view vision which are fully adjustable from inside the car.
These mirrors are supplied with the quarter light window pre-drilled with the mounting hole.
Available in nickel or satin black. Sold as a pair.
Available with nickel or satin black finish and made from SLA resin.
Sold as a pair
This item is 100% made in the UK.
Are you looking to personalise your 911 build, then this is the product for you.
Coupe Only
This 95mm round convex mirror allows great rear view vision which are fully adjustable from inside the car.
These mirrors are supplied with the quarter light window pre-drilled with the mounting hole.
Available in nickel or satin black. Sold as a pair.
Available with nickel or satin black finish and made from SLA resin.
Sold as a pair
This item is 100% made in the UK.
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Prices from: £2,211.60
Through glass door mirror kit. Porsche 911 / 964 / 993 targa and convertible
Code: SC11C-C8::1
Through glass door mirror kit.
Are you looking to personalise your 911 build, then this is the product for you.
Targa and Convertible Only
This 95mm round convex mirror allows great rear view vision which are fully adjustable from inside the car.
These mirrors are supplied with the quarter light window pre-drilled with the mounting hole.
Available in nickel or satin black. Sold as a pair.
Available with nickel or satin black finish and made from SLA resin.
Sold as a pair
This item is 100% made in the UK.
Are you looking to personalise your 911 build, then this is the product for you.
Targa and Convertible Only
This 95mm round convex mirror allows great rear view vision which are fully adjustable from inside the car.
These mirrors are supplied with the quarter light window pre-drilled with the mounting hole.
Available in nickel or satin black. Sold as a pair.
Available with nickel or satin black finish and made from SLA resin.
Sold as a pair
This item is 100% made in the UK.
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Prices from: £2,211.60
Window adhesive set for all Porsche models
Code: 00004330535
Window adhesive set for all Porsche models
£162.29
Now £154.18
In stock
DISPLAYING 1 to 19 (of 19 products)
About Chassis / Bodywork
We offer a huge range of Porsche Chassis Parts for as many models of Porsche that you could think of. We have a full selection of Porsche Restoration Parts and Porsche Backdating Kits.
If you need anything from a new windscreen to Porsche Body Panels & Repair Panels, Boot Lids, Bumpers and Roll Cages. Our Porsche Chassis parts are all made from high-quality materials, we have both original Porsche parts and in some cases the Aftermarket equivalents. All of our Porsche Body Parts are expertly packed up and sent out all over the world.
Which Porsche Body Parts are essential?
It is very important for you to stay on top of keeping your Porsche properly maintained. Why spends thousands of pounds on a premium car if you aren’t going to keep it in the best condition possible. Should you damage a bumper, the windscreen or your mirrors, the replacements could be in the post and on their way to you today at some of the most competitive prices within the industry!
Keeping your Porsche looking factory fresh is really in your own best interest as it helps your vehicle maintain (or grow) its value over the years and keeps the neighbour peeking over the fence with envy. We have Porsche parts for every car you could think of, from the Porsche Cayenne and Macan to parts for a classic 1950s 365 and everything in-between.
Have any questions about which Porsche Body Part you need for your specific vehicle? Give our expert customer service team a call!
Do you have aesthetic Porsche Body Parts for Customisation?
We absolutely sell Aesthetic Porsche Body Parts - allowing you to customize (or backdate) your Porsche to exactly how you want it. For some models of Porsche, changing the Bumpers and wings (and other bits and pieces) allows you to make your Porsche look more like an older or newer model, potentially making it more desirable.
There are several Iconic Spoilers / Boot Lids on the early Porsche 911’s and everybody has a personal favorite, so if there's one you prefer and it is compatible with your car, why not take the plunge!
We have ‘Tea Tray’ Spoilers, Ducktail Spoilers, Whale Tail Spoilers and anything else that you could think of. We also have all of the necessary parts to get the modification safely attached to your car!
Please research or check with us regarding Porsche Chassis Parts in question and whether or not it is appropriate for your model of car.
You may also like
-
Accessories
-
Brakes
-
Clothing & Gifts
-
Electrical & Relays
-
Engine Cooling
-
Engine Electrical
-
Engine Rebuild Parts
-
Exhausts
-
Exterior Styling / Spoilers
-
Gearbox / Transmission
-
Heating / Air Conditioning
-
Hydraulics
-
Interior & Accessories
-
Incar / Multimedia
-
Lighting
-
Mats & Carpets
-
Pedal Cluster
-
Performance Parts
-
Rubber Seals
-
Seats & Seat Belts
-
Service Parts
-
Steering Parts
-
Suspension & Axle
-
Suspension Upgrades
-
Tyres
-
Wheels
-
Wheel Accessories
-
Special Offer Parts
-
Parts for Other Cars
Popular Models
