Anti Roll Bar

Front QuickChange™ Blade Style Sway bar

1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Front and Rear QuickChange™ Blade Style Sway Bar System

Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.

Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.

The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts

Perfect Geometry

Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.

Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.

Lightweight

Hollow bar reduces weight.

Fast and Easy Adjustment

No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.

For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

227002

The product you are viewing cross references to these numbers

Front anti-roll bar 15mm.



Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 914 1970-76

Genuine Porsche anti roll bar is no longer in production so this is a great alternative!

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134370303

The product you are viewing cross references to these numbers

Rear retro RSR adjustable sway bar.



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Retro RSR Adjustable Sway Bar System

Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.

Drop links

Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.

Lightweight

Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings

Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.

Through-body style front bar

Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.

Retro-Look Arms

Steel arms are similar to the original RSR type and have drilled adjustment positions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1-RSRRSBA

The product you are viewing cross references to these numbers

Stabiliser / torsion bar mounting plate.



Fits:
Porsche 911/911 S / 912 1965-67
Porsche 911 S/L / 912 1968-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 911 (930) Turbo 1795-77
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134375401

The product you are viewing cross references to these numbers

Stabiliser / torsion bar mounting plate.



Fits:
Porsche 911/911 S / 912 1965-67
Porsche 911 S/L / 912 1968-69
Porsche 911 S / Carrera 2.7 / 911 T/E 1970-73
Porsche 911 (930) Turbo 1795-77
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134375401

The product you are viewing cross references to these numbers

Stabilizer set, complete.
Stabiliser Diameter: 15mm



Fits:
Porsche 914 1.7-2.0 01/69-02/76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134370303

The product you are viewing cross references to these numbers

Sway bar backdate mounting kit
1 kit required per car



Fits
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

When installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Through-Body Sway bar Conversions
• Not required for Elephant Racing Blade Type Sway bars
• Welding required for proper installation

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025_2270024

The product you are viewing cross references to these numbers

Sway bar mounting backer plate kit
1 kit required per car



Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270024

The product you are viewing cross references to these numbers

U-tab kit.



Fits:
Porsche 911 / 912 / 930 1969-89
Porsche 914 1970-76

Required when installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Thru-Body Swaybar Conversions
• Not required for Elephant Racing Blade Type Swaybars
• Welding required for proper installation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025

The product you are viewing cross references to these numbers