Specialist Tools
Refine by Car Type
Filter by brand
Bearing grease. Porsche 356 / 911 / 912 / 924 / 928 / 944 / 968
Code: PCG04311000
Bearing grease (200 g)
Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
The product you are viewing cross references to these numbers
Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG04311000
PCG04311000
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Price: £22.50
In stock 
Belt tensioner tool for toothed belt. Porsche 924S / 944 86>>
Code: 7314
Belt tensioner for toothed belt.
Made in Germany
Fits:
Porsche 924S 2.5L 1986-88
Porsche 944 2.5L / 2.7L 1986>>
Porsche 944 S2 3.0L
Porsche 944 Turbo 951 2.5L
Here you get a tool to adjust the belt tensioner of the timing belt on your Porsche 924S and 944 from 1986 onwards. With this tool the adjustment of the belt tension is also possible under narrow space conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7314
The product you are viewing cross references to these numbers
Made in Germany
Fits:
Porsche 924S 2.5L 1986-88
Porsche 944 2.5L / 2.7L 1986>>
Porsche 944 S2 3.0L
Porsche 944 Turbo 951 2.5L
Here you get a tool to adjust the belt tensioner of the timing belt on your Porsche 924S and 944 from 1986 onwards. With this tool the adjustment of the belt tension is also possible under narrow space conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7314
7314
94410506714
94410506709
9441056119R
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
£31.00
Now £30.38
In stock
Connector removal tool - for VAG, Porsche
Code: 6547
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
The product you are viewing cross references to these numbers
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
6547
The product you are viewing cross references to these numbers
£31.75
Now £31.11
In stock
Connector removal tool long series - for VAG/Porsche
Code: 7859
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
The product you are viewing cross references to these numbers
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
7859
The product you are viewing cross references to these numbers
£19.46
Now £19.07
In stock
Key tool for locking the balance shafts. Porsche 924S / 944 / 968
Code: 1113
Special key for locking the balance shafts.
Porsche ref no 00072192000.
Fits:
Porsche 924 S
Porsche 944
Porsche 968
This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.
Made in Germany.
Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1113
The product you are viewing cross references to these numbers
Porsche ref no 00072192000.
Fits:
Porsche 924 S
Porsche 944
Porsche 968
This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.
Made in Germany.
Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1113
1113
00072192000
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£39.00
Now £38.22
In stock
key tool for timing belt replacement, 27mm. Porsche 924S / 944 / 968
Code: 1130
Special key for timing belt replacement, 27mm.
Made in Germany
Fits:
Porsche 924S
Porsche 944
Porsche 968
Description:
The tool is for loosening and tightening the hard to reach running / tensioning rollers and allows a secure and defined tightening.
The tool has been specially developed for this application only and allows the correct replacement of the balance shaft belt and / or timing belt. The narrow design of the keyhole and the double offset offer the best possible accessibility to the key areas behind the rollers.
The key is 100% German produced. Material and component geometry were designed for the maximum load cases in this application. The corrosion protection is galvanic blue galvanizing.
Note:
Only an outdated 24mm wide version of the tool is available at Porsche although the manufacturers of the wheels are already adjusted to 27mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1130
The product you are viewing cross references to these numbers
Made in Germany
Fits:
Porsche 924S
Porsche 944
Porsche 968
Description:
The tool is for loosening and tightening the hard to reach running / tensioning rollers and allows a secure and defined tightening.
The tool has been specially developed for this application only and allows the correct replacement of the balance shaft belt and / or timing belt. The narrow design of the keyhole and the double offset offer the best possible accessibility to the key areas behind the rollers.
The key is 100% German produced. Material and component geometry were designed for the maximum load cases in this application. The corrosion protection is galvanic blue galvanizing.
Note:
Only an outdated 24mm wide version of the tool is available at Porsche although the manufacturers of the wheels are already adjusted to 27mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1130
1130
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£31.00
Now £30.38
In stock
Mounting bolt kit for engine & gearbox stand
Code: SR028
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
£65.36
Now £64.05
Available from supplier
Removal tool injectors filter. Porsche 911 / 996 / 924S / 944 / 968
Code: 5167
Removal tool injectors filter.
Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968
Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5167
The product you are viewing cross references to these numbers
Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968
Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
5167
5167
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£20.00
Now £19.60
In stock
Special tool for heat exchanger. Porsche 924S / 944 / 968
Code: 1120
Assembly tool for oil cooler repairs.
Porsche ref no 0007219261.
Fits:
Porsche 924 S (from 08.87)
Porsche 944 2.5 / 2.7 / S / S2 / Turbo (from 08.87)
Porsche 968
The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.
Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1120
The product you are viewing cross references to these numbers
Porsche ref no 0007219261.
Fits:
Porsche 924 S (from 08.87)
Porsche 944 2.5 / 2.7 / S / S2 / Turbo (from 08.87)
Porsche 968
The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.
Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1120
1120
0007219261
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£44.00
Now £43.12
In stock
Special tool for heat exchanger. Porsche 924S / 944 until 1987
Code: 1121
Assembly tool for oil cooler repairs.
Porsche ref no 00072192150.
Fits:
Porsche 924 S (until 07.1987)
Porsche 944 2.5 / S / turbo (until 07.87)
= all models with old heat exchanger housing
The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.
Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1121
The product you are viewing cross references to these numbers
Porsche ref no 00072192150.
Fits:
Porsche 924 S (until 07.1987)
Porsche 944 2.5 / S / turbo (until 07.87)
= all models with old heat exchanger housing
The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.
Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1121
1121
00072192150
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 944 2.5L 8V 1982-87
£31.00
Now £30.38
In stock
DISPLAYING 1 to 10 (of 10 products)
You may also like
-
Gaskets & Sets
-
Radial Seal / RMS / Camshaft / Balance shaft
-
Oil System Parts
-
Fuel System Parts
-
Belts / Tensioners / Rollers
-
Chains & Tensioners
-
Engine Bearings / Shells
-
Engine Valves / Guides / Springs
-
Engine Bolts / Studs
-
Piston Rings
-
Connecting Rod
-
Cylinder Head / Camshaft Carrier
-
Camshaft covers / Gaskets
-
Camshaft gears / sprockets and fixings
-
Crankcase Parts
-
Crankshaft & Parts
-
Engine Mounts
-
Turbo Chargers / Intercoolers & Parts
-
Air Intake & Injection
-
Carburetors & Parts
Popular Models
