Steering Wheels Parts

Atiwe ATI steering wheel PCD adapter to Momo OMP Sparco 6 x 70mm hub boss kit



This adapter plate allows you to fit Atiwe/Italvolanti/ATI steering wheels with a 3 bolt PCD to and steering wheel hub kit with a 6 x 70mm PCD, including Momo, OMP, Sparco, Simoni and more.

You can use this adapter plate to fit a Porsche Club Sport steering wheel to a Momo hub kit, saving the time and expense of purchasing an Atiwe hub kit.

BELOW ARE TYPICAL PCD sizes FOR BRAND STEERING WHEELS:
MOMO 6 x 70mm PCD
OMP 6 x 70mm PCD
SPARCO 6 x 70mm PCD
ITALVOLANTI 6 x 70mm PCD


This adapter will NOT work with the following hub kits:
NARDI/PERSONAL 6 x 74mm PCD
RAID 6 x 74mm
MOUNTNEY TRADITIONAL 101mm PCD.
ATIWE AIRBAG EQUIPPED STEERING WHEELS.

THE ADAPTER RING IS MADE FROM AEROSPACE GRADE ALUMINIUM BILLET WITH 5mm THREAD BOLT HOLES TO ATTACH TO THE BOSS KIT.
IT COMES WITH 5 BRAND NEW FITTING BOLTS TO ATTACH THE ADAPTER TO THE BOSS KIT (THE BOTTOM BOLT THREAD IS NOT USED) AND 3 BRAND NEW FITTING BOLTS TO ATTACH THE ATIWE STEERING WHEEL TO THE BOSS KIT.
DIMENSIONS
OUTER DIAMETER: 88mm
INTERNAL DIAMETER: 55mm
DEPTH: 10mm
PLEASE NOTE THAT THERE IS NO BOSS/HUB KIT OR STEERING WHEEL INCLUDED, ONLY THE ADAPTER, BOLTS AND ALLEN KEY ARE INCLUDED. PHOTOGRAPHS 7 TO 10 ARE FOR ILLUSTRATION ONLY.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

451099

The product you are viewing cross references to these numbers

Used when fitting an aftermarket steering wheel, a hub kit is an essential component to your vehicle.

B-G Hub Kits are produced in Italy from the finest cast aluminium materials and are dual drilled to be compatible with various steering wheels featuring either a 6 x 70mm PCD pattern (such as MOMO, Sparco, OMP, Simoni, Mountney M-Range) or 6 x 74mm PCD pattern (such as Nardi, Personal, Raid).
All B-G Hub Kits are supplied with a 24 month warranty as standard.

Please Note: All our hub kits come complete with fixing screws, allen key, airbag resistor (if applicable) and horn button retaining ring.

Contact unit for horn on sports steering wheel.
PLEASE NOTE: Only for vehicles without an airbag.



Fits:
Porsche 911 G (1974 - 1989)
Porsche 964 RS (1992 - 1992)
Porsche 928 / S / S4 (1980 - 1991)
Porsche 944 / S / S2 / Turbo(1982 - 1991)
Porsche 959 (1987 - 1988)
Porsche 968 (1992 - 1995) only for Clubsport

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG34783500

The product you are viewing cross references to these numbers

Cover for steering column stalk switch, Cobalt Blue.
Only for vehicles without an airbag.



Fits:
Porsche 928 S4 (1991 - 1991)
Porsche 928 GTS (1992 - 1993)

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

928552567026ZF

The product you are viewing cross references to these numbers

Cover for steering column stalk switch, Cobalt Blue.
Only for vehicles with an airbag.



Fits:
Porsche 928 S4 (1991 - 1991)
Porsche 928 GTS (1992 - 1993)

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

928552567036ZF

The product you are viewing cross references to these numbers

Cover for steering column stalk switch, Magenta.
Only for vehicles without an airbag.



Fits:
Porsche 928 S4 (1991 - 1991)
Porsche 928 GTS (1992 - 1993)

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

928552567026WX

The product you are viewing cross references to these numbers

Cover for steering column stalk switch, Magenta.
Only for vehicles with an airbag.



Fits:
Porsche 928 S4 (1991 - 1991)
Porsche 928 GTS (1992 - 1993)

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

928552567036WX

The product you are viewing cross references to these numbers

Fixing element for baffle plate on sports steering wheel.



Fits:
Porsche 911 G (1974 - 1989)
Porsche 964 RS (1992 - 1992)
Porsche 928 / S / S4 (1980 - 1991)
Porsche 944 / S / S2 / Turbo(1982 - 1991)
Porsche 959 (1987 - 1988)
Porsche 968 (1992 - 1995) only for Clubsport

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG34784000

The product you are viewing cross references to these numbers

Heritage leather embossed crest horn push button cigar brown

Description
For the first time in history, an embossed leather horn button is now available from MOMO

The MOMO Heritage Brown Cigar Leather horn push has two electrical contacts enabling ease of fitment across all vehicles in today’s market.
Featuring the Heritage stacked MOMO logo embossed into the premium Brown Cigar leather, this horn button is 100% handmade in Italy. 

This Horn Button will fit all MOMO Steering Wheel Models, and must be used with the "Standard Profile" Retaining Ring (M22135311115)

Insulating bush for steering wheel.



Fits:
Porsche 911 1978-84
Porsche 924 1976-85
Porsche 928 1978-82
Porsche 944 1982-85

Quantity as Needed.

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

321419779

The product you are viewing cross references to these numbers

Insulating bush for steering wheel.



Fits:
Porsche 911 1985-89
Porsche 964 C2/ C4 1989-94
Porsche 924 / 924S / 924 Turbo 1976-88 For Sport Steering wheels 361 mm
Porsche 928 / S / S4 1978-91 for 92834708402
Porsche 944/1 & 944/2 1982-1991
Porsche 968 1992-1995

Quantity as Needed.

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

321419779A

The product you are viewing cross references to these numbers

MOMO Horn Button 2 Contact - Embossed Black Leather Arrow



For the first time in history, an embossed leather horn button is now available from MOMO!

The MOMO Arrow Black Leather horn push has two electrical contacts enabling ease of fitment across all vehicles in today’s market.

Featuring a MOMO Arrow logo embossed into the premium black leather, 100% handmade in Italy. 

This Horn Button will fit all MOMO Steering Wheel Models, and must be used with the "Low Profile" Retaining Ring (M22135311116)

MOMO Horn button retaining ring - Low Profile



Used to attach a MOMO Horn Button to any MOMO steering wheel, this Horn Button Retaining Ring is compatible with all flush-fitment MOMO horn buttons that require a securing plate from the rear of the steering wheel.

Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

To be used with Flush fitment horn buttons which sit flush to the steering wheel face.

Outer Diameter: 80mm
Inner Diameter: 51mm
Bolt Hole Diameter: 0.65mm
Fitment: 6 Bolt

Heritage leather embossed crest horn push button cigar brown

Description

Used to attach a MOMO Horn Button to any MOMO steering wheel, this Horn Button Retaining Ring is compatible with all MOMO horn buttons that require a securing plate from the rear of the steering wheel.

Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

To be used with "Standard" fitment horn buttons which sit Proud of the steering wheel face.

• Outer Diameter: 80mm
• Inner Diameter: 51mm
• Bolt Hole Diameter: 0.65mm
• Fitment: 6 Bolt

MOMO Standard horn button 2 Contact - Embossed Black Leather Arrow



For the first time in history, an embossed leather horn button is now available from MOMO!

The MOMO Arrow Black Leather horn push has two electrical contacts enabling ease of fitment across all vehicles in today’s market.

Featuring a MOMO Arrow logo embossed into the premium black leather, 100% handmade in Italy. 

This Horn Button will fit all MOMO Steering Wheel Models, and must be used with the "Standard Profile" Retaining Ring (M22135311115). 

Steering wheel adaptor, to fit a 991 (or even a 997) steering wheel on a 964, 928, 968 or a 944

For late cars with airbags

With this adaptor you can install a 991 or 997 steering wheel on the older Porsche models.

WARNING: The adaptor is mechanical only, you should purchase a 997 or 991 steering wheel without the steering wheel commands, because is not possible to make them work on the old electronics.

The new style airbag will not work. Any test to connect the airbag connector to the 997/991 socket(s) is at your own risk.

MATERIALS: Billet aluminum and steel CNC machined, PVC machined external cover

FINISH: Matt black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P-964-991-0001

The product you are viewing cross references to these numbers

Adjustable steering wheel spacer, brings the steering wheel from 45mm to 70mm closer to the driver, for increased comfort. Multi drilled to accommodate most aftermarket steering wheels.
You will still require the steering wheel boss kit.



Materials: ALUMINIUM
Sizes: 45MM > 70MM

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 968 1992-95
Porsche 924S 1986-88
Porsche 944 1986>>
Porsche 928 1978-95


Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns to accommodate the majority of aftermarket steering wheels.

The B-G Adjustable Steering Wheel Spacer is produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, offering the ability to bring the steering wheel between 45mm to 70mm closer to the driver.

Compatible with various steering wheels featuring either a 6 x 70mm PCD pattern (such as MOMO, Sparco, OMP, Simoni, Mountney M-Range)



If you have an existing 6 bolt after market steering wheel (non-airbag) this hub kit will allow the fitment to most models.

Fits:
Porsche 928 1989 onwards

The B-G Steering Wheel Quick Release System allows the user to quickly and easily attach/detach the majority of aftermarket steering wheels from the hub, offering the ultimate anti-theft solution by allowing complete removal of the steering wheel when not in use.



Materials: ALUMINIUM
Feature: PUSH PIN RELEASE
Sizes: 60MM Depth

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 968 1992-95
Porsche 924S 1986-88
Porsche 944 1986>>
Porsche 928 1978-95

The B-G Quick Release Steering Wheel System is designed for fitment to most aftermarket steering wheels, including all of the MOMO range. Machined from high-quality aluminium and finished in satin black / polished aluminium, the system features a fail-safe push pin system to prevent premature unlocking, but allows rapid removal of the steering wheel when required.

The B-G system is particularly suited to cars where optimum steering wheel height leaves little clearance when driving, but also enables greater flexibility when prepping an alternative driving seat/steering wheel combination.

B-G 60mm steering wheel spacer, brings the steering wheel closer to the driver, for increased comfort. Multi drilled to accommodate most aftermarket steering wheels.



Materials: ALUMINIUM
Sizes: 60MM

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 968 1992-95
Porsche 924S 1986-88
Porsche 944 1986>>
Porsche 928 1978-95


The B-G Racing 60mm Steering Wheel Spacer which comes in a black anodised finish is made from high quality aluminium and comes complete with fixing screws.

Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns to accommodate the majority of aftermarket steering wheels, enabling cross compatibility between hub kits and steering wheels with either 6x70mm or 6x74mm PCD patterns. This means you can use your MOMO steering wheel with your Nardi-Personal hub kit or vice versa. Can also be utilised as a simple hub spacer when used with a steering wheel and hub kit with identical PCD bolt patterns.

The B-G Racing Steering Wheel Spacer is also available in sizes: 10mm, 20mm, 40mm, 80mm, 100mm and 120mm, sold separately.

• First Class Design
• Impeccable Racing Pedigree
• Suitable for Simulators
• One Year Warranty

Please Note: If you need to fit a horn button in the centre of your steering wheel, please also purchase the B-G Racing Low Profile Horn Button Retaining Ring.

Steering Wheel Contact Ring.

 


Fits:
Porsche 928 1978-91
Porsche 928 1992-95 (M564 - Without airbag)
Porsche 944 1985-91
Porsche 968 1995-98 (not for 968 CS)
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92834709900

The product you are viewing cross references to these numbers

Steering wheel spacer for Porsche 964 / 928 / 944 / 968 For cars with airbags

Fits
Porsche 911 (964)
Porsche 928 S4
Porsche 944 S2 / turbo
Porsche 968
Manual and Tiptronic

This is the ideal solution for cars which do not have steering wheel depth adjustment which is inconvenient for tall people.

It is perfect for those who want to bring the steering wheel closer to the driver without resorting to the goblet steering wheel, which, as is well known, does not have an airbag.

The assembly of the spacer is simple and reversible, in case you want to remove from the car everything goes back to the way it was before.

FINISH: Matt black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P964-00001

The product you are viewing cross references to these numbers

Steering Wheel Horn Contact



Use with Porsche 964 and 993 models cars which have an steering wheel airbag.

Order when ordering Part No ID993347084808YR
- Porsche 964 1990-94
- Porsche 993 1994-97

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96465210400

The product you are viewing cross references to these numbers

Steering Wheel Spacer 15mm Hub Eccentic MOMO

Stops your fingers getting to close to the dashtop and move up or down.

If you have an existing 6 bolt after market steering wheel (non-airbag) this spacer kit will allow the fitment to most models.

Steering Wheel Spacer 15mm MOMO

Stops your fingers getting to close to the dashtop.