Tow Eye Hooks & Tie Downs

Rennline retractable tow hook set. Porsche 911 74-89 or UNIVERSAL

Code: E1718

Rennline retractable tow hook set. FRONT & REAR.

Fits:
Porsche 911/930 1974-89 FRONT & REAR

A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as "bolt on" units for any corner of your 1974-1989 911, 930, 912 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you.

To see this hook in action, CLICK HERE

Note: Pictures may not show actual product.

About this kit

Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5)

Rennline Tie Downs. UNIVERSAL

Code: E04

Rennline Tie Downs. UNIVERSAL

SET OF 2

Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations: straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.

The 66° tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down.

Note: These come in sets of 2

Note: Pictures may not show actual product.

Zoom in (1)

Brey Krause Tow Hook for Porsche 944 1985.5-1991

Code: R-9036

Brey Krause Tow Hook

breykrause

For Porsche 944 1985.5-1991

Material: 304 Stainless Steel
Finish: Red powder-coat
Weight: 1 lb.
Models: 944 1985-1/2 and up
Installation: Mounts to existing bolts, right or left side

For Installation instructions please CLICK HERE

Brey Krause Tow Hook for Porsche 964 / 993 / 996 / 997 / 944 / 924 / 968 / Boxster / Cayman

Code: R-9037

Brey Krause Tow Hook for Porsche

breykrause

For all Porsche models that accept screw type tow hooks, Front and Rear

The R-9037 Fold Down Tow Hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits Porsche's with factory screw-type tow hooks (excluding Cayenne models). It has a two inch towing eye, which is required for track events. It is precision CNC machined stainless steel, tig welded, and has a polished shaft and rubber locking rod to prevent loosening.

Material: Stainless steel finish: polished shaft, chrome-finished towing eye
Weight: 1.35 lbs.
Models: For Porsches that come with a factory screw type tow hook, excluding Cayenne models.
Installation: Installs in seconds, directly into the existing tow hook hole.
Miscellaneous: Precision CNC machined shaft and tig welded.

Rennline Folding tow hook - REV2. Porsche 992

Code: E19213R

Rennline Folding tow hook - REV2.

Fits
Front - Porsche 911 (992) 2020>>
Front - Porsche 911 (992) GT3 2021>>
Rear - Porsche 911 (992) 2020>>
Rear - Porsche 911 (992) GT3 2021>>

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
Red "TOW" Graphic
• Go Pro Camera mount compatable (Mount sold Separately)

Note: Pictures may not show actual product.

Rennline folding tow hook rear. Porsche 718 / 981 / 991 / Panamera

Code: E19239

Rennline Folding Tow Hook - Rear

Fits
Porsche 981 Boxster / Cayman
Porsche 718 Boxster / Cayman
Porsche 991
Porsche Panamera
Porsche-718 All (17+)
Porsche-981 Boxster S 3.4 (13+)
Porsche-981 Boxster Spyder (15+)
Porsche-981 Cayman (13+)
Porsche-981 Cayman GT4 (15+)
Porsche-981 Cayman S (13+)
Porsche-991 3.4 Carrera (11+)
Porsche-991 3.8 Carrera S (11+)
Porsche-991 GT3 (13-16)
Porsche-991 GT3 Cup (13-16)
Porsche-991 Turbo (13+)
Porsche-991.2 (17+)
Porsche-991.2 GT3 (17+)
Porsche-Panamera All (10+)

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Red "TOW" Graphic
• Go Pro Camera mount compatible (Mount sold Separately)

Note: Pictures may not show actual product.

Rennline Folding Tow Hook. Porsche 911/964/993/996/997/Boxster/Cayman/944T/968

Code: E19208

Rennline Folding Tow Hook.

Fits the front of 964/993/996/997/Boxster/Cayman/944T/968 and the rear of 964/993/964/993/996/997 and 911's with factory screw in reciever
Note: The threads on this screw are the special factory Porsche thread.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours is the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined and chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• Through bolt design - Some hooks on the market have bolts on each side resulting in very little thread contact causing hook failure.
• 300 series stainless steel
• Two Red Tow Stickers included
• Replaceable tow stickers available in several colors.

Note: Pictures may not show actual product.

Rennline Race Hook. UNIVERSAL

Code: E01X

Rennline Race Hook. UNIVERSAL
5, 6, 7, or 8 inch.

Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.

Note: Pictures may not show actual product.

Rennline Rear Tow Hook. Porsche 944 / 924

Code: E69

Rennline Rear Tow Hook

Fits:
Porsche 944 1983-91
Porsche 924 924

Until now, 944 owners have been forced to fabricate their own "regulation" bumper mounted tow hook to be legal for many sanctioning racing series or other organized track events. Rennline's new 944 race tow hook has a 2" diameter opening (required) and can be easily accessed without crawling under the rear of the car, but does not protrude far enough to bruise your shins if you walk too close to the vehicle while in the paddock. Rennline's race tow hook mounts directly to the rear bumper shock using the factory bumper shock bolts and can be installed in minutes. Installation can be completed without removing your factory rear bumper or factory valance.

Each tow hook is manufactured from durable steel, powder coated red, and comes with (2) "tow" stickers.

Note: Pictures may not show actual product.

Zoom in (1)

Rennline Rear Tow Hook/Tie Down Set. Porsche 944 / 924

Code: E6904

Rennline Rear Tow Hook Set.

SET OF 2

Fits:
Porsche 944 1983-91
Porsche 924 924

Until now, 944 owners have been forced to fabricate their own "regulation" bumper mounted tow hook to be legal for many sanctioning racing series or other organized track events. Rennline's new 944 race tow hook has a 2" diameter opening (required) and can be easily accessed without crawling under the rear of the car, but does not protrude far enough to bruise your shins if you walk too close to the vehicle while in the paddock. Rennline's race tow hook mounts directly to the rear bumper shock using the factory bumper shock bolts and can be installed in minutes. Installation can be completed without removing your factory rear bumper or factory valance. Each tow hook is manufactured from durable steel, powder coated red, and comes with (2) "tow" stickers. Rennline's tie-down brackets are made of steel and powder coated red. These brackets are available in three variations, straight, 90 degree and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.

Note: These come in sets of 2

Note: Pictures may not show actual product.

Rennline Safety Sticker and Decal Kit

Code: E30

Rennline Safety Sticker and Decal Kit.

Rennline 34 piece vinyl decal kit fulfill the requirements of race regulations enforced by many race class governing bodies. This kit includes:

(8) Jack Point Decals
(12) Tow Decals
(4) Turn This Way decals
(2) Battery Disconnect Decals
(4) Neutral Safety Stickers
(2) Rennline Decal

Note: Pictures may not show actual product.

Rennline strap style tow hook. Porsche 944 / 968 / 964 / 993 / 996 / 997 / Boxster / Cayman

Code: E308

Rennline strap style tow hook.

Fits
Porsche 944
Porsche 968
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster /Cayman

Product Description

Introducing the latest in Rennline tow hook innovation: The Race Tow Strap. High strength base screw and Polyester strap design. Installs in minutes on most Porsche, BMW, MINI, Audi, or VW with factory screw type tow hook receptacles.
Designed to handle any off-track adventure quickly and reliably with a focus on safety and quality.

&bull: Can fit front or rear
• Aerospace grade 17-4 PH stainless steel base screw
• 100% Polyester strap with embroidered Rennline logo
• Highly visible Red webbing for quick identification
• Strap is UV resistant to protect against discoloration
• Boxed/cross stitched strap for strength and durability
• Triple layered webbing joint folds at high stress point of base screw for additional strength
• Folded strap at high stress attachment point to base screw for added strength
• Meets requirements for most organized race events requiring a 2" ID opening

Zoom in (6) Zoom in (6) Zoom in (6) Zoom in (6) Zoom in (6) Zoom in (6)

Rennline Tow Stickers (Pair)

Code: E33

Rennline Tow Stickers (Pair)

Replacement tow stickers for all Rennline tow hooks. Available in Red, Black, Yellow, Blue, Green, or Grey. Come as a set of two.

NOTE Stickers only, tow hook not included.

Note: Pictures may not show actual product.

Code: E8110

Rennline Universal Screw in Tow Hook Receiver.

Note: Designed for use with screw in tow hooks part numbers E0509, E0609, OR E1309. Screw in tow hooks not included.

This tube receiver can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. This particular mount allows for 7"-10" of adjustability depending which bolt holes are used. These receivers have no finish.

Note: Pictures may not show actual product.

Code: E814

Rennline Universal Screw in Tow Hook Receiver.
Bolt On 90° Adjustable 1-4"

This tube receiver is designed for use with part numbers E85, E86, and E87. It can be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded into the threaded boss. This particular mount allows for 1-4" of adjustability depending which mounting holes are used.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.

Note: Pictures may not show actual product.

Code: E817

Rennline Universal Screw in Tow Hook Receiver.
Bolt On Adjustable 4"-7"

This tube receiver can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. This particular mount allows for 4"-7" of adjustability depending which bolt holes are used. These recievers have no finish.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.

Note: Pictures may not show actual product.

Code: E82

Rennline Universal Screw in Tow Hook Receiver
Flat - Weld or Bolt on

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.

Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.

Code: E83

Rennline Universal Screw in Tow Hook Receiver
90° - Weld or Bolt on

Requires a screw tow hook E1309

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.
Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.