Wiring Harness / Cables

Engine harness wiring loom.



Fits:
Porsche 944 turbo - from 1987

Complete engine Harness for the Porsche 944 turbo

• Female 35 pin connector to DME
• Female 25 pin connector to knock control

Connectors for:
• Diagnosis
• Altitude correction unit (chassis part to be re-used from old harness)
• Reference mark sensor
• Speed sensor
• Cycle valve
• Oxygen sensor
• 4 x injector
• Test socket
• DME connection plug
• Knock sensor
• Idle positioner
• Temp switch turbo charger
• Temp switch NTC2
• Water temp
• Oil press
• Throttle switch
• Airflow sensor

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9516070210

The product you are viewing cross references to these numbers

DME engine wiring harness - Street Sport



Fits:
Porsche 944  - 1982 to 1985 Early dash
For LHD (Left Hand Drive) cars and RHD (Right Hand Drive)

Complete engine harness 

Connectors:

• Female 35 pin connector to DME Motronic ECU
• 4 x Injector
• 9 Pin Connector for 12V+ Wires
• Air Flow Sensor
• Altitude Compensation Switch
• Auxiliary Air Valve
• Dash Connector
• Oil Level Switch
• Oil Pressure Send
• Oil Pressure Warn
• Oxygen Sensor
• Reference Mark Sensor
• Speed Transmitter
• Temperature Sensor
• Throttle Valve Switch
• Water Temperature Sensor
• Water Temperature Send

Materials
TXL Wires (Temperature Rating to +125 C)
Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)
TRW Harness Total Weight - 1.21lbs 
OEM Harness Total Weight - 1.475lbs

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461200206

The product you are viewing cross references to these numbers

DME engine wiring harness - Street Sport

 

Fits:
Porsche 944 2.5ltr  - 1985 to 1988 Late dash
For LHD (Left Hand Drive) cars and RHD (Right Hand Drive)

Complete engine harness 

Connectors:

• Female 35 pin connector to DME Motronic ECU
• 4 x Injector
• Air Flow Sensor
• Altitude Compensation Switch
• Auxiliary Air Valve
• Code Plug
• Diagnosis
• DME Connection Plug
• Firewall 14 Pin Connector
• Idle Positioner
• Oil Level Switch
• Oil Pressure Send
• Oil Pressure Warn
• Oxygen Sensor
• Reference Mark Sensor
• Speed Transmitter
• Temperature Sensor
• Throttle Valve Switch
• Water Temperature Sensor
• Water Temperature Send
• Water Temperature Warn

Materials
TXL Wires (Temperature Rating to +125 C)
Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)
New Rubber Elephant Boot
TRW Street Sport Harness Total Weight - 1.54lbs 
OEM Harness Total Weight - 1.88lbs

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460702101

The product you are viewing cross references to these numbers

Dual fan wiring harness for CSF radiator. Porsche 944

 

Fits:

Porsche 944 2.5ltr / 2.7ltr - 1982 to 1989
Porsche 944S 16V 2.5ltr - 1988 to 1989
Porsche 944 S2 3.0ltr - 1989 to 1991
Porsche 944 turbo - 1985 to 1991

Porsche 944 are notorious for getting extremely hot.

We wanted to make an all-in-one solution that was super easy to install and looked incredible. Sport with our Standalone fusebox that contains two relays to power dual fans. 

The Relay/Fusebox can easily be mounted on the Porsche 944 OEM Battery location. We utilized Porsche 944 Thermal Switch Sensor that is rated to turn on at 70 C. That means the fan will kick on sooner and stay on longer even after you turn off your Porsche 944.  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95160648100

The product you are viewing cross references to these numbers

Engine harness wiring loom.



Fits:
Porsche 944 turbo - up to 1986

Complete engine Harness for the Porsche 944 turbo

• Female 35 pin connector to DME
• Female 25 pin connector to knock control

Connectors for:
• Diagnosis
• Altitude correction unit (chassis part to be re-used from old harness)
• Reference mark sensor
• Speed sensor
• Cycle valve
• Oxygen sensor
• 4 x injector
• Test socket
• DME connection plug
• Knock sensor
• Idle positioner
• Temp switch turbo charger
• Temp switch NTC2
• Water temp
• Oil press
• Throttle switch
• Airflow sensor

Special order made to order parts please allow 2 – 4 weeks

Comes with detailed connection diagram.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9516070210

The product you are viewing cross references to these numbers

Motronic DME connector kit - 35 Pin 



Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1991
Porsche 944 turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Porsche 911 - 1984 to 1989

Connector will fit Bosch units
0 281 200 076
0 281 200 050

Connector List:

• 35 Pin ECU Connector
• Wire Seals
• JPT Terminals
• Connector Screws

Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.

This OEM+ replacement kit will replace the stock ECU Bosch DME connector.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461200207

The product you are viewing cross references to these numbers

Motronic DME connector kit - 55 Pin 



Fits:
Porsche 944 S - 1987 to 1988
Porsche 944  S2- 1989 to 1991

Connector will fit Bosch units
0 281 200 195

Connector List:

• 55 Pin ECU Connector
• Wire Seals
• Terminals
• Connector Screws
  

Suitable for Bosch Motronic
M1.3 / M1.5 / M1.52 / M1.54
MP5.1 / MP5.2 / MP7 / M2.5 / M2.7 /M2.10

Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.

This OEM+ replacement kit will replace the stock ECU Bosch DME connector.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461812405

The product you are viewing cross references to these numbers

O2 sensor engine wiring loom - Normally aspirated engines 



Fits:
Porsche 944 2.5ltr - 1982 to 1985 (late dash)

This Porsche 944 O2 Harness will replace your brittle and old connectors, terminals, wires, and loom

Features:

• The O2 Sensor section of the factory harness connector has been exposed to three decades of high heat cycles and extreme environmental conditions. As a result, the wires and connectors become brittle and broken, which can cause problems with engine performance.
• This OEM+ replacement harness with yellow labels will ensure a cleaner engine bay, using brand-new connectors and wires, and sealed boots. The harness will be routed through the elephant's boot, down the main branch, and into the DME at the passenger's footwell. A full pinout and instruction manual will be provided with the harness.
• TXL Wires (Temperature Rating to +125 C)
• Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460601900

The product you are viewing cross references to these numbers

O2 sensor engine wiring loom - Normally aspirated engines 



Fits:
Porsche 944 - 1982 to 1985 (early dash)

This Porsche 944 O2 Harness will replace your brittle and old connectors, terminals, wires, and loom
Fits 250-23025 Oxygen Sensor

Features:

• The O2 Sensor section of the factory harness connector has been exposed to three decades of high heat cycles and extreme environmental conditions. As a result, the wires and connectors become brittle and broken, which can cause problems with engine performance.
• This OEM+ replacement harness with yellow labels will ensure a cleaner engine bay, using brand-new connectors and wires, and sealed boots. The harness will be routed through the elephant's boot, down the main branch, and into the DME at the passenger's footwell. A full pinout and instruction manual will be provided with the harness.
• TXL Wires (Temperature Rating to +125 C)
• Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)

Wiring harness alternator. 


 
Fits:
Porsche 944 2.5ltr - 1982 to 1985 Early dash cars
For LHD (Left Hand Drive) cars and RHD (Right Hand Drive)

Features:

• 6 GA Motorsport Batter Cable
• 12 GA TXL Wires (Starter Solenoid)
• 18 GA TXL Wires (Alternator Exciter)
• Tin-Plated Battery Lugs on both ends
• TXL Wires (Temperature Rating to +125 C)
• Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94461201501

The product you are viewing cross references to these numbers

Wiring harness fuel injectors. 



Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1989
Porsche 944 turbo - 1986 to 1991

This Porsche 944 Injector Harness  will replace your brittle and old connectors, terminals, wires and loom.
The fuel injector section of the factory harness connector has been exposed to three decades of high heat cycles and extreme environmental conditions. As a result, the wires and connectors become brittle and broken, which can cause problems with engine performance.

This OEM+ replacement harness with yellow labels will ensure a cleaner engine bay, using brand-new connectors and wires, and sealed boots.

The harness will be routed through the elephant's boot, down the main branch, and into the DME at the passenger's footwell. A full pinout and instruction manual will be provided with the harness.

• TXL Wires (Temperature Rating to +125 C)
• Polyethylene Terephthalate (PET) Loom (Temperature Rating to +125 C)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460611201

The product you are viewing cross references to these numbers