Strut Brace

One-Piece Racingline aluminium front strut brace.

Fits
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Racingline
Racingline is the label for an assorted range of high quality strut bars. These CNC milled threaded pieces and laser cut parts ensure extremely accurate adjustments.

Racingline products are available in either polished aluminium or carbon fibre coated. With this strut bar you will get the highest level of technical and optical performance.

Strut braces provide additional stability to the car body. This results in more precise steering and improved directional stability due to reduced torsion of the car body.

Wiechers strut braces are adapted for production vehicles. These are absolutely true to size and made of high quality steel.
We offer strut braces either made of steel vanished red or made of high gloss polished aluminium.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36700

The product you are viewing cross references to these numbers

Brey Krause Carbon Fiber Strut Tower Brace.

For Porsche 964 / 993

Material: Carbon fiber & T-66061 aluminium.
Finish: Carbon fiber & anodized aluminium.
Weight: 1 lb. 8.6 oz.
Models: C2, C4, 993
Installation: Bar attaches to strut towers.
Miscellaneous: Adjustable rod ends allow precise preloading.

For Installation instructions please CLICK HERE

Brey Krause Carbon Fiber Upgrade Kit.

For Porsche 964 / 993

The R-1532 upgrade kit provides a high quality carbon fiber tube bonded to threaded fittings to replace the stainless steel tube assembly of the model R-1530. The upgrade kit only included the carbon fiber tubing, not the ends.

Material: Carbon fiber tube assembly with aluminum fittings.
Finish: Carbon fiber.
Weight: 11 oz.
Models: C2, C4, 993
Installation: Bar attaches to stainless steel rod ends - supplied with R-1530.

Brey Krause Carbon Fiber Strut Tower Brace.

For Porsche 964 / 993 Race Car

Material: Carbon fiber & T-66061 aluminium.
Finish: Carbon fiber & anodized aluminium.
Weight: 1 lb. 4.3 oz.
Models: C2, C4, 993
Installation: Bar attaches to strut towers.
Miscellaneous: Designed for C2, C4 and 993 competition vehicles with aftermarket spherical strut bearings. Raised tube design will clear most fuel cells.

For Installation instructions please CLICK HERE

Brey Krause Strut Tower Brace.

 

For Porsche 964 / 993

Material: Type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 3 lbs. 4 oz.
Models: All C2,C4,993.
Installation: Bar attaches to strut towers.
Miscellaneous: Adjustable rod ends allow precise preloading.
Option: If you don't want to make any compromises on weight or performance, we have developed a series of carbon fiber strut braces and upgrade kits kits that deliver incredible strength to weight properties.

For Installation instructions please CLICK HERE

Ultra Racing Front Strut Bar / Front Tower Bar
Specification: 2 Points



Fits:
Porsche 964 (911) Carrera 2 1989>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

QuickChange strut brace system.



Expandable, quick removal and installation.

Our unique QuickChange™ strut-brace system is available in two configurations and is expandable to grow with your needs. Quick release pins let you remove or reconfigure in minutes.

Expandable – Start with a single-bar strut tower brace and later scale up to a full-blown X-brace, the system is completely up-gradable. Grow or reconfigure your brace to match your changing needs for chassis rigidity, storage capacity, and budget.

Quick Release – Tubes are secured with quick release pins, each held in place by a de-tent ball. Quick Release pins allow fast, tool-less removal for service access or expanded stowage capacity.

Build Quality – Truly awesome appearance matches the functionality. Oversized aluminium tubing has a beefy, stout appearance yet remains lightweight and has a purposeful frosted anodize finish. CNC machined billet aluminium clevis ends are anodized a tasteful burgundy colour.

All configurations are completely bolt-in, no welding required.

QuickChange Strut Brace Video


Start with the single bar configuration, upgraded to the full X-Brace later by simply adding components. No throwaways! Single Bar – The foundation of the system, the single bar connects the strut towers together for reduced flex.



X Brace – Inspired by the chassis braces used on 935 race cars, the X brace increases chassis torsional rigidity. Completely bolt on, it attaches to the camber plates and the front corners of the trunk.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

216221

The product you are viewing cross references to these numbers

Rennline Strut tower brace - 2 POINT.

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Accurate camber setting are a must for any track or performance street car. Adjusting camber from your camber plates usually requires a pry bar in one hand and your wrench in the other, giving you an end result of…… “close enough”. Those days are over. Not only is this the industries first 3 point strut brace for the 964/993, it also has an integrated adjustment point that will allow you to fine tune, then lock your camber settings in a matter of seconds. This feature will eliminate the need to drill and pin your camber plates to insure that they will not move under extreme race conditions. This strut brace is available in both 2 and 3 point configuration and is constructed from aluminum and stainless steel. Note: Will operate with most adjustable camber plates.

This 964/993 Strut Brace can be installed on cars without adjustable camber plates, however the adjustment feature will not be functional. Camber Plates not included.

Note: Pictures may not show actual product.

Rennline Strut tower brace - 3 POINT.

  

Fits:
Porsche 964 1989-94
Porsche 993 1995-98

Accurate camber setting are a must for any track or performance street car. Adjusting camber from your camber plates usually requires a pry bar in one hand and your wrench in the other, giving you an end result of…… “close enough”. Those days are over. Not only is this the industries first 3 point strut brace for the 964/993, it also has an integrated adjustment point that will allow you to fine tune, then lock your camber settings in a matter of seconds. This feature will eliminate the need to drill and pin your camber plates to insure that they will not move under extreme race conditions. This strut brace is available in both 2 and 3 point configuration and is constructed from aluminum and stainless steel. Note: Will operate with most adjustable camber plates.

This 964/993 Strut Brace can be installed on cars without adjustable camber plates, however the adjustment feature will not be functional. Camber Plates not included.

Note: Pictures may not show actual product.

One Piece Steel front strut brace.



Fits
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

This one piece steel Front Strut Brace is finished in red and attaches to the factory strut top mountings on the inner wings.

Strut braces provide additional stability to the car body. This results in more precise steering and improved directional stability due to reduced torsion of the car body.

Wiechers strut braces are adapted for production vehicles. These are absolutely true to size and made of high quality steel.
We offer strut braces either made of steel vanished red or made of high gloss polished aluminum.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

361003

The product you are viewing cross references to these numbers

DesignTek Front Strut Braces Finished in light weight but very strong carbon fibre tubing. Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven car - Increase your driving experience and become one with the road.



Fits:
Porsche 964 C2/C4
Porsche 965 Turbo
Porsche 993 C2 (NOT 993 4WD)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360210964

The product you are viewing cross references to these numbers

Strut Brace in Polished finish.


Fits:
Porsche 964 All
Porsche 993 All

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96434304200

The product you are viewing cross references to these numbers