HID Light Kits

What does HID Stand for?
HID stands for High Intensity Discharge. The term xenon is comes from the type of gas that is found inside the bulb.

The HID system consists of 3 parts
2 Xenon bulbs 2 Electronic ballasts 2 Built-in Igniters (they are inside the ballast).

What advantages are there with HID compared to Halogen Bulbs?
There are many advantages to HID. 1/3 less power consumption . Xenon lamps are only 35 watts. The ballasts only draw 1.2 amps of power! This puts a much lower strain on the cars electrical system. Frees up more power to power other goodies, such as audio equipment 3 times the light output: No halogen bulb can even come close to the output of a normal HID light. More light output if you do Stage 2 Safety and Visibility. More visibility equals more nighttime safety. Much more powerful than halogen, HID allows you to see farther and brighter during nighttime driving. Plus, HID approximates the temperature of sunlight, so objects appear more real.

Installation.... What is involved?
Installation of HID is not very difficult or time consuming. You need some very basic mechanic skills and a little time. Detailed Instructions are included in every kit. Installation for Xenon kits should be fitted by an engineer / auto electictian. In a nutshell, simply insert the HID light in the light housing, find a suitable location for the ballasts and run 1 wire to the bulb connect the factory harness to the ballast.

This HID conversion kit cannot be approved for road
use unless automatic levelling and washing systems are installed.

Winter Offer

For Fitting Instructions Please Click Here

T-LIGHT v3 Porsche 993 High beam LED kit.



Light Emitting Diode (LED) high beam light kit, specially designed for the Porsche 993 with easy installation inside the headlight enclosure. Installation time is 15-20 minutes without the need of special tools.

• 45W H1 LED, 3200 Lumen per bulb, colour: 6500 Kelvin
• Kit contains two LED systems, one for each high beam headlight
• No wire cutting, use the original halogen bulb connectors
• About three times more light output than the halogen bulb, high quality electronics and bulbs, long life
• Richly illustrated installation manual in English
• Plug-and-Play connection with easy revert to halogen if needed
• 2 years warranty

T-LIGHT v3 High Beam is meant for use in conjunction with our T-LIGHT v3 HID kit for the 993 low beams. It is also possible to use with our previous T-LIGHT v2 kit, but we recommend to upgrade to v3 if possible.

We do not recommend to use this LED kit in the Porsche 993 Low beam lights. The light output pattern using these LED bulbs will be wrong.

We have a bundle product with both the LED and HID for a full upgrade of the Porsche 993 headlights.

Current consumption and heat is lower than the original H1 halogen bulbs. Normal incandescent halogen bulbs have a light output of 1100 to 1300 Lumen.

A short note on light colour temperature

The T-LIGHT LED high beam has a light colour temperature of 6500K. Using a LED system with a more yellow colour would have lowered the light output, and raised the price. We therefore chose to go for the standard 6500K version. We like the whiter shade of the high beams. Normally, only the driver see these lights.

With respect to light colour, we are more concerned with the look of the low beams. These are the ones other people see, and most of our customers don't want these to be too white or blueish. Our 4300K Low Beam kit is therefore by far the most popular, which is the same colour as used in the Porsche Litronic system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

11280

The product you are viewing cross references to these numbers

T-LIGHT v3 Porsche 993 Low Beam HID kit 4300K



High Intensity Discharge (xenon) low beam light kit, specially designed for the Porsche 993 with easy installation inside the headlight enclosure. Installation time is 15-20 minutes without the need of special tools.

• 55W H1 HID/xenon low beam, colour: 4300K
• AC ballast output for constant light colour and long service life
• Kit contains two HID systems, one for each low beam headlight
• No wire cutting, T-Light use the original halogen bulb connectors.
• Three times the light output of halogen bulbs, high quality (Philips OEM) electronics and bulbs, long life
• Richly illustrated installation manual in English
• Ba9s LED bulbs for front park/marker light with • matching colour
• Very quick installation inside the headlight housing (bolt-on)
• Plug-and-Play connection with easy revert to halogen if needed
• 2 years warranty

4300K light colour resembles the colour of the original Porsche Litronic HID lights. 6000K has a bit more blue tint to the light. Light intensity is the same in both colours.

Our new T-LIGHT v3 kit has 30-40% increased brightness compared to our previous HID kit. However, the difference depends on several factors, especially the ageing of the HID bulbs.

Current consumption and heat emission is lower than normal halogen lamps.

We have tried a lot of LED kits in the 993 low beam projector lamp, and none will come near to using HID lamps, which has a omnidirectional light output. LED's work OK in open reflector designs, but not in this kind of lamp construction, they produce the wrong light output pattern, and does not produce the light intensity as HID bulbs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

11210

The product you are viewing cross references to these numbers

T-LIGHT v3 Porsche 993 Low Beam HID kit 6000K



High Intensity Discharge (xenon) low beam light kit, specially designed for the Porsche 993 with easy installation inside the headlight enclosure. Installation time is 15-20 minutes without the need of special tools.

• 55W H1 HID/xenon low beam, colour: 6000K
• AC ballast output for constant light colour and long service life
• Kit contains two HID systems, one for each low beam headlight
• No wire cutting, T-Light use the original halogen bulb connectors.
• Three times the light output of halogen bulbs, high quality (Philips OEM) electronics and bulbs, long life
• Richly illustrated installation manual in English
• Ba9s LED bulbs for front park/marker light with • matching colour
• Very quick installation inside the headlight housing (bolt-on)
• Plug-and-Play connection with easy revert to halogen if needed
• 2 years warranty

4300K light colour resembles the colour of the original Porsche Litronic HID lights. 6000K has a bit more blue tint to the light. Light intensity is the same in both colours.

Our new T-LIGHT v3 kit has 30-40% increased brightness compared to our previous HID kit. However, the difference depends on several factors, especially the ageing of the HID bulbs.

Current consumption and heat emission is lower than normal halogen lamps.

We have tried a lot of LED kits in the 993 low beam projector lamp, and none will come near to using HID lamps, which has a omnidirectional light output. LED's work OK in open reflector designs, but not in this kind of lamp construction, they produce the wrong light output pattern, and does not produce the light intensity as HID bulbs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

11211

The product you are viewing cross references to these numbers