Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.com/images/schemaLogo.png https://www.design911.com/images/schemaLogo.png +443456003478 https://www.design911.com Facebook Instagram

Brey-Krause Harness Mounting

Refine by Car Type
DISPLAYING 1 to 15 (of 15 products)
Brey Krause Outside Lap Belt Mounts. Porsche 911 / Boxster / Cayman
Code: R-9003
Brey Krause PAIR of Outside Lap Belt Mounts.


breykrause

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 6oz.
Models: All Porsche sports cars.
Installation: Secures snap-in lap belts to outside seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part R-9001 for inside belt mount.

For Installation instructions please CLICK HERE

Best Price
Brey Krause Seat Brace - Fixed Back Composite Seats
Code: R-9020
Brey Krause Seat Brace - Fixed Back Composite Seats.

breykrause

The "adjustable seat brace" is engineered to extend the protection of your roll cage to the back of your seat. The Brey-Krause adjustable seat brace is designed to fit 1-3/4", 1-5/8" and 1-1/2" diameter roll bars and all BK harness mount bars. The mounting bracket is secured with bolts through two holes which are drilled through the roll bar tubing. Once bolted to the roll bar, the seat brace can be adjusted fore, aft, up, or down. This seat brace is designed for one piece (i.e. non-reclining) racing seats. The R-9019 is recommended for Porsche reclining seats. Mounting brackets are not included.

Material: 6061-T6 aluminum with ½" thick layer of high density foam.
Finish: Powder Coated Wrinkle Black
Weight: 3 Lbs.
Installation: Attaches to roll bars or Brey-Krause harness mount bars.
Miscellaneous: Foam firmly cushions the back of the seat against the support assembly.
Options:

This part requires the use of one of the following:

Roll Bars and Roll Cages:

R-9021 Bolt-On - Seat Brace Mounting Kit - Roll Bar/Roll Cage tubing size 1 1/2" to 1 3/4"
R-9023 Bolt-On - Seat Brace Mounting Kit - Roll Bar/Roll Cage tubing size 1 1/2"
R-9022 Weld-On - Seat Brace Mounting Kit - Roll Bar/Roll Cage tubing size 1 3/4"
R-9025 Weld-On - Seat Brace Mounting Kit - Roll Bar/Roll Cage tubing size 1 1/2"

BK Harness Mount Bars and Trusses:
R-9024 Seat Brace Mounting Kit - All BK Harness Mount Bars with Integrated Brackets
R-9017 Seat Brace Mounting Kit - For R-1035 Harness Truss (Porsche 996/997)
R-9018 Seat Brace Mounting Kit - For R-1025 Harness Truss (Porsche 911 '74-'98)
Best Price
Brey Krause Short Inside Lap Belt Mounts. Porsche 911 / Boxster / Cayman
Code: R-9004
Brey Krause PAIR of Short Inside Lap Belt Mounts.

breykrause

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.

For Installation instructions please CLICK HERE
Best Price
Brey Krause Harness Mount Bar / Truss GT3 Adapter Kit. Porsche 996 / 997 GT2 and GT3
Code: R-1031
Brey Krause Harness Mount Bar / Truss GT3 Adapter Kit.


breykrause

This kit adapts the R-1030 and R-1035 harness mounts to fit in the Porsche 996/997 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points.

This kit bolts in to your GT2 or GT3 with no drilling, cutting or fabricating necessary.

Material: 304 stainless steel
Finish: Powder-coated in black wrinkle finish.
Weight: 5 lbs.
Models: Porsche 996/997 GT2 & GT3
Installation: Kit replaces the forward support tubes included in original kit.
Miscellaneous: Alternate bracket available for certain power seats upon request

Best Price
Brey Krause Harness Mount Bar Hardware Kit for R-1030. Porsche 996 / 997
Code: R-1030-HW
Brey Krause harness mount bar replacement hardware kit for R-1030 Brey Krause harness mount bar.


breykrause

Best Price
Brey Krause Harness Mount Bar. Porsche 996 / 997
Code: R-1030
Brey Krause Harness Mount Bar.

breykrause

Fits:
Porsche 996 / 997 Coupe

Material: Type 304, stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 16lbs. 7oz.
Models: 996/997 Coupe NOTE: For GT-3 and GT-2 applications use R-1031 Adapter
Installation: Bar attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. For models with Bose rear deck mounted sound system, use model R-1029 instead of model R-1030.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers. Includes proper provisions for Seat Back Brace.

For Installation instructions please CLICK HERE

The 996/997 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.

Accessories:
Replacement Hardware: R-1030-HW
Seat Back Brace: R-9019 & R-9020
Best Price
Brey Krause Harness Mount Truss. Porsche 996 / 997
Code: R-1029
Brey Krause Harness Mount Truss.

breykrause

Fits:
Porsche 996 / 997 Cabriolet
Porsche 996 / 997 Coupe with BOSE Speaker Box

Material: Type 304, stainless steel
Finish: Powder coated in durable black wrinkle-finish
Weight: 16 lbs
Models: 996/997 Cabriolet or 997 coupes with the Bose speaker box
Installation: Bar attaches to seat belt mounts & seat track hardware.
Miscellaneous: Bar is designed to allow enough seat travel for tall drivers. Include provisions for Seat Back Brace.

For Installation instructions please CLICK HERE

The 996/997 Cabriolet harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.

Certain power seats may interfere with installation of floor brackets. Please contact Brey-Krause for alternate part if necessary.

The Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles. Tensile tests performed by an independent lab.

Accessories:
Replacement Hardware: R-1029-HW
Seat Back Brace: R-9019 & R-9020
Best Price
Brey Krause Harness Mount Truss. Porsche 996 / 997 Coupe
Code: R-1035
Brey Krause Harness Mount Truss.

breykrause

Fits:
Porsche 996 / 997 Coupe

Material: 6061 T-6 aluminium skeleton, type 304 stainless steel strut mount.
Finish: Anodized aluminium skeleton. Strut mount powdercoated in black wrinkle finish.
Weight: 15.5 lbs.
Models: 996/997 Coupe - NOTE: Please use part R-1029 for 997 Cabriolet.
Installation: Bar attaches to rear strut tops & seat belt mounting points and is easy to remove/reinstall. For the 996/997 GT2 & GT3, the R-1031 adaptor kit must be used. For models with Bose rear deck mounted sound system, use model R-1029 instead of model R-1035.

For Installation instructions please CLICK HERE

This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996/997 coupe. The new R-1035 features water-jet machined aluminium construction much like our R-1025 harness truss. Like all Brey-Krause harness mounts, the R-1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.

The R-1035 been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.
Best Price
Brey Krause Long Inside Lap Belt Mounts. Porsche 911 / Boxster / Cayman
Code: R-9001
Brey Krause PAIR of Long Inside Lap Belt Mounts.

breykrause

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 6oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt.

For Installation instructions please CLICK HERE
Best Price
Brey Krause Passenger Harness Mount Bar. Porsche 996/997 GT3 Cup Cars
Code: R-1040
Brey Krause Passenger Harness Mount Bar.

breykrause

Fits:
Porsche 996 GT3 Cup Cars 2004-12

The R-1040 been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.

Material: 6061 T6 Aluminum
Finish: Clear anodized
Weight: appox. 1.75lbs
Models: (04-12) GT3 Cup Cars
Installation: Bolts to Factory Cage
Miscellaneous: No permanent modification to the car. Allows for proper installation of passenger shoulder harness. Kit includes shaft collar to prevent harness slippage.

For Installation instructions please CLICK HERE
Best Price
Brey Krause Seat Brace - Factory Reclining Seats
Code: R-9019::1
Brey Krause Seat Brace - Factory Reclining Seats

breykrause

Engineered to extend the protection of Brey-Krause harness mount bars to the back of your seat, the seat support assembly is constructed from 6061-T6 aluminum with a ½" thick layer of high density foam. The foam firmly cushions the back of the seat against the support assembly. This seat brace is designed for conventional factory reclining seats. The R-9020 seat brace is recommended for cars with one-piece racing seats.

Material: 6061-T6 aluminum with ½" thick layer of high density foam.
Finish: Powder-coated wrinkle black
Weight: 2 lbs.
Models: R-9019 seat brace will work with the bolt-on and weld-on roll cage mounting brackets: R-9021, R-9022, and R-9023.
Miscellaneous: Foam firmly cushions the back of the seat against the support assembly. Support can be drilled and through bolted to aftermarket seats if desired. Brackets are sold separately.

Related Parts:
R-9020 Seat Brace - Fixed Back Composite Seats
Best Price
Brey Krause Seat Floor Mount Adapter With Integrated Sub Strap Mount. Porsche 996 / 997 / Boxster / Cayman
Code: R-9044
Brey Krause Seat Floor Mount Adapter with Integrated Sub Strap Mount - R-907X Series Seat Mounting Brackets.

breykrause

Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: Type 304 stainless steel
Finish: Satin finish
Weight: 4 lbs.
Models: Fits 996/997/986/987
Installation: Attaches to driver or passenger side. All necessary hardware included (grade 10.9 M8 bolts as recommended by F.I.A.)
Miscellaneous: Seat brackets must be purchased separately - see BK R-907X series side mount brackets.

For Installation instructions please CLICK HERE


Capitalize on Brey-Krause's innovative engineering with this race seat mounting option for 996/997/986/987/Cayman Porsches.

The R-9044 offers a simple installation process combined with significant adjustment flexibility. The assembly mounts to the floor and places the seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see BK R-907X series brackets).

The entire assembly (including race seat) can be easily installed and removed as a single unit for race events.

Related Items:
R-2044 - Extinguisher Mount

Side Mount Brackets for Sparco Seats
R-9071 - Sparco Evo, Pro 2000
R-9072 - Sparco Evo, Pro 2000
R-9073 - Sparco Evo 2
R-9074 - Sparco Evo 2
R-9761 - Sparco Evo 2 Plus
R-9762 - Sparco Evo 2 Plus
R-9075 - Sparco Evo 2 US
R-9076 - Sparco Evo 2 US

Side Mount Bracket for Recaro Seats
R-9075 - Recaro Pole Position, SPG XL
R-9076 - Recaro Pole Position, SPG XL
R-9755 - Recaro SPA, SPG, Pro HANS
R-9756 - Recaro SPA, SPG, Pro HANS

Side Mounts for OMP Seats
R-9751 - OMP HTE
R-9752 - OMP HTE
Best Price
Brey Krause Sub Strap Mount. Porsche 996 / 986 Boxster
Code: R-9030
Brey Krause Sub Strap Mount.


breykrause  


Fits:
Porsche 996 1999-04 Manual Sliders
Porsche 986 Boxster 1997-04 Manual Sliders

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997 and Boxster
Installation: Attaches to R-907X series side mounts.
Miscellaneous: This mount works with the R-907X series side mount brackets in conjunction with factory non-power 996/997/Boxster sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-907X Side Mount Brackets
R-2030 Fire Extinguisher Mount

Best Price
Brey Krause Sub Strap Mount. Porsche 996 / 997 / 986/987 Boxster
Code: R-9031
Brey Krause Anti-Sub Strap Mount for the R-908X Series Side Mounts.


breykrause

Material: 1.5" x 1" x .125" Wall Carbon Steel Tubing
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 2.35 lbs.

Models: Fits Porsche 996/997 and 986/987 Boxster

Installation: Intended to be used when mounting the GT3 seat directly to the floor with the R-908x series side mounts and the R-9042 side mount floor adapter.

Miscellaneous: Low profile design. Fire extinguisher mount not available.

elated Parts:
R-9042 Seat Floor Mount Adapter

Best Price
Brey Krause Sub Strap Mount. Porsche 996 / 997 / Boxster / Cayman
Code: R-9033
Brey Krause Sub Strap Mount.

breykrause

Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997, Cayman, and Boxster
Installation: Attaches to R-9060, R-9063, R-9067 side mounts
Miscellaneous: This mount works with the R-9060, R-9063, R-9067 side mount brackets in conjunction with aftermarket sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-9060 Side Mount Brackets for MOMO Super Cup (for Sparco sliders)
R-9063 Side Mount Brackets for Recaro Profi SPG, Recaro Profi SPA, Recaro Pro Racer HANS, Recaro Pro Racer HANS SPA - (fits Recaro Slider Part 0.70.9NT)
R-9067 Side Mount Brackets for Recaro SPA, SPG, and Pro Racer HANS Seats
R-2030 Fire Extinguisher Mount - Boxster & 996/997
Best Price
DISPLAYING 1 to 15 (of 15 products)
You may also like
Popular Models