Powerflex Black Series Bushes

Powerflex Black Series Front Track control arm caster offset outer bush uses our usual 95A shore material combined with an offset bore sleeve to allow up to 0.4° of Caster increase from OE, allowing for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain.

Sold as a pair (both arms)

OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053

Fits:
Fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802G.

Diagram ref no 2

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-502GBLK

The product you are viewing cross references to these numbers

Powerflex Black Series Front track control arm outer bush.
Sold as a pair (both arms)

OEM Part Number: 997.341.244.00
OEM Part Number: 996.341.341.08

Fits:
Porsche 997 inc. Turbo
Porsche 911 991 (2012 - 2019)
Porsche 981 Boxster/Cayman (2012 - 2016)
Porsche 982 (718) Boxster/Cayman (2016 on)
Porsche 987 Boxster (2005-2012)
Porsche 987C Cayman (2005 - 2012)


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-804BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Lower Arm Outer Bush "Caster Adjustable"

Front control arm outer bush comes with a lightweight aluminium adjustable sleeve allowing on-car caster adjustment, again in our unique polyurethane bushes.



Set of 2 for TWO lower arms.
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 987 Boxster 2006>>
Porsche 987C Cayman 2005>>
Porsche 997 2006>>

Please click 'Zoom in' to view the diagram.
Diagram re No 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-802BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Lower Arm Rear Bush "Camber Adjustable"

Front control arm inner bush gives the camber adjustment with its durable stainless steel adjustable sleeve which runs in our unique grease retaining polyurethane bush.

Set of 2 for TWO lower arms.
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 987 Boxster 2006>>
Porsche 987C Cayman 2005>>
Porsche 997 2006>>

Please click 'Zoom in' to view the diagram.
Diagram re No 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-801BLK

The product you are viewing cross references to these numbers

Powerflex Black Series Stabilizer Bar Bush Front.



OEM Part Number: 997 343 701 08 PASM Bar

OEM Part Number: 996 343 792 17 Bush

Size: 25mm

Fits:
Porsche 986 Boxster S 3.2L 2000>> Cars with Sport-type chassis
Porsche 987.1 Boxster 2005-08 Cars with standard chassis and Manual Transmission
Porsche 987.1 Boxster / S 2005-08 Cars with PASM (electronic damper control)
Porsche 987.2 Boxster 2009-12
Porsche 987C.1 Cayman 2005-08
Porsche 987C.2 Cayman 2009-12
Porsche 996 TARGA 2002>> Cars with Sport-type Chassis (M030) and Tiptronic Transmission (M249)
Porsche 997.1 C2 CABRIO / COUPE 2005-08 Cars with Standard Chassis (I029) and 6-speed manual transmission (I480)
Porsche 997.1 C2S COUPE 2005-08 Cars with Sport-type Chassis (I030)
Porsche 997.1 C2/C2S COUPE / CABRIO 2005-08 Cars with PASM (electronic damper control) (I475)
Porsche 997.2 C2 COUPE / CABRIO 2009-12 Cars with Standard Chassis (I029) and PDK Transmission (I250)
Porsche 997.2 C2/C2S COUPE 2009-12 Cars with Sport-Type Chassis (I030)
Porsche 997.2 C2/C2S COUPE/CABRIO 2009-12 Cars with PASM (electronic damper control) (I475)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-501-25BLK

The product you are viewing cross references to these numbers

Track control arm and bush kit Black series

PACK OF 2

OEM Part Number: 98133105301
OEM Part Number: 99733104180
OEM Part Number: 99634105318



We're excited to introduce our new range of complete replacement Track Control Arm and Bush Kits for a number of Porsche models including 911 996, 997, 991, and Boxster / Cayman 718, 981, 986, 987.

Fits:
FRONT Diagram reference 2F
Porsche 997 GT2, GT3 & GT3RS
Porsche 986 Boxster (1997-2004)
Porsche 996 (1997-2005)

REAR Diagram reference 5R
Porsche 997 GT2, GT3 & GT3RS
Porsche 997 inc. Turbo
Porsche 718 Boxster/Cayman
Porsche 981 Boxster/Cayman
Porsche 986 Boxster (1997-2004)
Porsche 987 Boxster (2005-2012)
Porsche 987C Cayman (2005 - 2012)
Porsche 996 (1997-2005)


CONTENTS (parts per pack):

2 x Cast Aluminium Track Control Arms
Pre-assembled parts:
2 x Outer Bushes
2 x Inner Bushes
2 x Short Stainless Steel Sleeves
2 x Long Stainless Steel Sleeves
2 x Ball Joint Nuts

Partnering with Chassis Technology Europe (CTE), a specialist in the manufacture of suspension and steering parts, we can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a 'fit and forget' product, designed specifically for high performance and convenience of use with the added peace of mind of our Lifetime Warranty *.

Simply remove the old arm and refit!

Both Adjustable and Non-Adjustable bush options are available to suit differing driving and performance requirements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PF57K-1001BLK

The product you are viewing cross references to these numbers

Track control arm and bush kit Black series



PACK OF 2

OEM Part Number: 99134105304
OEM Part Number: 99734105304
OEM Part Number: 99134105321

We're excited to introduce our new range of complete replacement Track Control Arm and Bush Kits for a number of Porsche models including 911 996, 997, 991, and Boxster / Cayman 718, 981, 986, 987.

Fits:
FRONT Diagram reference 2F
Porsche 997 inc. Turbo
Porsche 991 (2012-2019)
Porsche 718 Boxster/Cayman
Porsche 981 Boxster/Cayman
Porsche 987 Boxster (2005-2012)
Porsche 987C Cayman (2005-2012)


CONTENTS (parts per pack):

2 x Cast Aluminium Track Control Arms
Pre-assembled parts:
2 x Outer Bushes
2 x Inner Bushes
2 x Short Stainless Steel Sleeves
2 x Long Stainless Steel Sleeves
2 x Ball Joint Nuts


Partnering with Chassis Technology Europe (CTE), a specialist in the manufacture of suspension and steering parts, we can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a 'fit and forget' product, designed specifically for high performance and convenience of use with the added peace of mind of our Lifetime Warranty *.

Simply remove the old arm and refit!

Both Adjustable and Non-Adjustable bush options are available to suit differing driving and performance requirements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PF57K-1002BLK

The product you are viewing cross references to these numbers

PowerFlex Black Series Upper Link Arm OUTER Bushes Rear

Replacement motorsport Upper Link Arm OUTER Rear in polyurethane.

This kit contains a set of 4 bushes for upper rear link arms:
4 x PFR57508 Outer bushes

Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 996 1998-04

Fits to No 8 on the diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-508BLK

The product you are viewing cross references to these numbers