Brey-Krause Harness Mounting

Brey Krause PAIR of Outside Lap Belt Mounts.

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 6oz.
Models: All Porsche sports cars.
Installation: Secures snap-in lap belts to outside seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part R-9001 for inside belt mount.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Short Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.

For Installation instructions please CLICK HERE

Brey Krause Clip-In Lap Belt Mounting Kit for OEM Sliders.



Fits:
Porsche 991 / 981 / 997 and 987 models with OEM manual sliders

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 991, 981, 997, and 987 models with OEM manual sliders.
Installation: Secures clip-in lap belts to factory tunnel side (inside) seat belt mounting point on Porsche OEM 991, 981, 997, 987 manual sliders.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Long Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 6oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt.

For Installation instructions please CLICK HERE

Brey Krause Seat Floor Mount Adapter with Integrated Sub Strap Mount - R-907X Series Seat Mounting Brackets.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: Type 304 stainless steel
Finish: Satin finish
Weight: 4 lbs.
Models: Fits 996/997/986/987
Installation: Attaches to driver or passenger side. All necessary hardware included (grade 10.9 M8 bolts as recommended by F.I.A.)
Miscellaneous: Seat brackets must be purchased separately - see BK R-907X series side mount brackets.

For Installation instructions please CLICK HERE


Capitalize on Brey-Krause's innovative engineering with this race seat mounting option for 996/997/986/987/Cayman Porsches.

The R-9044 offers a simple installation process combined with significant adjustment flexibility. The assembly mounts to the floor and places the seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see BK R-907X series brackets).

The entire assembly (including race seat) can be easily installed and removed as a single unit for race events.

Related Items:
R-2044 - Extinguisher Mount

Side Mount Brackets for Sparco Seats
R-9071 - Sparco Evo, Pro 2000
R-9072 - Sparco Evo, Pro 2000
R-9073 - Sparco Evo 2
R-9074 - Sparco Evo 2
R-9761 - Sparco Evo 2 Plus
R-9762 - Sparco Evo 2 Plus
R-9075 - Sparco Evo 2 US
R-9076 - Sparco Evo 2 US

Side Mount Bracket for Recaro Seats
R-9075 - Recaro Pole Position, SPG XL
R-9076 - Recaro Pole Position, SPG XL
R-9755 - Recaro SPA, SPG, Pro HANS
R-9756 - Recaro SPA, SPG, Pro HANS

Side Mounts for OMP Seats
R-9751 - OMP HTE
R-9752 - OMP HTE

Brey Krause Sub Strap Mount Drivers Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Driver Side

Material: Stainless Steel Tubing
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (driver side).
Installation: Attaches to driver side seat assembly.
Miscellaneous: Attaches to driver side seat assembly using factory mounting points. This mount bar is used with Brey-Krause's R-2032 fire extinguisher mount.

For Installation instructions please CLICK HERE

Related Parts:
R-2032 Fire Extinguisher Mount

Brey krause sub strap mount for adjustable BK mount system 
for seats 425mm or wider at the front mounting points

Fits:
Porsche 991 / 981 / 997 and 987 models with R-9052 Side Mounts

Material: 304 series stainless steel steel tubing
Finish: brushed stainless finish
Weight: 2 lbs.
Models: Mounts to all Brey Krause variable width side mounts

Installation: for seats 425mm or wider at the front mount points

Related Parts:
R-9052 Side Mounts For OEM 991,981,997,987 Sliders
R-9006 Clip-In Inside Lap Belt Mounts
R-9003 Clip-In Outside Lap Belt Mounts

Brey Krause Sub Strap Mount for BK Side Mount Systems. For Mounting a Sub Strap to R-925X Series & R-9052 Side Mounts.
for seats up to 426mm wide at the front mount points.



Fits:
Porsche 991 / 981 / 997 and 987 models with R-9052 Side Mounts

Material: 304 series stainless steel steel tubing
Finish: brushed stainless finish
Weight: 2 lbs.
Models: R-9052 Side Mounts
Installation: R-9052 Porsche 991, 981, 997, 987 Side Mounts integrated mounting points.
Miscellaneous: For seats up to 426mm wide at the front mount points. For seats over 425mm use the R-9258 sub strap mount.

For Installation instructions please CLICK HERE

Related Parts:
Porsche
R-9052 Side Mounts For OEM 991,981,997,987 Sliders
R-9006 Clip-In Inside Lap Belt Mounts
R-9003 Clip-In Outside Lap Belt Mounts

Brey Krause Sub Strap Mount Passenger Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Passenger Side

Material: Stainless steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (passenger side)
Installation: Attaches to passenger seat assembly
Miscellaneous: Attaches to passenger seat assembly using factory mounting points

For Installation instructions please CLICK HERE

Brey Krause Sub Strap Mount.

  

Fits:
Porsche 996 1999-04 Manual Sliders
Porsche 986 Boxster 1997-04 Manual Sliders

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997 and Boxster
Installation: Attaches to R-907X series side mounts.
Miscellaneous: This mount works with the R-907X series side mount brackets in conjunction with factory non-power 996/997/Boxster sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-907X Side Mount Brackets
R-2030 Fire Extinguisher Mount

Brey Krause Anti-Sub Strap Mount for the R-908X Series Side Mounts.

Material: 1.5" x 1" x .125" Wall Carbon Steel Tubing
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 2.35 lbs.

Models: Fits Porsche 996/997 and 986/987 Boxster

Installation: Intended to be used when mounting the GT3 seat directly to the floor with the R-908x series side mounts and the R-9042 side mount floor adapter.

Miscellaneous: Low profile design. Fire extinguisher mount not available.

elated Parts:
R-9042 Seat Floor Mount Adapter

Brey Krause Sub Strap Mount.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997, Cayman, and Boxster
Installation: Attaches to R-9060, R-9063, R-9067 side mounts
Miscellaneous: This mount works with the R-9060, R-9063, R-9067 side mount brackets in conjunction with aftermarket sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-9060 Side Mount Brackets for MOMO Super Cup (for Sparco sliders)
R-9063 Side Mount Brackets for Recaro Profi SPG, Recaro Profi SPA, Recaro Pro Racer HANS, Recaro Pro Racer HANS SPA - (fits Recaro Slider Part 0.70.9NT)
R-9067 Side Mount Brackets for Recaro SPA, SPG, and Pro Racer HANS Seats
R-2030 Fire Extinguisher Mount - Boxster & 996/997