Sport & Track Seats

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044779

The product you are viewing cross references to these numbers

Adjustable lumbar support lightweight bucket seat. 
Sold each - One per seat

Fits:
Porsche 718 Boxster / Cayman - 2017 Onwards
Porsche 991  - 2019 to 2019
Porsche 992 - 2019 Onwards
Porsche 918 Spyder- 2014 to 2016

The incredible Lightweight Bucket Seats from Porsche adorn many vehicles from the 918 to the GT3, GT2, GT4, T and many other models if so equipped. 

We created this adjustable lumbar support for our vehicles out of necessity. Not only for the driver but the passenger who agreed to that 6 hour journey as our co-pilot. Typically these are quite comfortable seats but on longer journeys, a little lumbar support goes a long way to comfort the back of you and your co-pilot. 

These install in a minute for each side, adjustable for height (lower back, small of back, etc)

The air bladder is adjustable via a simple and lightweight ball pump and once the desired support is obtained, the ball pump can be removed and the hose and check valve tucked into the seat for an invisible install. Or just keep the ball for adjustment at anytime.

BBi Autosport Seat Base and Slider Kit. Compatible with all Porsche 996/997/987/981/991 models PRICE IS EACH




Options:
•   14-3/4" ¬(375mm) to 17-1/2" (445mm) width adjustments (standard side mounts)
•   16"¬(407mm) to 18-3/4"(476mm) width adjustments (optional wide side mounts)

The BBi Autosport race spec seat mounts are a direct bolt into the factory mount location for a hassle free, easy installation for your competition race seat. The BBi Autosport Seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands and offers an integrated 5 and 6-point sub belt mounting location. The wide range of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125" (1/8") carbon steel with no welds to maximize strength and stiffness. All mounts are powder coated with a wrinkle black base and satin black sides.

Features:

•   Precision CNC laser cut and bent from one piece of 1/8" 3mm carbon steel (base & side mounts)
•   Multi way adjustability
•   High strength sliders, mounts to base with 4 bolts per slider
•   Integrated 5 and 6-point sub belt mounting locations
•   Stylish design with laser cut BBi logo and durable satin black Powdercoat finish
•   No modifications to vehicle or any seat mount components are required for installation
•   Uniquely designed for Porsche vehicles for the best possible fitment
•   Mounts to factory bolt locations with precise factory fitment
•   Fits all major FIA/SFI approved seats up to 17"

Grille elements for 3D-printed Bucket seat centre panel.
3-parts

"Grille elements in Black, 9820447898YR"

"Grille elements in Guards Red, 98204478984A"

"Grille elements in Racing Yellow, 9820447891S1"

Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982044789

The product you are viewing cross references to these numbers

Heavy Duty SEAT SIDE BRACKETS



Left side seat brackets set of 2. for one seat. Heavy duty range with seat belt fixing point.

Select Left OR Right

These sports seats brackets are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Note: The distance from the centre of the top hole to the bottom one (as per photo) is 28.5 cm

Seat Fixing Adaptors - Set of 2
For one seat. Fits left or right hand side.
To be used with seat runners part number 99652188800



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 996 1998-05
Porsche 997 2005>>
Porsche 987 C Cayman 2007>>

Universal seat side brackets - Standard - WITHOUT Seat belt fixing point



Side seat brackets set of 2. For one seat. standard range without seat belt fixing point.

These sports seats mounts are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Please visit the image gallery of the product to see all measurements of mounting points.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99652100000

The product you are viewing cross references to these numbers

Seat Sliders - Left or right.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9975214

The product you are viewing cross references to these numbers

Seat Sliders - Left or right.



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 996 1998-05
Porsche 996 Turbo
Porsche 997 2005>>
Porsche 997 Turbo
Porsche Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9975214

The product you are viewing cross references to these numbers

Seat sliders universal.



Please visit image gallery to see all bolt on points measurements.

These seat sliders are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

Fitting points:
- 40cm between rails (from bolt hole to bolt hole)
- 25cm min - 32cm max between bolt holes on single rail

Fit:
Porsche 911 1974-89
Porsche 944 1982-91
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 928 1978-95
Porsche 968 1992-95

For Boxster 986/987 and 996/997 and Cayman models you will need Part No.99652100005 for each seat.

May require some drilling or modification before fitting. Fits left or right side.

Price is each.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99652188800

The product you are viewing cross references to these numbers

Track Bucket Sports Seat - DTX RECLINE



Fit most 911's, 996, Boxster, 997, Cayman

Light weight carbon fibre bucket seats with reclining back rest and removable back and bottom pads.

This seat is available in following materials:
Leather, Alcantara, Leather (outer) & Alcantara (inner).

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting

To view more detailed pictures please CLICK HERE

- These seats come complete with bottom sliders and side brackets. You will need to order extra
Code: SB017DR (LEFT SEAT) and SB017PA (RIGHT SEAT) for seat fixing adaptors for 986/996/997/987/CAYMAN.

Price is per seat.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99978091

The product you are viewing cross references to these numbers