Brey-Krause Harness Mounting

Brey Krause PAIR of Outside Lap Belt Mounts.

Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin finish stainless.
Weight: 6oz.
Models: All Porsche sports cars.
Installation: Secures snap-in lap belts to outside seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part R-9001 for inside belt mount.

For Installation instructions please CLICK HERE

Brey Krause PAIR of Short Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.

For Installation instructions please CLICK HERE

Brey Krause Clip-In Lap Belt Mounting Kit for OEM Sliders.



Fits:
Porsche 991 / 981 / 997 and 987 models with OEM manual sliders

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 991, 981, 997, and 987 models with OEM manual sliders.
Installation: Secures clip-in lap belts to factory tunnel side (inside) seat belt mounting point on Porsche OEM 991, 981, 997, 987 manual sliders.

For Installation instructions please CLICK HERE

Brey Krause Harness Mount Truss.



Fits:
Porsche 987 Cayman 2005-12

Material: 6061-T6 aluminium skeleton and reinforcing bar. Type 304 stainless steel brackets.
Finish: Clear anodized aluminium with satin stainless mounting brackets.
Weight: 9.9 lbs.
Models: Cayman (including S, R, Club Sport and Black Edition) Coupes '06 - '12
Installation: Bar attaches to factory mounting points in "B" pillars.
Miscellaneous: Harness Truss is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the "B" pillars to easily remove and remount the bar in minutes. This Harness Truss allows factory seat belts to be used in conjunction with harnesses.

For Installation instructions please CLICK HERE

Brey-Krause's new Cayman Harness Truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The unit is made of aluminium and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 is easy to install and remove, utilizing existing factory mounting points.

The lattice is precision water-jet machined. It has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Administration DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

Note: Powder-coated R-1045 shown is custom

Brey Krause PAIR of Long Inside Lap Belt Mounts.



Fits:
Porsche 911 All models
Porsche 986/987/981 Boxster all models
Porsche 987/981 Cayman all models

Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 6oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Allows user to remove and install belts in seconds. Will not interfere with factory seat belt.

For Installation instructions please CLICK HERE

Brey Krause Seat Floor Mount Adapter with Integrated Sub Strap Mount - R-907X Series Seat Mounting Brackets.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: Type 304 stainless steel
Finish: Satin finish
Weight: 4 lbs.
Models: Fits 996/997/986/987
Installation: Attaches to driver or passenger side. All necessary hardware included (grade 10.9 M8 bolts as recommended by F.I.A.)
Miscellaneous: Seat brackets must be purchased separately - see BK R-907X series side mount brackets.

For Installation instructions please CLICK HERE


Capitalize on Brey-Krause's innovative engineering with this race seat mounting option for 996/997/986/987/Cayman Porsches.

The R-9044 offers a simple installation process combined with significant adjustment flexibility. The assembly mounts to the floor and places the seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see BK R-907X series brackets).

The entire assembly (including race seat) can be easily installed and removed as a single unit for race events.

Related Items:
R-2044 - Extinguisher Mount

Side Mount Brackets for Sparco Seats
R-9071 - Sparco Evo, Pro 2000
R-9072 - Sparco Evo, Pro 2000
R-9073 - Sparco Evo 2
R-9074 - Sparco Evo 2
R-9761 - Sparco Evo 2 Plus
R-9762 - Sparco Evo 2 Plus
R-9075 - Sparco Evo 2 US
R-9076 - Sparco Evo 2 US

Side Mount Bracket for Recaro Seats
R-9075 - Recaro Pole Position, SPG XL
R-9076 - Recaro Pole Position, SPG XL
R-9755 - Recaro SPA, SPG, Pro HANS
R-9756 - Recaro SPA, SPG, Pro HANS

Side Mounts for OMP Seats
R-9751 - OMP HTE
R-9752 - OMP HTE

Brey Krause Shoulder harness mount. 



Fits:
Porsche 981 Cayman / Cayman GT4 2012-16
Porsche 718 (982) Cayman / Cayman GT4 2017>>

Material: Type 304 stainless steel.
Finish: Wrinkle finish black power coat.
Weight: 5 lbs.
Models: Cayman 981 ('12-'16) and GT4
Installation: Bar attaches to factory cross-member
Miscellaneous: One R-1046 harness mount is required per seat. The R-1046 is designed for use with bolt in harnesses. The shoulder bolts are 12mm, which allows them to work well with 13mm or .5" bolt in brackets. If you wish to convert and existing wrap around harness for use with the R-1046, we recommend the Schroth B24 bolt in bracket (sr B24.15.13 NC, 2 required per seat).

For Installation instructions please CLICK HERE

Brey-Krause's new Cayman Harness Truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The unit is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 is easy to install and remove, utilizing existing factory mounting points.

The lattice is precision water-jet machined. It has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Administration DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

Note: Powder-coated R-1045 shown is custom

Brey Krause Sub Strap Mount Drivers Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Driver Side

Material: Stainless Steel Tubing
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (driver side).
Installation: Attaches to driver side seat assembly.
Miscellaneous: Attaches to driver side seat assembly using factory mounting points. This mount bar is used with Brey-Krause's R-2032 fire extinguisher mount.

For Installation instructions please CLICK HERE

Related Parts:
R-2032 Fire Extinguisher Mount

Brey Krause Sub Strap Mount for BK Side Mount Systems. For Mounting a Sub Strap to R-925X Series & R-9052 Side Mounts.
for seats up to 426mm wide at the front mount points.



Fits:
Porsche 991 / 981 / 997 and 987 models with R-9052 Side Mounts

Material: 304 series stainless steel steel tubing
Finish: brushed stainless finish
Weight: 2 lbs.
Models: R-9052 Side Mounts
Installation: R-9052 Porsche 991, 981, 997, 987 Side Mounts integrated mounting points.
Miscellaneous: For seats up to 426mm wide at the front mount points. For seats over 425mm use the R-9258 sub strap mount.

For Installation instructions please CLICK HERE

Related Parts:
Porsche
R-9052 Side Mounts For OEM 991,981,997,987 Sliders
R-9006 Clip-In Inside Lap Belt Mounts
R-9003 Clip-In Outside Lap Belt Mounts

Brey Krause Sub Strap Mount Passenger Side.



Fits:
Porsche 997 / 987 Sport Bucket Seats - Passenger Side

Material: Stainless steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 997 Optional Sport Bucket Seats, GT2/GT3 Seats (passenger side)
Installation: Attaches to passenger seat assembly
Miscellaneous: Attaches to passenger seat assembly using factory mounting points

For Installation instructions please CLICK HERE

Brey Krause Sub Strap Mount.



Fits:
Porsche 996 / 997
Porsche Cayman / Boxster

Material: 1.5" X 1" X .125" wall carbon steel tubing
Finish: Powder-coated in durable black wrinkle-finish
Weight: 3 lbs.
Models: Fits 996/997, Cayman, and Boxster
Installation: Attaches to R-9060, R-9063, R-9067 side mounts
Miscellaneous: This mount works with the R-9060, R-9063, R-9067 side mount brackets in conjunction with aftermarket sliders and with the optional R-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

For Installation instructions please CLICK HERE

Related Part:
R-9060 Side Mount Brackets for MOMO Super Cup (for Sparco sliders)
R-9063 Side Mount Brackets for Recaro Profi SPG, Recaro Profi SPA, Recaro Pro Racer HANS, Recaro Pro Racer HANS SPA - (fits Recaro Slider Part 0.70.9NT)
R-9067 Side Mount Brackets for Recaro SPA, SPG, and Pro Racer HANS Seats
R-2030 Fire Extinguisher Mount - Boxster & 996/997