Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.com/images/schemaLogo.png https://www.design911.com/images/schemaLogo.png +443456003478 https://www.design911.com Facebook Instagram

TEXTAR Brakes

Refine by Car Type
DISPLAYING 1 to 11 (of 11 products)
Brake disc rotor, Front. Porsche 970 Panamera (OE Ref: 298615301B / 298615302B)
Code: 29861530
Brake Disc FRONT Ø: 360mm

textar

front
Porsche 970 Panamera 3.6L V6 2WD
Porsche 970 Panamera 4 3.6L V6 4WD
Porsche 970 Panamera S 4.8L V8
Porsche 970 Panamera 4S 4.8L V8
Porsche 970 Panamera GTS 4.8L V8
Porsche 970 Panamera 3.0L Diesel
Porsche 970 Panamera 3.0L Hybrid

Not for cars with Ceramic brake (PCCB)
Not for Special model : Panamera 4 GTS

This product supersedes Porsche's old part numbers:
- 97035140300 (LEFT) / 97035140400 (RIGHT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

29861530
97035140300
97035140400
97035140301
97035140401
298615301B
298615302B

The product you are viewing cross references to these numbers
Best Price
Brake disc rotor, REAR. Porsche 970 Panamera / 971 Panamera (OE Part No. 298615601A / 298615602A)
Code: 97161560
Brake disc rotor, Texatar pro
REAR

Diameter Ø: 330,0 mm
Thickness: 28,0 mm
Min. Thickness: 26,0 mm
Total height: 75,0 mm

textar

rear
Porsche 970 Panamera 3.0L DIESEL V6 2WD - REAR
Porsche 970 Panamera 3.0L HYBRID V6 2WD - REAR
Porsche 970 Panamera 3.6L V6 2WD - REAR
Porsche 970 Panamera 4 3.6L V6 4WD - REAR
Porsche 970 Panamera S 4.8L V8 - REAR
Porsche 970 Panamera 4S 4.8L V8 - REAR

Porsche 971 Panamera S 2017>> - REAR
(I2EE) For cars with 18inch brake disc, brake caliper in anodised Silver
(I2EJ) For cars with 18inch brake disc, Silver brake caliper (NAR)

This product supersedes Porsche's old part numbers:
97035240300 (LEFT) / 97035240400 (RIGHT)

Characteristics of High Carbon Textar PRO+ :

  • Increased strength thanks to the greater proportion of carbon in the product
  • Optimised brake reaction: Brake judder is minimised due to reduced disc distortion
  • More even heat distribution due to better thermal conductivity
  • Higher thermal load capacity

Benefits:

  • Reduction in braking noise (less susceptible to screeching)
  • Corrosion protection
  • Improved visual appearance of the brake discs, e.g. when used with alloy wheels
  • Reduced assembly time: No removal of protective oil necessary
  • Time saving thanks to assembly aid, in future fixing screws included


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97161560
97035240300
97035240400
92220607
92220707
298615601A
298615602A
971615601P
971615602P

The product you are viewing cross references to these numbers
Best Price
Brake fluid boiling point tester kit. textar
Code: TEX1000BFT
Brake fluid boiling point tester kit. Textar

textar

Boiling point brake fluid testing is the only test method approved by brake & brake fluid manufacturers

  • Increase service revenue & road safety  
  • Accurate, reliable & repeatable results
  • Operates off the vehicles own 12 volt battery
  • Measures up to 320°, suitable for use on all grades of brake fluid including racing fluids
  • Multilanguage: English, German, French, Spanish, Italian



Best Price
Brake fluid DOT 4 20ltr Textar
Code: 95002500
Brake fluid DOT 4 20Ltr Textar


textar

Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake. 
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.

Brake fluid should be changed every two years. 

The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).

Boiling Point and Viscosity

Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.

Wet Boiling Point
 - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut.

Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted. 

Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.

Best Price
Brake fluid DOT 4 LV (Low Viscosity) Textar.
Code: 95006

Brake fluid DOT 4 LV (Low Viscosity) Textar.

textar

Textar DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ESP, ABS and ASR with a high boiling point and outstanding performance at very low temperatures.

DOT 4 LV (Low Viscosity)
Dry Boiling Point ≥ 260° C 
Wet Boiling Point ≥ 165° C 
Viscosity at -40C < 750 mm2 /s

Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake. 
To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.

Brake fluid should be changed every two years. 

The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).

Boiling Point and Viscosity

Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.

Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut. <

Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted. 

Important Notes

• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.

Best Price
Brake fluid dot 4 Textar
Code: 95002
Brake fluid DOT 4 

textar

Brake fluid is one of the most important fluids in a car as without it, stopping the vehicle safely would be impossible. The Brake fluid transmits the force exerted by the driver on the brake pedal onto the wheel brake. 

To ensure perfect operation of the brakes, the brake fluid must be changed regularly during inspection or maintenance and tested with the correct brake fluid tester.

Brake fluid should be changed every two years. 

The higher the DOT class, the higher the boiling temperature and wet boiling point. Higher DOT classes tend to allow longer maintenance intervals. The DOT standards are based on the American FMVSS-116 standard of the Department of Transportation (DOT).

Boiling Point and Viscosity

Dry Boiling Point - describes the property of the sealed new brake fluid. In this state, the brake fluid is almost anhydrous (substance containing no water). The dry boiling point is usually between 240 and 280°C.

Wet Boiling Point - determines the property of the brake fluid at the end of its life cycle, at a water content of 3.5% the fluid should be replaced. This defined wet boiling point must not be undercut. 

Viscosity - describes the flow rate of the brake fluid. The lower the viscosity, the faster the brake fluid flows through the brake system, and the faster the brake signals are transmitted. 

Important Notes
• Brake fluid is poisonous and a hazardous waste.
• Be careful when changing. The fluid weakens paints and plastics.
• It must not come into contact with eyes or skin. Always rinse spilled liquid with water.
• Do not pour the liquid into drinking water or mix with used oil.
• The colour of the brake fluid reveals nothing about its quality.
• Brake fluid should be stored in its original packaging and in a dry, cool and well-ventilated place.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95002
00004430501
00004321082

The product you are viewing cross references to these numbers
Best Price
Brake pads, Front. Porsche 958 Cayenne / 970 Panamera (OE No. 95835193900, 95835193901, 95835193910)
Code: PAA698151TEX
Brake pads set of 4 for one axle.

textar

front
Porsche Cayenne (958) V6 3.0L HYBRID
Porsche Cayenne (958) V8 4.2L S DIESEL
Porsche Cayenne (958) V8 4.8L S
Porsche Cayenne (958) V8 4.8L TURBO

Porsche 970.1 Panamera 3.0L DIESEL V6
Porsche 970.1 Panamera 3.6L V6 2WD
Porsche 970.1 Panamera 4 3.6L V6 4WD
Porsche 970.1 Panamera S 4.8L V8 (chassis number 97AL042784>> and A7AL061416>>)
Porsche 970.1 Panamera 4S 4.8L V8 (chassis number 97AL042784>> and A7AL061416>>)
Porsche 970.1 Panamera TURBO 4.8L V8 (chassis number 97AL090415>> and A7AL090417>>)

Sold as set of 4 pads for one axle.

This product supersedes Porsche's old part numbers:
- 95835193900
- 95835193901

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAA698151TEX
95835193900
95835193901
95835193910
PAA698151
7P0698151G
9J1698151H
9J1698151K
95B698151AL
95B698151BB
95B698151C
95535193960
95535193961
95535193962
95535193963
95535193965

The product you are viewing cross references to these numbers
Best Price
Brake pads, Front. Porsche 970 Panamera S / 4S / Turbo
Code: 95535193965TEX
Brake pads SET OF 4 for one axle.

textar

*Option code I1LP

front
Porsche 970 Panamera S 4.8L V8 (chassis number: >>97AL042783 and >>A7AL061415)
Porsche 970 Panamera 4S 4.8L V8 (chassis number: >>97AL042783 and >>A7AL061415)
Porsche 970 Panamera TURBO 4.8L V8 (chassis number: >>97AL090414 and >>A7AL090416)

Porsche 957 Cayenne MKII TURBO 4.8L

Sold as set of 4 pads for one axle.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95535193965TEX
2455301
95535193963
95535193961
95535193962
95535193965
95535193960

The product you are viewing cross references to these numbers
Best Price
Brake pads, Rear. Porsche 970 Panamera 3.6L / 4.8L / Turbo
Code: 97035294908TEX
Brake pads SET OF 4 for one axle.

textar

rear
Porsche 970 Panamera 3.0L DIESEL V6 2WD Rear
Porsche 970 Panamera 3.0L HYBRID V6 2WD Rear
Porsche 970 Panamera 3.6L V6 2WD Rear
Porsche 970 Panamera 4 3.6L V6 4WD Rear
Porsche 970 Panamera S 4.8L V8 Rear
Porsche 970 Panamera 4S 4.8L V8 Rear
Porsche 970 Panamera TURBO 4.8L V8 Rear

Sold as set of 4 pads for one axle.

Only for cars without ceramic discs

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97035294908TEX
2455401
97035294904
97035294904TRW
97035294908
971698451A
971698451L

The product you are viewing cross references to these numbers
Best Price
Cera-Tec metal free permanent lubricant textar
Code: TEXCERA
Cera-Tec metal free permanent lubricant Textar


textar

For brake systems and is highly temperature-resistant (up to 1,000°C).

Available in 75ml tube and 5ml sachet

The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids 
• Pressure-resistant / high viscosity

Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals

Application:
Apply a thin layer of Cera Tec on the marked sections


Best Price
Hydra tec lubricant for maintenance work and protection Textar
Code: 81001

Hydra tec lubricant for maintenance work and protection Textar

textar

Available in 75ml Tube or 5ml Sachet

The Advantages of Hydra Tec:

  • Facilitates the installation of hydraulic brake components
  • Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
  • Free of mineral oils and compatible with EPDM rubber
  • In addition, running surfaces are protected against corrosion

Hydra Tec is suitable for lubricating:

  • Cylinder running surfaces
  • Pistons
  • Sealing elements

Application:
Apply a thin layer of Hydra Tec on the marked sections.

Note:
Hydra Tec should be applied thinly and evenly. 
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.


Best Price
DISPLAYING 1 to 11 (of 11 products)
You may also like
Popular Models