Sealey Blade 1638 x 13 x 063mm 6tpi - SM5
Code: SM5/113/6
Sealey Blade 1638 x 13 x 0.63mm 6tpiBandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics.
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113/6• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 6tpi
Note: Substitute xx for blade pitch at the end of model number, i.e. SM35B/14 is 14tpi blade for SM35CE• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.
• Model No. SM5/113/6• Bandsaw blade with hardened cutting edges.
• Suitable for cutting steel, aluminium, brass, copper and plastics.Blade 1638 x 13 x 0.63mm 6tpi
Related products
Sealey Bandsaw 400mm Horizontal Hydraulic Arm
Code: SM353CE
Sealey Bandsaw 400mm Horizontal Hydraulic ArmManufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved. Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system. Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.• Large cutting capacity.
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast-iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• Model No. SM353CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system.
• Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.400mm Horizontal Hydraulic Arm Bandsaw
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast-iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• Model No. SM353CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system.
• Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam.400mm Horizontal Hydraulic Arm Bandsaw
Sealey Bandsaw 300mm Horizontal Hydraulic Arm
Code: SM35CE
Sealey Bandsaw 300mm Horizontal Hydraulic ArmManufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved. Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on individual circuits. Heavy-duty single phase electric motor.• Fully CE approved.
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• 300mm Capacity at 90° and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded and fitted with pulley cover safety switch.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Model No. SM35CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system and main power controls are switched on individual circuits.
• Heavy-duty single phase electric motor.300mm Horizontal Hydraulic Arm Bandsaw
• Heavy-duty power bandsaw with hydraulic cutting arm control for a smooth cut.
• 300mm Capacity at 90° and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded and fitted with pulley cover safety switch.
• Saw arm fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Model No. SM35CE• Manufactured to comply with Safety of Machinery (Safety) Regulations 1992 (and amendments) and fully CE approved.
• Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance.
• Coolant fluid system and main power controls are switched on individual circuits.
• Heavy-duty single phase electric motor.300mm Horizontal Hydraulic Arm Bandsaw
Sealey Metal Cutting Bandsaw 115mm 3-Speed with Stand
Code: SM4
Sealey Metal Cutting Bandsaw 115mm 3-Speed with StandCompact size and powerful motor make this unit suitable for the mobile workshop. Features swivel arm facility for added versatility. Supplied with anti-vibration feet and workshop stand.• 3-Speed settings.
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Provided with anti-vibration feet for mounting on bench or supplied workshop stand.
• Model No. SM4• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Supplied with anti-vibration feet and workshop stand.115mm 3-Speed Metal Cutting Bandsaw with Stand
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Provided with anti-vibration feet for mounting on bench or supplied workshop stand.
• Model No. SM4• Complies with the requirements of the Machinery Safety Directive 98/37/EEC and full CE approved.
• Fully guarded blade with magnetic no-load voltage switch to prevent motor re-start in the event of power failure or blade jam.
• Fitted with oil-bath gearbox and life lubricated drive bearings for quiet, smooth operation.
• Compact size and powerful motor make this unit suitable for the mobile workshop.
• Features swivel arm facility for added versatility.
• Supplied with anti-vibration feet and workshop stand.115mm 3-Speed Metal Cutting Bandsaw with Stand
