Electrics
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
• Large back-lit LCD screen.
• CAN Enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Turns off MIL light, clears codes and resets monitors.
• Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Reads and displays the live ECU/PCM data stream, plotting selected functions graphically.
• Live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• Built-in data library with lookup functions is also included.
• Updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA Batteries.• Applications: Chrysler, Ford and Vauxhall/Opel (96-07) with EOBD based engines.
• Reads and clears airbag, ABS and transmission DTCs.
• Large back-lit LCD screen.
• CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Turns off MIL light, clears codes and resets monitors.
• Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Reads and displays the live ECU/PCM data stream, plotting selected functions graphically.
• Gives a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• Built-in data library with lookup functions is also included.
• Updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA batteries.
• Model No. VS864• Sophisticated hand-held scanning tool enables fast and easy access to engine based EOBD DTCs with the added versatility of reading and clearing airbag, ABS and transmission DTCs on Chrysler, Ford and GM vehicles from ’84on.
• The VS864 gives clear, concise DTC definitions on its large back-lit LCD screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA batteries.EOBD Code Reader & Reset Tool - Chrysler/Ford/Vauxhall/Opel
• Back-lit LCD display with simple to follow menu-driven software.
• Reads and clears DTCs for engine, ABS, airbags, transmission, radio, climate control (A/C), steering wheel and immobilizer vehicle modules.
• Resets oil service light (including Long Life), retrieves vehicle information (VIN), displays I/M readiness status and OBDII freeze frame data.
• Turns off malfunction indicator lamp (MIL) for engine, airbag, ABS and automatic transmission.
• Supplied in handy-case with EOBD and USB cables.
• Fully updatable from the internet.
• Applications: Audi, Seat, Skoda, VW.
• Model No. VS862• Hand-held controller, suitable to work with VAG vehicles including those equipped with Controller Area Network (CAN) protocol.
• Back-lit LCD display with simple to follow menu-driven software.
• Reads and clears diagnostic trouble codes (DTCs) for engine, ABS, airbags, transmission, radio, climate control (A/C), steering wheel and immobilizer vehicle modules.
• Also resets oil service light (including Long Life), retrieves vehicle information (VIN), displays I/M readiness status and OBDII freeze frame data.
• Turns off malfunction indicator lamp (MIL) for engine, airbag, ABS and automatic transmission.
• Supplied in storage pouch with EOBD and USB cables.
• Fully updatable from the internet. Optional connector lead available for 2-pin VAG applications - Model No. VS8X01VAG Code Reader & Reset Tool - EOBD & Generic
• Protects fingers and eliminates the risk of damaging the wiring loom when carrying out electrical diagnostics.
• Three wire gauge size guides.
• Model No. TA115• Designed to guide the point of a test probe to the centre of a wire when testing vehicle wiring.
• Saves your fingers and eliminates the risk of damaging the wiring loom when carrying out electrical diagnostics.
• Three wire gauge size guides.Wire Piercing Guide Clip
• 5-in-1 Wire stripper suitable for wires from 0.13-6mm² (26-10AWG).
• Crimping attachment suitable for non-insulated terminals including 1.5, 2.5, 4 and 6mm², also insulated auto-ignition terminals 7 and 8mm.
• Crimps insulated terminals 1.5, 2.5 and 6mm².
• Includes wire cutters hardened to 40-50 HRC.
• Model No. AK225• Plate steel construction, chemically blackened with oversize vinyl grips.
• 5-in-1 Wire stripper suitable for wires from 0.13-6mm² (26-10AWG).
• Crimping attachment suitable for non-insulated terminals including 1.5, 2.5, 4 and 6mm², also insulated auto-ignition terminals 7 and 8mm.
• Crimps insulated terminals 1.5, 2.5 and 6mm².
• Includes wire cutters hardened to 40-50 HRC.Automatic Wire Stripping Tool
• Jaw action prevents crushing or cutting even the finest wires.
• Supplied with length gauge and fitted with vinyl grips.
• Model No. AK2252• One handed, compound action grips and strips electric cables from 1.0-3.2mm² automatically.
• Jaw action prevents crushing or cutting even the finest wires.
• Supplied with length gauge and fitted with vinyl grips.Automatic Wire Stripping Tool
• Fully automatic, single action grips and strips all types of wire from 0.2-6.0mm² with minimal pressure to handles and no damage to the inner core of the wire.
• Adjustable length stop is easily swivelled to allow longer stripping.
• Precision machined wire cutting blades for long life.
• Features three crimping elements for insulated, non-insulated (1.5-6.00mm²) and auto-ignition terminals (7-8mm).
• Model No. AK2255• Heavy-duty, professional automatic wire stripper with alloy steel jaws.
• Fully automatic, single action grips and strips all types of wire from 0.2-6.0mm² with minimal pressure to handles and no damage to the inner core of the wire.
• Adjustable length stop is easily swivelled to allow longer stripping.
• Precision machined wire cutting blades for long life.
• Features three crimping elements for insulated, non-insulated (1.5-6.00mm²) and auto-ignition terminals (7-8mm).Automatic Heavy-Duty Wire Stripping Tool
• Two piece design allows the second wire to be disconnected if required.
• Sizes to fit the most common sizes of automotive wiring.
• Model No. WT120• Allows for a wire to be connected into the electrical circuit.
• Two piece design allows the second wire to be disconnected if required.
• Sizes to fit the most common sizes of automotive wiring.120pc Wire T-Tap Set Assorted
• Two piece design allows the second wire to be disconnected if required.
• Sizes: Splice 1.0-2.5mm, Connector 1.5-2.5mm.
• Model No. WTB50• Allows for a wire to be connected into the electrical circuit.
• Two piece design allows for the second wire to be disconnected if required.Wire T-Tap Set 50pc Blue
• Two piece design allows the second wire to be disconnected if required.
• Sizes: Splice 0.5-1.0mm, Connector 0.5-1.5mm.
• Model No. WTR50• Allows a wire to be connected into the electrical circuit.
• Two piece design allows the second wire to be disconnected if required.Wire T-Tap Set 50pc Red
• Two piece design allows the second wire to be disconnected if required.
• Sizes: Splice 4mm, Connector 4-6mm.
• Model No. WTY50• Allows a wire to be connected into the electrical circuit.
• Two piece design allows the second wire to be disconnected if required.Wire T-Tap Set 50pc Yellow