Steering, Hub & Suspension
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
• Reverse spiral flutes are designed to bite down to provide maximum gripping power.
• Contents; Sockets; 17, 19, 21, 22mm x 150mm, Drift; 12 x 160mm.
• Supplied in storage case.
• Model No. SX204• Drop-forged Chrome Molybdenum steel extractor sockets.
• Reverse spiral flutes are designed to bite down to provide maximum gripping power.
• Set supplied with 12mm straight drift to knock bolt out after use.
• Supplied in storage case.5pc 1/2"Sq Drive 150mm Impact Twist Extractor Socket Set
• Attach the 75mm extension bar and slip on one of the double end impact tools.
• Simple and fast interchange, pull socket off bar, flip 180°, put it back on.
• High quality Chrome Molybdenum impact sockets with heat treatment and anti-corrosion finish.
• Model No. SX271• Flip socket set featuring wheel nut socket one end and fluted socket the other, for removing locking or rounded off wheel nuts.
• Attach the 75mm extension bar and slip on one of the double end impact tools.
• Simple and fast interchange, pull socket off bar, flip 180°, put it back on.
• High quality Chrome Molybdenum impact sockets with heat treatment and anti-corrosion finish.4pc 1/2"Sq Drive Impact Wheel Nut/Removal Flip Socket Set
• Application: Springs Ø120-140mm.
• Model No. 13.0001.19• Yoke suitable for RE228.
• Application: Springs Ø120-140mm.
• Supplied as singles.Jaw - Springs Ø120-140mm
• Model No. 13.0001.15• Yoke suitable for RE228.
• Application: Ø90-120mm.
• Supplied as singles.Jaw - Springs Ø90-120mm
• Model No. 99.0050• Yoke for RE224 & RE225 Ø80-120mmJaw 80-120mm Black Coated
• Calibrated in bar and psi.
• Fitted with 400mm rubber hose and single clip-on connector.
• Model No. SA9303• Composite body and dial type jumbo gauge with rubber protector.
• Calibrated in bar and psi.
• Fitted with 400mm rubber hose and single clip-on connector.Jumbo Tyre Inflator with Clip-On Connector
• Calibrated in bar and psi.
• Fitted with 400mm rubber hose and single push-on connector.
• Model No. SA9313• Composite body and dial type jumbo gauge with rubber protector.
• Calibrated in bar and psi.
• Fitted with 400mm rubber hose and single push-on connector.Jumbo Tyre Inflator with Push-On Connector
• Model No. 90.0040• Yoke for RE224 & RE225 Ø180-230mmLarge Jaw 180-230mm Black Coated
• Single leg configuration and reversible contact probes allow on-ramp use.
• Works on practically all cars and light commercials with rim diameters from 200 to 600mm.
• Powered by 2 x AA cells and includes operating instructions.
• Model No. GA50• Updated version of optical system uses low radiation laser beam to indicate toe-in or toe-out.
• Single leg configuration and reversible contact probes allow on-ramp use.
• Works on practically all cars and light commercials with rim diameters from 200 to 600mm.
• Powered by 2 x AA cells and includes operating instructions.Laser Wheel Alignment Gauge
• Features soft grip handle for added comfort.
• Length: 210mm.
• Model No. VS5202• Compatible with a variety of different lock rings found on many automotive applications such as brakes, transmission and CV joints.
• Features soft grip handle for added comfort.Lock Ring Pliers Slim Angled Head - External
• Also useful for removing damaged/corroded fixings.
• Phosphate finish for resistance to corrosion.
• Includes drift to aid removal of fixing from socket.
• Suitable for use with impact wrenches.
• Sockets: 17, 19, 21, 22mm.
• Supplied in storage case.
• Model No. SX201• Forged Chrome Molybdenum steel 1/2"Sq drive sockets for removal of wheel locking nuts when the key is not available.
• May also be used on fixings too damaged or corroded for standard sockets.
• Phosphate finish for resistance to corrosion.
• Set includes drift to aid removal of fixing from socket.
• Suitable for use with impact wrenches.
• Supplied in storage case.4pc 1/2"Sq Drive Locking Wheel Nut Removal Set 17, 19, 21, 22mm
• Used with air impact wrench running in reverse, deep reverse helix grips locking wheel nut.
• Ideal for busy fast fit operation.
• Removal action will distort wheel nut and replacement is recommended.
• 21mm & 25mm Sockets fit nuts on most vehicles.
• Model No. SX200• Chrome Molybdenum steel socket with 1/2"Sq drive.
• Used with air impact wrench running in reverse, deep reverse helix grips locking wheel nut.
• Ideal for busy fast fit operation.
• Removal action will distort wheel nut and replacement is recommended.
• 21 and 25mm Sockets fit nuts on most vehicles.2pc 1/2"Sq Drive Locking Wheel Nut Removal Set
• May also be used on fixings too damaged or corroded for standard sockets.
• Suitable for use with impact wrenches.
• Contents: 17, 18.5, 20, 21.5, 23, 24.5, 26mm.
• Supplied in tough composite storage case.
• Model No. SX202• Forged Chrome Molybdenum steel 1/2"Sq drive sockets for removal of wheel locking nuts.
• May also be used on fixings too damaged or corroded for standard sockets.
• Suitable for use with impact wrenches.
• Supplied in a tough composite storage case.7pc 1/2"Sq Drive Locking Wheel Nut Removal Set
• 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings.
• Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange.
• Suitable for Citroen and Peugeot 405 lower ball joints.
• Model No. SX027• Heat treated alloy steel socket.
• 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings.
• Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange.
• Suitable for Citroen and Peugeot 405 lower ball joints.Lower Ball Joint Socket Peugeot 405/Citroen
• Suitable for removal of OEM and aftermarket lower ball joints.
• Applications: Citroen; Xantia, C5, C6, Peugeot; 405, 406, 407, 605, 607.
• Supplied in carry-case.
• Model No. SX0271• Set of two heat treated alloy steel sockets.
• Suitable for removal of OEM and aftermarket lower ball joints on Citroen and Peugeot vehicles.
• Supplied in carry-case.2pc Lower Ball Joint Socket Set
• Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.
• Model No. AK2093• Forged construction with polished mirror finish.
• Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.1/2"Sq Drive 4-Way Wheel Brace 17, 19, 21mm
• Socket sizes include 17, 19, 21 and 22mm.
• Model No. AK2090• Forged construction with hot forged sockets and baked finish.4-Way Lug Wrench
• Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement and one for adjusting kingpin inclination.
• Camber gauge with fixed graduation from +5° to -5°.
• Adjustable castor gauge graduated from +11° to -3°.
• Kingpin gauge graduated from 0° to 14° left to right.
• Magnetic plate Ø: 85mm.
• Supplied in tough composite carry-case.
• Model No. GA450• Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination.
• Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement and one for adjusting kingpin inclination.
• Camber gauge with fixed graduation from +5° to -5°.
• Adjustable castor gauge graduated from +11° to -3°.
• Kingpin gauge graduated from 0° to 14° left to right.
• Supplied in tough composite carry-case.Magnetic Camber Castor & Kingpin Gauge
• Quick and accurate measurement of camber and castor angles.
• Large adjuster knob for convenient zeroing of bubble during castor angle measurement.
• Graduated from +6° to -6°.
• Supplied in carry-case.
• Model No. GA45• Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles.
• Large adjuster knob for convenient zeroing of bubble during castor angle measurement.
• Graduated from +6° to -6°.
• Supplied in carry-case.Magnetic Camber/Castor Gauge
• Suitable for workshop, roadside or agricultural use on wheels up to 420mm.
• Use with ratchet wrench or spanner.
• Model No. TC9660• Wheel mounting manual bead breaker.
• Suitable for workshop, roadside or agricultural use on wheels up to 420mm.
• Use with ratchet wrench or spanner.Manual Bead Breaker
• No need to disassemble.
• Includes all necessary adaptors.
• Use with ratchet wrench.
• Supplied in carry-case.
• Model No. VS1272• Suitable for the in situ removal and installation of front lower ball joints on W220, W211 and W230 Mercedes.
• No need to disassemble.
• Includes all necessary adaptors and supplied in carry-case.
• Use with ratchet wrench.Mercedes Lower Ball Joint Remover/Installer
• Model No. 90.0020• Yoke for RE224 & RE225 Ø145-195mmMiddle Jaw 145-195mm Black Coated
• Pressure gauge reads up to 8bar/120psi.
• 600mm Air Hose and 3.3mtr Power Cord.
• Integral storage for supply lead and air output hose.
• Features work light for use in low light areas.
• Light can also be set to flash for emergency use.
• Suitable for inflating tyres on cars, vans and 4x4s.
• Model No. MAC01• 12V Mini air compressor with delivery of 25ltr/min.
• Integral storage for supply lead and air output hose.
• Features work light for use in low light areas.
• Light can also be set to flash for emergency use.
• Pressure gauge reads up to 8bar/120psi.
• Suitable for inflating tyres on cars, vans and 4x4's.12V Mini Air Compressor with Work Light
• Powered by high power 12V motor and suitable for inflating tyres on cars, vans and 4x4s.
• Integral gauge reads up to 17bar/250psi.
• Compresses free air to 30psi at the rate of 35ft³/hr.
• Features work light and flashing emergency light and is supplied with 3mtr power cable with plug for use in cigarette lighter socket, 600mm high pressure hose with locking connector and accessory kit including ball needle and adaptors for inflatables.
• Model No. MAC23250• Stylish and compact composite case incorporating cable tidy on base.
• Powered by high power 12V motor and suitable for inflating tyres on cars, vans and 4x4s.
• Integral gauge reads up to 17bar/250psi.
• Compresses free air to 30psi at the rate of 35ft³/hr.
• Features work light and flashing emergency light and is supplied with 3mtr power cable with plug for use in cigarette lighter socket, 600mm high pressure hose with locking connector and accessory kit including ball needle and adaptors for inflatables.12V Mini Compressor with Emergency Light
• Mount directly onto work surface.
• Supplied with tyre bar and alignment cone.
• Model No. TC967• Suitable for changing tyres with small rim diameters commonly found on agricultural, leisure and industrial vehicles such as ATVs, golf buggies, mowers, garden tractors and handling equipment.
• Mount directly onto work surface.
• Supplied with tyre bar and alignment cone.Mini Tyre Changer
• Kit includes a seal removal puller and seven adaptors to fit most sizes of seal.
• Designed to allow original pulley/flange bolt to be used to press in the new seal, ensuring a squarely seated seal every time.
• Supplied in carry-case.
• Model No. VS7002• Comprehensive kit for the removal and installation of oil seals without damaging the new seal or housing.
• Kit includes a seal removal puller and seven adaptors to fit most sizes of seal.
• Designed to allow original pulley/flange bolt to be used to press in the new seal, ensuring a squarely seated seal every time.
• Supplied in carry-case.Oil Seal Removal/Installation Kit
• Measures toe-in and toe-out by contact with wheel rims and optical sight to alignment markers.
• Works on practically all cars and light commercial vehicles with rim diameters between 200mm and 600mm.
• Model No. GA40• Steel and cast aluminium construction.
• Measures toe-in and toe-out by contact with wheel rims and optical sight alignment markers.
• Works on practically all cars and light commercial vehicles with rim diameters between 200 and 600mm.
• Some assembly required prior to use.
• Operating instructions included.Optical Wheel Alignment Gauge
• Model No. 90.0100• Yoke for RE224 & RE225 Citroen/Peugeot Break Rear AxlePeugeot Break Jaw Black Coated
• Heavy-duty, lightweight unit made from high tech steel alloy.
• Supplied with one pair of yokes that will cover 90% of the car market.
• Safety yokes, with polyurethane inserts for improved grip, are carefully shaped to prevent spring bowing.
• Yoke brackets are adjustable to suit all types of springs including conical.
• 1/2"Sq Drive for direct use with most air wrenches.
• Model No. RE227• 2500kg Maximum loading.
• Heavy-duty, lightweight unit made from high tech steel alloy.
• Supplied with one pair of yokes that will cover 90% of the car market.
• Safety yokes, with polyurethane inserts for improved grip, are carefully shaped to prevent the coil spring from bowing.
• Yoke brackets are adjustable to suit all types of springs, including conical.
• 1/2"Sq Drive for direct use with most air wrenches.Professional Coil Spring Compressor - Multi-Spring Yokes 2500kg
• Features a yoke extension bracket that also allows use on conical springs.
• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications and plastic yoke protectors that protect the spring coating from damage which can invalidate the vehicle manufacturer's warranty.
• Safety yokes carefully shaped to stop the spring bowing while under compression.
• Model No. RE229• Suitable for MacPherson strut coil springs.
• Features a yoke extension bracket that also allows use on conical springs.
• Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications and plastic yoke protectors that protect the spring coating from damage which can invalidate the vehicle manufacturer's warranty.
• Safety yokes carefully shaped to stop the spring bowing while under compression.Professional Coil Spring Compressor Set 1000kg Capacity
• Features high accuracy gauge, dual calibrated in psi and bar.
• 2.75mtr Hose with clip-on connector.
• Range: 0-9.5bar (0-140psi).
• Optional range of connectors available.
• Model No. SA37/94• Manufactured to comply with EU Directive 86/217.
• Extruded aluminium body with large rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar.
• Fitted with 2.75mtr hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres.
• Supplied with a serial numbered calibration certificate.Professional Tyre Inflator with 2.75mtr Hose & Clip-On Connector
• Fitted with 500mm rubber hose and single clip-on connector.
• Range: 0-10bar(0-145psi).
• Model No. SA930• Composite body and dial type gauge with rubber protector.
• Fitted with 500mm rubber hose and single clip-on connector.Professional Tyre Inflator with Clip-On Connector
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• 300mm Flexible hose with 240mm twin push-on air connector.
• Range: 0-9.5bar(0-140psi).
• Optional connectors available.
• Model No. SA37/93• Manufactured to comply with 86/217/EEC Measuring Instruments Directive.
• Extruded aluminium body with large rubber bumper.
• Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
• 300mm Flexible hose fitted with 240mm, twin push-on, air connector.
• Supplied with a serial numbered calibration certificate.Professional Tyre Inflator with Twin Push-On Connector
• Fitted with 500mm rubber hose and a twin push-on connector.
• Range: 0-10bar(0-145psi)
• Model No. SA931• Composite body and dial type gauge with rubber protector.
• Fitted with 500mm rubber hose and twin push-on connector.Professional Tyre Inflator with Twin Push-On Connector
• Can be used in situ - no need to remove trailing link assembly from vehicle.
• Applications: Ford; Fiesta IV (96on), Ka.
• Supplied in carry-case.
• Model No. VSE4779• Remove/install Fiesta IV rear axle mounting bushes.
• Can be used in situ - no need to remove trailing link assembly from vehicle.
• Supplied in carry-case.Rear Axle Bush Tool - Ford Fiesta IV, Ka
• Use with ratchet wrench or spanner to insert composite bushes.
• Supplied in storage case.
• Applications: Audi; A3, VW; Bora, Golf IV.
• Model No. VS722• Suitable for the in situ installation of the rear axle mounting bushes on selected VW and Audi vehicles.
• Use with ratchet wrench or spanner to insert composite bushes.
• Supplied in storage case.Rear Bush Installation Tool - Audi A3 VW Golf IV
• Can be used in situ - no need to remove sub-frame from vehicle.
• Application: Ford; Focus MK1 1998-2004.
• Model No. VSE4780• Remove/install rear sub-frame bushes on Ford Focus.
• Can be used in situ - no need to remove sub-frame from vehicle.Rear Bush Tool - Ford Focus MK1 (98-04)
• Suitable for old and new style bushes.
• Applications: BMW 3 Series (E36, E46 including E46 Compact).
• Model No. VSE5575• Remove/install, in situ, the upper and lower damping bushes on the rear trailing arm of BMW 3 Series.
• The bush design has been changed and this tool will remove both old and new bushes, and will install the new slotted bushes.Rear Trailing Arm Bush Removal/Installation Tool - BMW 3 Series
• Use with standard spanner and a little light oil.
• Model No. AK310• Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads.
• Use with a standard spanner and a little light oil.
• Thread file restores damaged external threads on any diameter, right or left hand - just select correct pitch.
• Ideal for restoration work.
• Supplied in tool tray.15pc Re-Threader Kit - Metric
• Use with a standard spanner and a little light oil.
• Thread file restores damaged external threads on any diameter, right or left hand - just select correct pitch.
• Model No. AK311• Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads.
• Thread file restores damaged external threads on any diameter, right or left hand.
• Supplied in carry-case.42pc Re-Threader Master Kit - Metric