Steering, Hub & Suspension
• Moulded handle enables extra grip.
• Suitable for use with motorcycle, small agricultural or leisure tyres.
• Model No. VS1818• Quality drop-forged and tempered alloy steel with flat rounded tip.
• Moulded handle enables extra grip.
• Suitable for use with motorcycle, small agricultural or leisure tyres.300mm Deluxe Tyre Lever
• Features moulded rubber handle enabling extra grip.
• Model No. MS015• Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement.
• Features moulded rubber handle enabling extra grip.Disc Brake Opening Tool
• Limits potential damage done by other methods to the forks.
• Model No. MS016• Designed for easy installation of fork seals.
• Limits potential damage done by other methods to the forks.Fork Seal Driver
• Works on bearing or hub centred wheels and supplied with two centre posts.
• Min./Max. Wheel Size: 102/524mm.
• Includes manual bead breaker and is supplied with tyre bar for mounting and de-mounting.
• Fast and simple operation.
• Supplied with operating instructions.
• To prevent damage to the rims of the alloy wheel, it is essential to use an appropriate tyre bar.
• Model No. TC965• Heavy-duty tyre changer suitable for wide variety of tyres and wheels including those fitted to motorcycles, ATVs, go-karts and golf buggies.
• Works on bearing or hub centred wheels and is supplied with two centre posts.
• Includes manual bead breaker and supplied with tyre bar for mounting and de-mounting.
• Fast and simple operation.
• Supplied with operating instructions.
• To prevent damage to the rim of alloy wheels, it is essential to use an appropriate tyre bar.Motorcycle & Mini Tyre Changer
• Slot hooks round spoke and pushes bead down on opposite side of the tool.
• The bead is held into position while fitting the tyre with tyre levers.
• No more struggling to keep the bead down.
• Model No. VS1821• A must for installing tyres on spoked wheels.
• Slot hooks round spoke and pushes bead down on opposite side of the tool.
• The bead is held into position while fitting the tyre with tyre levers.
• No more struggling to keep the bead down.Motorcycle Bead Tool
• Suitable for most types of classic and modern motorcycle coil springs.
• Supplied with four spare plastic spring protectors in metal storage case.
• Use with ratchet wrench.
• Model No. VS1824• Essential for the assembly and disassembly of suspension units.
• Suitable for most types of classic and modern motorcycle coil springs.
• Supplied with four spare plastic spring protectors in metal storage case.
• Use with ratchet wrench.Motorcycle Coil Spring Compressor
• Supplied with adjustable ring and oil pipe to measure oil levels from 0-290mm in 5mm increments.
• Features top-up syringe with 70ml capacity.
• Can also be used on bicycles equipped with front suspension.
• Model No. MS033• Specialized tool designed for checking and adjusting oil levels on all conventional and single chamber cartridge motorcycle forks.
• Supplied with adjustable ring and oil pipe to measure oil levels from 0-290mm in 5mm increments.
• Features top-up syringe with 70ml capacity.
• Can also be used on bicycles equipped with front suspension.Motorcycle Fork Oil Level Gauge with Top-Up Syringe
• 8mm Pins on one side and flat blades on the other.
• Features locking adjustment screw to keep tool at required set size with quick release when finished.
• Model No. MS036• Suitable for holding flywheels, clutches and pulleys during removal and installation.
• 8mm Pins on one side and flat blades on the other.
• Features locking adjustment screw to keep tool at required set size with quick release when finished.Motorcycle Locking Pulley Holder
• Eliminates need to balance fuel tank in an awkward position.
• Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hanging hook provided.
• Features 1ltr tank, 1200mm hose, two hose clamps and on/off tap.
• Model No. MS029• Useful must have item when needing to remove fuel tank to perform maintenance on your motorcycle.
• Eliminates need to balance fuel tank in an awkward position.
• Simply remove your tank, connect the auxiliary fuel tank which is gravity fed and hang it up using the hanging hook provided.
• Features 1ltr tank, 1200mm hose, two hose clamps and on/off tap.1ltr Motorcycle Portable Fuel Tank
• Suits most bushes/shocks.
• Supplied in holder.
• Sizes: 12.5, 14, 16, 18mm.
• Model No. MS048• Enables shock bushes to be installed straight and fast.
• Suits most bushes/shocks.
• Supplied in holder.4pc Motorcycle Shock Bushing Driver Set
• Use socket on free end of tool to hold spindle.
• Applications: 24mm; Honda and Suzuki, 22mm; Kawasaki, 19mm; Yamaha.
• Model No. VS1805• Prevents spindle from spinning when tightening or loosening wheel nut.
• Use appropriate socket on free end of tool to hold spindle.
• Three sizes to fit Honda, Kawasaki, Suzuki and Yamaha.Motorcycle Spindle Tool
• Use appropriate socket on free end of tool to hold spindle.
• Four sizes to fit Honda, Kawasaki, Suzuki, Yamaha, Buell and some BMW motorcycles.
• Model No. MS008• Prevents spindle from spinning when tightening or loosening wheel nut.
• Use appropriate socket on free end of tool to hold spindle.
• Four sizes to fit Honda, Kawasaki, Suzuki, Yamaha, Buell and some BMW motorcycles.Motorcycle Spindle Tool 17, 19, 22 & 24mm
• Features 1/2"Sq drive adaptor and four hex bits for different sizes of spindle.
• Spindle Sizes: 17, 19, 22, 24mm.
• Supplied in storage case.
• Model No. VS1808• Prevents spindle from spinning when tightening or loosening wheel nut.
• Features 1/2"Sq drive adaptor and four hex bits for different sizes of spindle.
• Supplied in storage case.5pc Motorcycle Spindle Tool Set
• Universal tool works on most steering stem bearings ranging from Ø30-68mm.
• Can be used in conjunction with Model No. VS1831 Steering Tube Bearing Installer.
• Model No. MS040• Prevents damage associated with removal of stem bearing.
• Universal tool works on most steering stem bearings ranging from Ø30-68mm.
• Can be used in conjunction with Model No. VS1831 Steering Tube Bearing Installer.Motorcycle Steering Stem Bearing Race Removal Tool
• Ideal for engine and exhaust studs.
• Operate using a 19mm spanner and a 5.5mm hex key.
• Thread Sizes: M6 x 1.0, M8 x 1.25, M10 x 1.25mm.
• Model No. MS051• Aids fast installation of threaded studs without risk of damage to thread.
• Ideal for engine and exhaust studs.
• Operate using a 19mm spanner and a 5.5mm hex key.Motorcycle Stud Installation Tool
• Aids the straight installation of the swing-arm needle bearings.
• Supplied with 3 drivers and 3 plates.
• Not suitable for use with impact tools.
• Model No. MS049• Universal tool works on most Japanese bikes.
• Aids the straight installation of the swing-arm needle bearings.
• Supplied with 3 drivers and 3 plates.
• Not suitable for use with impact tools.Motorcycle Swing Arm Bearing Tool
• Model No. MS038• Twin clamp cable oiler for use with spray type silicone or oil on motorcycle cables.Motorcycle Twin-Clamp Cable Oiler
• Suitable for most motorcycle wheels.
• Includes two cones and spindle for precise, easy alignment and balancing.
• Uses gravity to find the heavy point of a wheel and tyre.
• Model No. VS1819• Professional motorcycle wheel balancer.
• Suitable for most motorcycle wheels.
• Includes two cones and spindle for precise, easy alignment and balancing.
• Uses gravity to find the heavy point of a wheel and tyre.Motorcycle Wheel Balancer
• 110° Angled head gives improved access to hard to reach areas.
• One turn of handle equals one turn of slotted blade.
• Blade tip height is adjustable allowing it to be set in place during operation.
• Model No. MS013• 460mm Tool gives deep access particularly suited to adjustment of motorcycle carburettors.
• 110° Angled head gives improved access to hard to reach areas.
• One turn of handle equals one turn of slotted blade.
• Blade tip height is adjustable allowing it to be set in place during operation.Pilot Screw Adjusting Tool
• Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers.
• Model No. VS1807• Moulded protectors with connecting cord, designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers.2pc Rim Protector
• Suitable for adjusting spoke tension and removing/installing new spokes.
• Model No. MS037• Specially designed spoke wrench with 6 different sizes.
• Suitable for adjusting spoke tension and removing/installing new spokes.Spoke Wrench
• Suitable for adjusting spoke tension and correcting buckled wheels.
• Supplied in carry-case.
• Model No. VS1810• Specially designed spoke wrench with nine interchangeable sized heads.
• Suitable for adjusting spoke tension and correcting buckled wheels.
• Supplied in carry-case.10pc Spoke Wrench Set
• Includes seven dies for bearing sizes ranging from 32 to 46mm.
• Bearing setting bar features seven increments.
• Comfort grip T-handle rotates separately from the press plate for smooth bearing installation.
• Bearing seating tool provided to finish installation.
• Model No. VS1815• Aluminium kit suitable for straight installation of bearings to headstock.
• Includes seven dies for bearing sizes ranging from 32 to 46mm.
• Bearing setting bar features seven increments.
• Comfort grip T-handle rotates separately from the press plate for smooth bearing installation.
• Bearing seating tool provided to finish installation.Motorcycle Steering Bearing Press
• Includes three aluminium dies and driver bar, to be used in conjunction with a soft head hammer.
• Model No. VS1831• Safe and easy way to install lower steering bearing.
• Includes three aluminium dies and driver bar, to be used in conjunction with a soft head hammer.Steering Tube Bearing Installer
• Lever action with parallel linkage keeps head at the optimum angle for breaking the bead.
• Model No. TC968• Bench mounting manual bead breaker, especially suitable for motorcycle tyres.
• Lever action with parallel linkage keeps head at the optimum angle for breaking the bead.Tyre Bead Breaker
• Two sizes of pins 5mm one side and 9mm the other, with centre to centre distance ranging from 23mm to 227mm.
• Features a locking adjustment screw to keep tool at required set size.
• PVC Dipped handles for extra grip and comfort when in use.
• Model No. MS039• Suitable for holding flywheels and pulleys during removal and installation.
• Two sizes of pins 5mm one side and 9mm the other, with centre to centre distance ranging from 23mm to 227mm.
• Features a locking adjustment screw to keep tool at required set size.
• PVC Dipped handles for extra grip and comfort when in use.Universal Pulley Holding Tool - 5 & 9mm Pins