Engine
• Sizes: 0.0015" to 0.035".
• Dual marked in Imperial and Metric.
• Blade dimensions 75 x 13mm.
• Model No. VS512• Imperial graduated 35 blade feeler gauge.
• Dual marked in Imperial and Metric.
• Blade dimensions 75 x 13mm.35 Blade Feeler Gauge - Dual Marked
• 8 Popular sizes covered in one tool.
• Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm.
• Suitable for drain plugs on engine, gearbox and back axle.
• Model No. VS650• The right size drain plug key always in your hand.
• 8 Popular sizes covered in one tool.
• Suitable for drain plugs on engine, gearbox and back axle.8-in-1 Oil Drain Plug Wrench
• Applications: Sealey Presses YK10B, YK10BLG, YK10F, YK10FLG, YK15, YK15BM, YK15FM, YK20, YK209F, YK309FAH, YK30F and others with a Ø50mm ram.
• Model No. OFCA50• Adaptor allows OFC1 to be used with a wide range of bench and floor presses having Ø50mm rams.Adaptor for Oil Filter Crusher Ø50 x 115mm
• Applications: Sealey Presses YK10BM, YK15BLG, YK30, YK30FAH, YK30FAHFP, YK30FM, YK50FAH, YK50FM and others with a Ø60mm ram.
• Model No. OFCA60• Adaptor allows OFC1 to be used with a wide range of bench and floor presses having Ø60mm rams.Adaptor for Oil Filter Crusher Ø60 x 115mm
• Ingenious swivel action allows quick selection of correct sized tool.
• Model No. VS045• Die-cast tools suitable for press-type quick disconnection joints found on Chrysler, Ford & Vauxhall/Opel vehicles.
• Ingenious swivel action allows quick selection of correct sized tool.2pc Air Conditioning & Fuel Disconnection Tool Set
• Locking action prevents spray when disconnecting lines.
• Suitable for most Chrysler, Ford and Vauxhall/Opel vehicles.
• Model No. VS0454• Spring type coupling connectors for air conditioning lines.
• Locking action prevents spray when disconnecting lines.
• Suitable for most Chrysler, Ford and Vauxhall/Opel vehicles.4pc Air Conditioning Spring Lock Coupling Tool Set
• Locking action prevents spray when disconnecting lines.
• Suitable for most Vauxhall/Opel vehicles.
• Sizes: 3/8", 1/2", 5/8", 3/4".
• Model No. VS0456• Spring type coupling connectors for air conditioning lines.
• Locking action prevents spray when disconnecting lines.
• Suitable for most Vauxhall/Opel vehicles.4pc Air Conditioning Spring Lock Coupling Tool Set - Vauxhall/Opel
• 40ltr Capacity tank suitable for petrol or diesel.
• Supplied with suction tubes and adaptors for breaking into vehicle fuel system.
• CE Certified (971231EC).
• Model No. TP200S• Stainless steel fuel drainer with venturi type suction.
• 40ltr Capacity tank suitable for petrol or diesel.
• Supplied with suction tubes and adaptors for breaking into vehicle fuel system.
• CE Certified (971231EC).40ltr Air Operated Fuel Drainer - Stainless Steel
• Air pump uses regulated (72-100psi) workshop air supply.
• Designed to fully empty both tank and fuel lines of petrol or diesel.
• Includes three fuel line hoses.
• 40ltr Drain tank built into trolley.
• Mandatory equipment for VBRA members.
• Model No. TP200• Fully mobile unit on rigid metal trolley.
• Air pump uses regulated (70-100psi) workshop air supply.
• Designed to fully empty both tank and fuel lines of petrol or diesel.
• Includes three fuel line hoses.
• 40ltr Drain tank built into trolley.
• Mandatory equipment for VBRA members.40ltr Air Operated Fuel Drainer
• One turn of handle equals one turn of blade.
• Includes 90° and straight gearboxes.
• Contents: Slotted Bits; 5mm x 25, 28, 36, 58, 95mm, Phillips Bits; #1, #2, #3 x 60mm, #1, #2, #3 x 35mm, Interchangeable Head with 5mm Slotted Fixed Bit, Bit Adaptor, Handle, Shaft with Rotating Handle.
• Model No. VS0530• Deep access tool particularly suited to adjustment of motorcycle carburettors.
• One turn of handle equals one turn of blade.
• Includes 90° and straight gearboxes.
• Supplied with set of driver bits.Angle Driver - Carburettor Adjustment Tool Set
• Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer’s exact specification.
• Supplied with fully adjustable reaction arm.
• Essential measuring tool for the busy workshop.
• Model No. VS530• Designed to be used with any 1/2"Sq drive torque wrench.
• Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer’s exact specification.
• Supplied with fully adjustable reaction arm.
• Essential measuring tool for the busy workshop.Angular Torque Gauge 1/2"Sq Drive
• Allows operator to accurately tighten fixing to manufacturers’ exact specification.
• Model No. VS531• Designed to be used with any 1/2"Sq drive torque wrench.
• Allows operator to accurately tighten fixing to manufacturer’s exact specification.
• Essential measuring tool for the busy workshop.Angular Torque Gauge 1/2"Sq Drive
• Can also be used to calibrate the driver's instrument panel.
• Will also check the engine oil level on Audi; A4/A5 3.2 6-cylinder engines.
• Model No. VS600ED• Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.
• Can also be used to calibrate the driver's instrument panel.
• Will also check the engine oil level on Audi; A4/A5 3.2 6-cylinder engines.600mm Engine Dipstick - Audi
• Inspection of this type can avoid costly and unnecessary dismantling of the cylinder head.
• Features an obedient probe with an illuminated camera head diameter of just 4.5mm - suitable for most small engine applications.
• Rugged handset with IP64 dust/water rating includes controls for the LED probe lighting and camera zoom.
• Live images from the camera head are displayed on a crystal clear screen and may be viewed/saved externally using the AV cable supplied.
• Optional Ø3.9mm probes in either forward view or side view configuration are available as an option.
• Supplied in a carry-case.
• Uses 4 x AA batteries (supplied).
• Model No. VS8200• Suitable for internal inspection of modern small diesel engines where access to the cylinder can be quickly made through the aperture left by removal of the glow plug.
• Inspection of this type can avoid costly and unnecessary dismantling of the cylinder head.
• Features an obedient probe with an illuminated camera head diameter of just 4.5mm - suitable for most small engine applications.
• Rugged handset with IP64 dust/water rating includes controls for the LED probe lighting and camera zoom.
• Live images from the camera head are displayed on a crystal clear screen and may be viewed/saved externally using the AV cable supplied.
• Optional Ø3.9mm probes in either forward view or side view configuration are available as an option.
• Supplied in a carry-case.
• Uses 4 x AA batteries (supplied).Borescope Pro - Diesel Engine Kit - Ø4.5mm Probe
• Set includes two adaptors for different removal methods.
• The first screws onto the injector cap and the second locates internally inside the injector allowing extra force to be used.
• Features a flexible joint allowing the slide hammer to be used in restricted areas.
• Supplied with instructions in carry-case.
• Model No. VS2049• Suitable for the removal of stubborn Bosch/Delphi diesel injectors.
• Set includes two adaptors for different removal methods.
• The first screws onto the injector cap and the second locates internally inside the injector allowing extra force to be used.
• Features a flexible joint allowing the slide hammer to be used in restricted areas.
• Supplied with instructions in carry-case.Bosch/Delphi Diesel Injector Puller
• Supplied with set of long and short carburettor adaptors.
• Includes four 1500mm delivery tubes and hanging loop for the gauge bank.
• Maximum Vacuum: 76cmHg.
• Supplied in carry-case.
• Model No. VS209• One of the most comprehensive balancer sets available on the market.
• Features a bank of four mini-gauges with lockable valves enabling user to hold vacuum values in use.
• Supplied with set of long and short carburettor adaptors for easy access amongst the tubes and wires around the carburettor.
• Includes four 1500mm delivery tubes and hanging loop for the gauge bank.
• Supplied in carry-case.Carburettor Synchronizer (Vacuum, Mini-Type)
• Battery operated, hand-held tester which quickly and easily diagnoses if a COP is producing a suitable spark to the plug.
• Simply place the pad on the COP while the engine is running.
• Features sound and visual signal recognition.
• Model No. VS5270• Designed to test the COP (Coil On Plug) on modern vehicles.
• Battery operated, hand-held tester which quickly and easily diagnoses if a COP is producing a suitable spark to the plug.
• Simply place the pad on the COP while the engine is running.
• Features sound and visual signal recognition.Coil On Plug Tester
• Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use.
• Valve assembly maintains cylinder pressure when air supply is cut.
• Requires a 90-125psi supply.
• Requires standard bayonet air line coupling (not supplied).
• Model No. VS1601• Use with the VS160 to hold the valves closed whilst spring is compressed.
• Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use.
• Valve assembly maintains cylinder pressure when air supply is cut.
• Requires a 90-125psi supply.
• Requires standard bayonet air line coupling (not supplied).Compressed Air Adaptor
• Cone type spark plug connection on angled rigid 130mm extension aids quick installation on most petrol engines, including motorcycle and small portable power units.
• Model No. CT953• Fitted with Ø63mm gauge reading up to 300psi and 20kg/cm².
• Cone type spark plug connection on angled rigid 130mm extension aids quick installation on most petrol engines, including motorcycle and small portable power units.Compression Tester Push-On Type with Angled Stem
• Cone type spark plug connection on straight rigid 130mm extension aids quick installation on most petrol engines, including motorcycle and small portable power units.
• Model No. CT954• Fitted with Ø63mm gauge reading up to 300psi and 20kg/cm².
• Cone type spark plug connection on straight rigid 130mm extension aids quick installation on most petrol engines, including motorcycle and small portable power units.Compression Tester Push-On Type with Straight Stem
• Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure.
• Suitable for use with any petrol vehicle with 10, 12 or 14mm spark plugs.
• Supplied in carry-case with instructions.
• Model No. VSE2020• Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cylinder head cracks and blown head gaskets.
• Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure.
• Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs.
• Supplied in carry-case with instructions.Petrol Engine Cylinder Leakage Tester 2-Gauge
• Shank Ø: 6mm.
• Model No. VS1801• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.
• Shank Ø: 6mm.2pc Decarbonising Brush Set
• Features a terminal description and location for each of the 16 pins in relation to the socket.
• Lists over 500 common model types.
• Model No. DSLMPLEASE NOTE: THIS PRODUCT IS ZERO RATED FOR VAT
The VAT inclusive price indicated is system generated
• Handy time saving manual which shows the location of the EOBD 16 pin diagnostic socket, using photographs of the cockpit area and line drawings.
• Features a terminal description and location for each of the 16 pins in relation to the socket.
• Lists over 500 common model types.Diagnostic Socket Location Manual
• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.
• Includes TDC finder, ideal for use when the engine has no crankshaft timing marks.
• Supplied in tough carry-case.
• See Sealey website for complete vehicle applications.
• Model No. VSE3156• A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles.
• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.
• Includes TDC finder, ideal for use when the engine has no crankshaft timing marks.
• Supplied in tough carry-case.Diesel & Petrol Compression, Leakage & TDC Kit
• Use after diesel filter change, drainage of fuel tank or any other disturbance of the fuel system.
• Supplied with two fuel pipe clips.
• Suitable for 9mm bore hose.
• Model No. VSE055• Required for priming injection pump following diesel filter change, drainage of fuel tank or any other disturbance of the fuel system.
• Supplied with two fuel pipe clips.Diesel & Petrol Fuel Pump Priming Tool
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
• See Sealey website for complete vehicle applications.
• Model No. VSE3153• Diesel engine glow plug compression test adaptor kit that covers a wide range of Alfa Romeo, Fiat, Honda and Vauxhall/Opel vehicles.
• Some of these adaptors are also suitable for other manufacturers.
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).Diesel Compression Adaptor Kit - Alfa Romeo, Fiat, Honda, Vauxhall/Opel
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
• See Sealey website for complete vehicle applications.
• Model No. VSE3151• Diesel engine glow plug compression test adaptor kit that covers a wide range of BMW, Mercedes, Rover and VAG vehicles.
• Some of these adaptors are also suitable for other manufacturers.
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).Diesel Compression Adaptor Kit - BMW, Mercedes, Rover, VAG
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
• See Sealey website for complete vehicle applications.
• Model No. VSE3152• Diesel engine glow plug compression test adaptor kit that covers a wide range of Ford, Mazda and PSA vehicles.
• Some of these adaptors are also suitable for other manufacturers.
• For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).Diesel Compression Adaptor Kit - Ford, Mazda, PSA
• Features TDC finder which connects onto glow plug adaptors.
• Supplied in carry-case with extra storage space.
• Model No. VSE3157• Diesel engine compression gauge reading up to 600psi, used in conjunction with Sealey glow plug adaptor kits (Model No's VSE3151, VSE3152, VSE3153).
• Features TDC finder which connects onto glow plug adaptors.
• Supplied in carry-case with extra storage space.Diesel Compression Gauge, Hose & TDC Base Kit
• Suitable for testing cars and light commercial vehicles with direct or indirect injection.
• Pressure relief valve allows repeated on-vehicle tests.
• Includes 90° coupling adaptor for limited access applications.
• Supplied in carry-case.
• Model No. VSE204• Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector.
• Suitable for testing cars and light commercial vehicles with direct or indirect injection.
• Pressure relief valve allows repeated on-vehicle tests.
• Includes 90° coupling adaptor for limited access applications.
• Supplied in carry-case.Diesel Engine Compression Test Kit
• Large Ø70mm, 70bar(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and a range of glow plug and injector adaptors enable this kit to cover most popular cars and vans.
• Supplied in carry-case with preformed liner and foam filled lid.
• Model No. VS2042• Includes five glow plug adaptors and five injector adaptors.
• Large Ø70mm, 70bar(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and a range of glow plug and injector adaptors enable this kit to cover most popular cars and vans.
• Supplied in carry-case with preformed liner and foam filled lid.Diesel Engine Compression Test Kit - Popular
• Large, Ø70mm, 70bar(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors.
• Kit covers the vast majority of car, van, truck, bus, agricultural and marine diesel engines.
• Supplied in carry-case with preformed liner and foam filled lid.
• Model No. VS2044• As Model No. VS2043 but with the additional clamp-on injector adaptors.
• The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines.
• Supplied in carry-case with preformed liner and foam filled lid.Diesel Engine Compression Tool Kit - Master
• Must be used whenever fuel system is disturbed.
• Model No. VS055• Essential for reintroduction of fuel into fuel pump following maintenance such as fitting of new diesel filter or following drainage of fuel tank.
• Must be used whenever fuel system is disturbed.Diesel Injection System Priming Device
• Features rubber inserts for retention of plug in socket.
• Socket Sizes: 8, 10, 12mm.
• Set includes 75mm extension bar.
• Supplied in storage case.
• Model No. SX0402• Popular glow plug sized Chrome Vanadium steel sockets with universal joints for simple replacement.
• Features rubber inserts for retention of plug in socket.
• Set includes 75mm extension bar.
• Supplied in storage case.4pc 3/8"Sq Drive Diesel Glow Plug Socket Set
• Identifies worn, blocked or inoperative injectors quickly and easily.
• Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
• Master kit includes range of adaptors to suit Bosch, Delphi & Denso injectors for comprehensive coverage of common rail diesel vehicles.
• Supplied in carry-case.
• Model No. VS2048• Designed to measure return fuel flow on diesel vehicles up to 6 cylinders fitted with common rail injection system.
• Identifies worn, blocked or inoperative injectors quickly and easily.
• Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
• Master kit includes range of adaptors to suit Bosch, Delphi & Denso injectors for comprehensive coverage of common rail diesel vehicles.
• Supplied in carry-case.Diesel Injection Leak Back Master Kit - Bosch/Delphi/Denso
• Supplied in carry-case.
• Model No. VS2045• Slide hammer extractor with thread adaptors to suit Bosch and Lucas diesel injectors fitted to cars and light commercial vehicles.
• Supplied in carry-case.Diesel Injector Extractor - M8, M12, M14
• Identifies, worn, blocked or inoperative injectors quickly and easily.
• Supplied with measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
• Supplied in carry-case.
• Model No. VS2046• Designed to measure return fuel flow on diesel vehicles up to 6 cylinders fitted with common rail injection system.
• Identifies, worn, blocked or inoperative injectors quickly and easily.
• Supplied with measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation.
• Supplied in carry-case.Diesel Injector Flow Test Kit - Common Rail
• Compatible with Bosch, Delphi, Denso and Siemens injectors.
• Model No. VS2063• Used to remove the injector nozzle, when servicing/cleaning diesel injectors.
• Compatible with Bosch, Delphi, Denso and Siemens injectors.Diesel Injector Nozzle Puller
• Fitted with Ø88mm gauge with rubber bumper reading both psi and Bar.
• Ideal for checking of atomisation pattern and opening pressure.
• Transparent reservoir fitted with fine filter and unit supplied with two injector connection pipes.
• Model No. VS2058• Enables the testing of injectors under pressure.
• Fitted with Ø88mm gauge with rubber bumper reading both PSI and Bar.
• Ideal for checking of atomisation pattern and opening pressure.
• Transparent reservoir fitted with fine filter and unit supplied with two injector connection pipes.Injector Nozzle Tester - Diesel
• Allows the removal of seized injectors without the need to remove the cylinder head.
• Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector.
• Supplied in carry-case.
• Model No. VS2005• Comprehensive set for removing Citroen/Peugeot 2.0/2.2HDi 16v fuel injectors.
• Allows the removal of seized injectors without the need to remove the cylinder head.
• Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector.
• Supplied in carry-case.Diesel Injector Puller - Citroen, Peugeot