Strut Brace

Three-Piece Racingline Aluminium front strut brace.



Fits
Porsche 981 Boxster - 2012 to 2016

Racingline
Racingline is the label for an assorted range of high quality strut bars. These CNC milled threaded pieces and laser cut parts ensure extremely accurate adjustments.

Racingline products are available in either polished aluminium or carbon fibre coated. With this strut bar you will get the highest level of technical and optical performance.

Strut braces provide additional stability to the car body. This results in more precise steering and improved directional stability due to reduced torsion of the car body.

Wiechers strut braces are adapted for production vehicles. These are absolutely true to size and made of high quality steel.
We offer strut braces either made of steel vanished red or made of high gloss polished aluminium.

In some cases, the steel strut can hit the filler neck of the air conditioning system

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36700

The product you are viewing cross references to these numbers

Ultra Racing Front Lower Bar / Front Member Brace
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Lower Bar / Front Member Brace
Specification: 3 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Strut Brace.
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Strut Brace.
Specification: 2 Points



Fits:
Porsche 987 Boxster

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Middle Lower Bar / Middle Member Brace
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Rear Lower Bar / Rear Member Brace
Specification: 4 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

  

Fits:
Porsche 981 Cayman
Porsche 981 Boxster

Requires trimming of the plastic tray under the 718 and 718 GT4

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Note: Pictures may not show actual product.

Rennline Strut tower brace - 2 point. FRONT.

Fits:
Porsche 986 Boxster 1997-04
Porsche 996 1998-05

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Both the strut bar and brackets are constructed from aircraft grade aluminum, and include stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. This strut brace does allow the use of your plastic cowl cover.

Note: Pictures may not show actual product.

Rennline Strut tower brace - 2 point. FRONT.

Fits:
Porsche 997 2005>>
Porsche 987 Boxster 2005>>
Porsche 987 Cayman 2005>>

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Both the strut bar and brackets are constructed from aircraft grade aluminum, and include stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. This strut brace does allow the use of your plastic cowl cover but small alteration would be required.

Please note some cars might require the ends of the brace cut by approx 10mm each side in order to fit the bar on towers. This might be depending on the location of your top mounts.

Note: Pictures may not show actual product.

Fits:
Porsche 996 1997-04 FRONT
Porsche 986 Boxster 1997-04 FRONT



DesignTek Front Strut Braces Finished in light weight but very strong carbon fibre tubing. Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven car - Increase your driving experience and become one with the road.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360210986

The product you are viewing cross references to these numbers

DesignTek Front Strut Braces Finished in light weight but very strong alloy. Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven. Increase your driving experience and become one with the road.



Fits:
Porsche 997 / 997S
Porsche 987 Boxster
Porsche 987C Cayman