Top mounts Rear
Refine by Car Type
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
Filter by brand
Rear Monoball Shock Mount - Set Of 2 for Porsche Boxster 986 / 987
Code: 986RSMT
Rear Monoball Shock Mount - Set of 2 for Porsche Boxster 986 / 987
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
986RSMT
The product you are viewing cross references to these numbers
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
986RSMT
986RSMT
98733305900
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
£507.00
Now £496.86
In stock 
Rear Monoball Shock Mount FLAT STYLE. Porsche 986/987/981 Tarett
Code: 98XRSMT
Rear Monoball Shock Mount. Sold as pair.
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98XRSMT
The product you are viewing cross references to these numbers
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98XRSMT
981RSMT
98733305900
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£359.00
Now £351.82
In stock
Rear monoball shock top mount - Set of 2 for Porsche 986 / 987.1 / 987.2
Code: 360250986R
Rear monoball shock mount - Set of 2
Fits:
Porsche 986 Boxster
Porsche 987.1 Boxster
Porsche 987.2 Boxster
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360250986R
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster
Porsche 987.1 Boxster
Porsche 987.2 Boxster
Porsche 987C.1 Cayman
Porsche 987C.2 Cayman
Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts.
CNC machined 6061 anodized aluminum construction with stainless steel hardware.
Reduces rear wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.
Increased monoball life due to spring load being distributed over the domed housing.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
360250986R
98633305903
98633305904
98633305906
98733305900
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£350.00
Now £343.00
In stock
Strut top mount monoball cartridge. Porsche 986/987/996/997
Code: 2011002
Strut top mount monoball cartridge.
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
The product you are viewing cross references to these numbers
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2011002
2011002
99634301804
99734301801
99734301800
99734301801
99634398008
99634398037
98633305903
98733305900
98633305904
98733305900
98633305906
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£390.00
Now £382.20
Orderable
DISPLAYING 1 to 4 (of 4 products)
Also found on these pages
About Top mounts Rear
Enhance Your Porsche Rear Suspension with Performance Rear Top Mounts: Technical Specifications and Benefits
Technical specifications of Performance Rear Suspension Top Mounts:
- Performance rear suspension top mounts, also known as strut mounts or bearing plates, are components that connect the rear suspension struts to the chassis of a Porsche.
- They are specifically designed for the rear suspension system of Porsche vehicles.
- Performance rear top mounts are made from high-quality materials such as aluminum alloy or reinforced rubber.
- They feature a stiffer construction and improved design compared to standard mounts, providing enhanced performance, durability, and handling characteristics.
- Performance rear suspension top mounts are available as aftermarket upgrades or standard replacements for Porsche vehicles.
Benefits of upgrading or replacing Performance Rear Suspension Top Mounts for your Porsche:
Improved rear suspension performance: Performance rear top mounts offer increased rigidity and precision, enhancing the rear suspension's performance and responsiveness during cornering, acceleration, and braking.
Enhanced stability and control: Upgrading to performance mounts improves the overall stability and control of the rear suspension, providing a more confident and composed driving experience.
Reduced noise, vibration, and harshness (NVH): Stiffer rear top mounts help minimize unwanted vibrations and noise transmitted to the chassis, resulting in a smoother and more comfortable ride.
Precise alignment adjustments: Performance rear top mounts allow for precise alignment adjustments, optimizing the rear suspension geometry for improved tire wear, traction, and cornering performance.
Increased durability: Performance rear top mounts are designed to withstand higher loads and provide increased durability compared to standard mounts, ensuring longevity even under demanding driving conditions.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance rear suspension top mounts specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our knowledgeable team can assist you in selecting the appropriate rear top mounts based on your Porsche model, year, and specific rear suspension requirements. We understand the importance of finding the right balance between performance and comfort, and we can guide you in choosing the optimal top mounts that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's rear suspension performance, handling, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.
You may also like
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Control Arms Rear
-
Drop links Front
-
Drop links Rear
-
Engine mounts
-
Gearbox mounts
-
Top mounts Front
-
Steering Track Rods
-
Rear Sub Frame
-
Air Lift System
-
Suspension Control Units
-
Roll Cages
-
Bilstein B4 Standard Replacement
-
Bilstein B4 (Cars with PASM Button)
-
Bilstein SPORT B6 Dampers
-
Bilstein SPORT B6 (Cars with PASM Button)
-
Bilstein SPRINT B8 Dampers
-
Bilstein SPRINT B8 (Cars with PASM Button)
-
Bilstein B12 Tuning Suspension Kit
-
Bilstein B14 PSS Coilover Suspension Kits
-
Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
-
Bilstein B16 DampTronic (PASM)
-
Bilstein EVO SE
-
Ohlins Road & Track Suspension
-
Koni Sports
-
Koni Special Active
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Black Series Bushes
-
DesignTek D220 Coilover Suspension Kit
-
H&R Adjustable Suspension Kits
-
H&R Cup-Kit Sport Suspension
-
KW Height Adjustable Springs
-
KW Variant 1 Inox Suspension kits
-
KW Variant 2 Inox Adjustable Rebound Damping Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
KW HLS (Hydraulic Lift System)
-
Porsche Kits
-
KYB Suspension
-
Sachs Performance Suspension CSS
-
Nitron Automotive Range
Popular Models
