Jacking Beams

Sealey Extension Lift Adaptor 100mm (Pair)Extension adaptors for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.• 100mm Extension adaptor for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP
• Model No. SJBEXLP100A• 100mm Extension adaptor for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.100mm Extension Lift Adaptor (Pair)

Sealey Flat Arm Set - Spring LoadedSpring loaded flat arms with roller bearings for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.• Spring loaded flat arms with roller bearings for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP
• Model No. SJBEXLPFLA• Spring loaded flat arms with roller bearings for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP.Flat Arm Set - Spring Loaded

Sealey Jacking Beam 2tonne Low Profile with Arm Extenders & Roller SupportsLow profile design permits use on lifts mounted in pits and commonly used in ATL's. Also permits use on vehicles with low ground clearance. Fitted with large diameter roller support arms for use on lifts with inner rail type configuration. Ultra wide configuration arms extend to 1.6mtr and feature adjustable saddles with interchangeable height posts (optional). Tried and tested hydraulic system with double stroke pump and two-stage mechanical safety lock for added safety.• Beam Lift: 35-380mm.
• Low profile design permits use on lifts mounted in pits and commonly used in ATLs.
• Also permits use on vehicles with low ground clearance.
• Fitted with large diameter roller support arms for use on lifts with inner rail type configuration.
• Ultra wide configuration arms extend to 1.65mtr and feature adjustable saddles with interchangeable height posts (optional).
• Tried and tested hydraulic system with double stroke pump and two-stage mechanical safety lock for added safety.
• Model No. SJBEX200LP• Low profile design permits use on lifts mounted in pits and commonly used in ATLs.
• Also permits use on vehicles with low ground clearance.
• Fitted with large diameter roller support arms for use on lifts with inner rail type configuration.
• Ultra wide configuration arms extend to 1.6mtr and feature adjustable saddles with interchangeable height posts (optional).
• Tried and tested hydraulic system with double stroke pump and two-stage mechanical safety lock for added safety.2tonne Wide Arm Low Profile Jacking Beam

Sealey Jacking Beam 3tonne with Arm Extenders & Flat Roller Supports2tonne Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings. When unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp. When loaded, they firmly stabilise the unit. Optional hook arms supplied. Wide lift configuration meets VOSA recommendation for lifting on jacking point.• 3tonne Capacity, fully certified and approved to comply with VOSA requirements.
• 1.6mtr Load arm reach.
• Beam Lift: 95-300mm.
• Two-stage mechanical safety lock and telescopic finger guards.
• Spring loaded flat arms with roller bearings.
• Optional hook arms supplied.
• Supplied with two pairs of aluminium support blocks.
• Wide lift configuration meets VOSA recommendation for lifting on jacking point.
• Model No. SJBEX300• 3tonne Capacity and fully certified and approved to comply with VOSA requirements.
• Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.
• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.
• Optional hook arms supplied.
• Wide lift configuration meets VOSA recommendation for lifting on jacking point.3tonne Jacking Beam with 1.6mtr Extending Arms & Flat Roller Supports