Transmission Jacks - Vertical

Sealey Adjustable Gearbox Support 1000kg Capacity for 1000TR, 1000TRQ, 1250TRFully adjustable saddle with forward, backward and side-to-side tilt.• A fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for use with Model No's. 1000TR, 1000TRQ, 1250TR.
• Model No. ADT5• A fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for use with Model No's. 1000TR, 1000TRQ, 1250TR.Adjustable Gearbox Support 1000kg Capacity for 1000TR & 1250TR

Sealey Adjustable Gearbox Support 500kg Capacity for 300ETJ & 500ETJFully adjustable saddle with forward, backward and side-to-side tilt.• A fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for use with Model Nos. 300ETJ, 500ETJ.
• Model No. ADT7• A fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for use with Model Nos. 300ETJ, 500ETJ.500kg Capacity Adjustable Gearbox Support for 300ETJ & 500ETJ

Sealey Adjustable Gearbox Support 500kg Capacity for 300TR, 300TRQ, 600TR, 600TRQFully adjustable saddle with forward, backward and side-to-side tilt.• A fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.
• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.
• Model No. ADT3• A fully adjustable saddle with forward, backward and side-to-side tilt.

• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Adjustable Gearbox Support 500kg Capacity

Sealey Drain Pan Holder for Vertical Transmission JacksAdjustable width jaws hold Sealey Drain Pans Model No's DRP01 to DRP05, converting a transmission jack into an oil drainer for pit or under lift use. Holder simply replaces jack saddle in seconds. Suitable for all current Sealey transmission jacks.• Adjustable width jaws hold Sealey Drain Pans DRP01 to DRP05, converting a transmission jack into an oil drainer for pit or under lift use.
• Holder simply replaces jack saddle in seconds.
• Suitable for all current Sealey transmission jacks.
• Maximum Jaw Opening: 410mm
• Minimum Jaw Opening: 80mm
• Minimum/Maximum Shaft Ø: 20/35mm
• Model No. DPH09• Adjustable width jaws hold Sealey Drain Pans DRP01 to DRP05, converting a transmission jack into an oil drainer for pit or under lift use.
• Holder simply replaces jack saddle in seconds.
• Suitable for all current Sealey transmission jacks.Drain Pan Holder for Vertical Transmission Jacks

Sealey Transmission Jack 0.3tonne VerticalManufactured to exacting standards and suitable for general workshop applications. Model features dead man's handle for added safety and strong construction for durability. Hydraulic unit slightly smaller than other models in the range for economy. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1138/1965mm.
• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Highly manoeuvrable on castors.
• Model No. 300ETJ• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Highly manoeuvrable on castors.0.3tonne Vertical Transmission Jack

Sealey Transmission Jack 0.3tonne VerticalManufactured to exacting standards, strong construction for durability and suitable for general workshop applications. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Extra large castors allow for increased manoeuvrability. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1120/1940mm.
• Features high speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Model No. 300TR• Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Can be fitted with Sealey Model No. ADT3 - Adjustable Gearbox Support.0.3tonne Vertical Transmission Jack

Sealey Transmission Jack 0.3tonne Vertical Quick LiftThese transmission jacks feature Quick Lift to reduce the time and effort needed to get saddle to gearbox. Single foot pedal operation keeps hands free during lifting process. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions. Castors and side handle make the units easily manoeuvrable. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1125/1950mm.
• Quick Lift feature to reduce time and effort.
• Only a maximum of 20 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.
• Castors and side handle for easy manoeuvrability.
• Suitable for use with Optional Adjustable Gearbox Support - Sealey Model No: ADT3.
• Model No. 300TRQ• Quick Lift feature to reduce the time and effort needed to get saddle to gearbox.
• Only a maximum of 20 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Castors and side handle make the units easily manoeuvrable.
• Suitable for use with Optional Adjustable Gearbox Support - Sealey Model No: ADT3.0.3tonne Vertical Transmission Jack with Quick Lift

Sealey Transmission Jack 0.5tonne VerticalManufactured to exacting standards and suitable for general workshop applications. Model features dead man's handle for added safety and strong construction for durability. Hydraulic unit slightly smaller than other models in the range for economy. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1138/1965mm.
• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Highly manoeuvrable on castors.
• Model No. 500ETJ• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Highly manoeuvrable on castors.0.5tonne Vertical Transmission Jack

Sealey Transmission Jack 0.5tonne Vertical TelescopicTelescopic 2-stage models for reduced clearance lifts. Featuring high speed lift to gearbox - just lift piston. Foot pedal operation keeps hands free. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Highly manoeuvrable on castors.• Min./Max. Saddle Height: 800/1880mm.
• High-speed lift to gearbox.
• Foot pedal operation keeps hands free for aligning saddle with transmission via saddle adjustment.
• Spring loaded dead man's safety release control reduces risk of inadvertent lowering.
• Highly manoeuvrable on castors.
• Model No. 500TTJ• Telescopic 2-stage models for reduced clearance lifts.
• Featuring high speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Highly manoeuvrable on castors.0.5tonne Telescopic Vertical Transmission Jack

Sealey Transmission Jack 0.6tonne VerticalManufactured to exacting standards, strong construction for durability and suitable for general workshop applications. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Extra large castors allow for increased manoeuvrability. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1175/1985mm.
• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Model No. 600TR• Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Can be fitted with Sealey Model No. ADT3 - Adjustable Gearbox Support.0.6tonne Vertical Transmission Jack

Sealey Transmission Jack 0.6tonne Vertical Quick LiftThese transmission jacks feature Quick Lift to reduce the time and effort needed to get saddle to gearbox. Single foot pedal operation keeps hands free during lifting process. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions. Castors and side handle make the units easily manoeuvrable. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1125/1950mm.
• Quick Lift feature to reduce time and effort.
• Only a maximum of 30 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.
• Castors and side handle for easy manoeuvrability.
• Suitable for use with Optional Adjustable Gearbox Supports - Sealey Model No's: ADT1, ADT2, ADT3.
• Model No. 600TRQ• Quick Lift feature to reduce the time and effort needed to get saddle to gearbox.
• Only a maximum of 30 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.
• Castors and side handle make the units easily manoeuvrable.
• Suitable for use with Optional Adjustable Gearbox Support - Sealey Model No. ADT3.0.6tonne Vertical Transmission Jack with Quick Lift

Sealey Transmission Jack 1tonne VerticalManufactured to exacting standards, strong construction for durability and suitable for general workshop applications. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Extra large castors allow for increased manoeuvrability. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1120/1950mm.
• High speed lift to gearbox - just lift piston.
• Foot pedal operation keeps hands free.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Model No. 1000TR• 1tonne Model manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Extra large castors allow for increased manoeuvrability.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Can be fitted with Sealey Model No. ADT5 - Adjustable Gearbox Support.1tonne Vertical Transmission Jack

Sealey Transmission Jack 1tonne Vertical Quick LiftThese transmission jacks feature Quick Lift to reduce the time and effort needed to get saddle to gearbox. Single foot pedal operation keeps hands free during lifting process. Spring loaded dead man's safety release control reduces the risk of inadvertent lowering. Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load. Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions. Castors and side handle make the units easily manoeuvrable. Hydraulic unit larger than the economy models for improved performance and durability. Can be fitted with Adjustable Gearbox Support - check specification in table.• Min./Max. Saddle Height: 1140/1960mm.
• Quick Lift feature to reduce time and effort.
• Only a maximum of 42 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.
• Castors wheels and side handle for easy manoeuvrable.
• Suitable for use with Optional Adjustable Gearbox Support - Sealey Model No's: ADT5.
• Model No. 1000TRQ• Quick Lift feature to reduce the time and effort needed to get saddle to gearbox.
• Only a maximum of 42 pumps needed to reach full height.
• Single foot pedal operation keeps hands free during lifting process.
• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.
• Two way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.
• Hydraulic unit larger than the economy models for improved performance and durability.
• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.
• Castors and side handle make the units easily manoeuvrable.
• Suitable for use with Optional Adjustable Gearbox Support - Sealey Model No's: ADT5.1tonne Vertical Transmission Jack with Quick Lift