Trolley Jacks
• Ideal for front wheel drive vehicles.
• Includes rubber covered saddles.
• Model No. X136• Provides extra safety when locating awkward jacking point.
• Ideal for front wheel drive vehicles.
• Includes rubber covered saddles.2tonne Cross Beam Adaptor
• Made from an EVA material which is oil resistant.
• Size (L x ID): 400 x 30mm.
• Applications: 3000CXD, 3030CXD, 3001LE, 3012CXD, 2800HL, 2150HL, 1500HQ, 5000LQ, 10000LQ.
• Model No. 3000CXDHS• Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle.
• Made from an EVA material which is oil resistant.400mm EVA Jack Handle Sleeve ID 30mm
• Chassis Length: 670mm.
• Single-piece hydraulic unit with heavy base design and large jacking saddle.
• Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point in 1-2 strokes.
• Universal joint release mechanism allows safer, more controlled lowering of the jack.
• Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.
• Suitable for loaded vans up to 3.5 tonne GVW.
• Model No. 3012CXD• Min./Max. Saddle Height: 145/520mm.
• Chassis Length: 670mm.
• Single-piece hydraulic unit with heavy base design and large jacking saddle.
• Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point in 1-2 strokes.
• Universal joint release mechanism allows safer, more controlled lowering of the jack.
• Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.
• Suitable for loaded vans up to 3.5 tonne GVW.3tonne Professional Trolley Jack Super Rocket Lift
• Model No. 3000CXD/JP• Prevents damage to the under side of the vehicle's jacking point.Rubber Safety Jack Pad for 3000CXD/3030CXD
• Model No. SSP223• Replacement safety rubber jack pad for 3003CXQ.Safety Rubber Jack Pad
• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 3000CXD and ADT200 - Maximum capacity is 200kg.
• Model No. ADT200• Fully adjustable saddle with forward, backward and side-to-side tilt.
• Suitable for use with 3000CXD, 3003CXQ, 3030CXD and 3080CX.200kg Capacity Transmission Cradle
• Heavy-duty chassis with one piece hydraulic unit.
• Handle mounted safety release prevents inadvertent lowering of load.
• Includes large diameter saddle for easier positioning under the jacking point.
• Fitted with safety overload valve.
• Fully CE approved for general workshop applications.
• Model No. 10QJ• Heavy-duty chassis with one-piece hydraulic unit.
• Handle mounted safety release prevents inadvertent lowering of load.
• Includes large diameter saddle for easier positioning under the jacking point.
• Fitted with safety overload valve.
• Fully CE approved for general workshop applications.10tonne Long Reach Trolley Jack
• Ideal for the garage or serious enthusiast.
• Suitable for 4x4s, cars or light commercial vehicles which require high ground clearance.
• Super Rocket Lift feature brings lifting arm into contact with jacking point in 1-2 strokes.
• Strong double rolled chassis configuration provides 1.2 metres of access, including the handle.
• Also suitable for loading bodyshop chassis jigs.
• Model No. 1025HL• Ideal for the garage or serious enthusiast.
• Suitable for 4x4s, cars or light commercial vehicles which require high ground clearance.
• Super Rocket Lift feature brings lifting arm into contact with jacking point in 1-2 strokes.
• Strong double rolled chassis configuration provides 1.2 metres of access, including the handle.
• Also suitable for loading bodyshop chassis jigs.2.25tonne High Lift Trolley Jack with Super Rocket Lift
• Chassis Length: 592mm.
• Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg.
• Mix of steel and aluminium not only makes this jack lightweight but incredibly strong.
• Large saddle with jacking pad.
• Rocket Lift with twin piston design enables saddle to be brought up to jacking point with minimal pumps.
• Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up.
• Model No. RJAS2500• Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg.
• Mix of steel and aluminium not only makes this jack lightweight but incredibly strong.
• Large saddle with jacking pad.
• Rocket Lift with twin piston design enables saddle to be brought up to jacking point with minimal pumps.
• Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up.2.5tonne Aluminium/Steel Trolley Jack with Rocket Lift
• High-lift jack arm with incredible low minimum access height of just 80mm.
• Fitted with quick lift foot pedal and dead man's control.
• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points.
• Fitted with one-piece hydraulic unit with built-in safety overload protection.
• Model No. 2200HL• High lift jack arm with incredible low access height of just 80mm.
• Fitted with quick lift foot pedal and dead man's control.
• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points.
• Fitted with one-piece hydraulic unit with built-in safety overload protection.2tonne High Lift Low Entry Trolley Jack
• Chassis Length: 560mm.
• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.
• Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars.
• Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.
• White saddle aids positioning under vehicle and safety valve prevents overloading.
• Model No. 1020LE• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.
• Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars.
• Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.
• White saddle aids positioning under vehicle and safety valve prevents overloading.2tonne Low Entry Trolley Jack
• Max. Chassis Height: 92mm.
• Low entry design to suit low-slung vehicles.
• One-piece hydraulic unit.
• Two-piece handle with integral cog type release mechanism.
• Super Rocket Lift feature brings lifting arm into contact with jacking point with two or less strokes of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty swivel castor wheels and Ø72mm x 44mm wide front wheels.
• Model No. 2000LEQ• Low entry design to suit low-slung vehicles.
• One-piece hydraulic unit.
• Two-piece handle with integral cog type release mechanism.
• Super Rocket Lift feature brings lifting arm into contact with jacking point with two or less strokes of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty swivel castor and Ø72mm x 44mm wide front wheels.2tonne Low Entry Trolley Jack with Super Rocket Lift
• Chassis Length: 450mm.
• Steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle and carry handle.
• Model No. 1050CX• Steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle and carry handle.2tonne Short Chassis Trolley Jack
• Chassis Length: 540mm.
• Fully portable professional model.
• Features American cog-type integral handle release mechanism with long 2-piece handle.
• Short chassis design with heavy-duty castors to assist in positioning the jack under the load.
• Weight: 21kg.
• Model No. 1250CX• Professional and fully portable 2tonne trolley jack.
• Features American cog-type integral handle release mechanism with long two-piece handle.
• Short chassis design with heavy-duty castors to assist in positioning the jack under the load.
• Fitted with safety overload valve.
• Compact design makes this jack equally suitable for workshop or recovery vehicle use.2tonne Professional Short Chassis Trolley Jack
• Min./Max. Saddle Height: 130/330mm.
• Max. Chassis Height: 140mm.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle and carry handle.
• Axle stands are constructed entirely from steel and fold flat for ease of storage.
• Fitted with double locking safety pin.
• Min./Max. Height: 275/365mm.
• Max. Capacity: 2tonne each, 4tonne pair.
• Supplied in carry/storage case.
• Model No. 1030CXDK• Jack features steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle.
• Folding axle stands are constructed entirely from steel and fold flat for easy storage.
• Fitted with double locking safety pin.
• Jack and axle stands supplied in carry/storage case.2tonne Short Chassis Trolley Jack with Axle Stands & Storage Case
• Chassis Length: 485mm.
• Lightweight heavy-duty construction.
• Supplied in tough storage case to keep dirty jack away from contents of car boot.
• Model No. 1050CXD• Steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• Suitable for the hobby user or as an emergency mobile jack.
• Includes one-piece pumping handle and carry handle.
• Supplied in tough storage case to keep dirty jack away from contents of car boot.2tonne Short Chassis Trolley Jack with Storage Case
• Chassis Length: 550mm.
• Lightweight heavy-duty construction.
• Supplied in tough carry/storage case to keep dirty jack away from contents of car boot.
• Model No. 1100CXD• Steel chassis with welded castor supports and one-piece hydraulic unit.
• Fitted with overload valve and finger cover for extra safety.
• At just 11kg this unit is ideal for the serious enthusiast or as an emergency mobile jack.
• Includes an integral carry handle and one-piece pumping handle.
• Supplied in tough carry/storage case to keep dirty jack away from contents of car boot.2tonne Short Chassis Trolley Jack with Storage Case
• Chassis Length: 690mm.
• Polyurethane wheels for smoother manoeuvrability and prevents damage to workshop floor.
• Single piece hydraulic unit with heavy base design.
• Integral American cog-type release mechanism and two-piece handle which is fitted with protective sleeve to help prevent damage to vehicle bodywork during use.
• Super Rocket Lift feature brings lifting arm straight into contact with jacking point with a single pump of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty castor wheels and 55mm wide front wheels for even load distribution.
• Supplied with foam jacking sleeve to prevent damage to the vehicles bodywork.
• Model No. 3200CXQP• Min./Max. Saddle Height: 145/504mm.
• Chassis Length: 690mm.
• Polyurethane wheels for smoother manoeuvrability and prevents damage to workshop floor.
• Single piece hydraulic unit with heavy base design.
• Integral American cog-type release mechanism and two-piece handle which is fitted with protective sleeve to help prevent damage to vehicle bodywork during use.
• Super Rocket Lift feature brings lifting arm straight into contact with jacking point with a single pump of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty castor wheels and 55mm wide front wheels for even load distribution.
• Supplied with foam jacking sleeve to prevent damage to the vehicles bodywork.3.2tonne Trolley Jack with Super Rocket Lift - PU Wheels
• Chassis Length: 625mm.
• High capacity, portable garage jack for serious hobby or recovery vehicle use.
• Heavy-duty one-piece hydraulic unit with overload protection.
• Model No. 1153CX• Long chassis, high capacity, portable garage jack for serious hobby or recovery vehicle use.
• Tough pump bracket and heavy-duty one-piece hydraulic unit with safety overload valve.
• Supplied with one-piece pumping handle with rubber grip.3tonne Long Chassis Heavy-Duty Trolley Jack
• Single-piece hydraulic unit with heavy chassis design.
• Integral American cog-type release mechanism and long two-piece handle.
• Heavy-duty castors and large saddle design ease positioning under vehicle.
• Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.
• Ideal for loaded vans up to 3.5tonne GVW.
• Model No. 3010CX
FREE
Ratchet Type Axle Stands 3tonne Capacity per Stand 6tonne per Pair
• Model No. VS1003
• List Price £29.95• Single-piece hydraulic unit with heavy chassis design.
• Integral American cog-type release mechanism and long two-piece handle.
• Heavy-duty castors and large saddle design ease positioning under vehicle.
• Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension.
• Ideal for loaded vans up to 3.5tonne GVW.
• Introductory Offer - Supplied with FREE Axle Stands - Packed inside box with Trolley Jack.
Model No. VS1003 - Axle Stands 3tonne Capacity per Stand 6tonne per Pair Ratchet Type3tonne Standard Chassis Trolley Jack
• Chassis Length: 690mm.
• Single piece hydraulic unit with heavy base design.
• Integral American cog-type release mechanism and two-piece handle.
• Super Rocket Lift feature brings lifting arm straight into contact with jacking point with a single pump of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty castor wheels and 55mm wide front wheels for even load distribution.
• Model No. 3003CXQ• Single-piece hydraulic unit with heavy base design.
• Integral cog-type release mechanism and two-piece handle.
• Super Rocket Lift feature brings lifting arm straight into contact with jacking point with a single pump of the handle.
• Integral saddle pad provides protection for the jacking point.
• Heavy-duty castors and 55mm wide front wheels for even load distribution.3tonne Professional Trolley Jack with Super Rocket Lift
- Air Jacks
- Axle Stands
- Bottle Jacks
- Cranes
- Engine Stands & Supports
- Forklift, Farm & Tractor Jacks
- Jacking Beams
- Load Handling
- Oil
- Ramps & Chocks
- Rotating Amber Beacons
- Scissor Jacks
- Tarpaulins
- Tow Poles & Ropes
- Towing Accessories
- Trailer Boards
- Transmission Jacks - Floor
- Transmission Jacks - Vertical
- Wheel Removal Trolleys
- Winches