Porsche
>
Boxster 986/987/981 (1997-2016)
>
Boxster 981 2.7L 2012-16
>
Suspension & Axle
>
Shock Absorber Parts FRONT
>
Front Leg Hexagon-Head Bolt. Porsche 993
Front Leg Hexagon-Head Bolt. Porsche 993 - 99906703901
Code: 99906703901
Front Leg Hexagon-Head Bolt. M 12 x 1,5 x 50.
Fits:
Porsche 993 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99906703901
The product you are viewing cross references to these numbers
Fits:
Porsche 993 1989-94
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99906703901
99906703901
99906703909
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Price: €34.64
In stock
Related products
Rennline Clubsport Camber Plate Top Mount Set for Porsche 991/981
Code: S54
Rennline Clubsport Camber Plate Top Mount Set.
SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
The product you are viewing cross references to these numbers
SET OF 2
Fits:
Porsche 991/981/718 2WD except GT3/GT4
Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.
• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S54
99134301502
982199131
982199131D
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€830.62
Now €814.01
In stock
Rennline Race Spec Camber Plate FRONT Top Mount Set for Porsche 991 / 981 / 718
Code: S55
Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
The product you are viewing cross references to these numbers
SET OF 2
Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT
If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.
this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.
These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.
Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.
• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S55
99134301502
982199131D
982199131
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€753.27
Now €738.20
In stock
Shock absorber upper strut mount Front. Porsche 991 / 981 Boxster/Cayman / 982 (718) Boxster/Cayman
Code: 99134301502
Shock absorber upper strut mount. Front.
Fits:
Porsche 991.1 C2 / C2S / C4 / C4S 2012-16
Porsche 991.2 C2 / C2S / C4 / C4S 017>>
Porsche 991 Turbo 2014>>
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C Cayman 2017>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134301502
The product you are viewing cross references to these numbers
Fits:
Porsche 991.1 C2 / C2S / C4 / C4S 2012-16
Porsche 991.2 C2 / C2S / C4 / C4S 017>>
Porsche 991 Turbo 2014>>
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C Cayman 2017>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134301502
99134301502
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Price: €302.77
Orderable